1. Introducció
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Savio WMS3600 Water Master Solids Submersible Pump. Please read these instructions thoroughly before use to ensure proper function and longevity of the product.
Image 1.1: Savio WMS3600 Water Master Solids Submersible Pump. This image displays the main unit of the submersible pump, highlighting its compact, black, cylindrical design with an integrated handle and a side outlet.
2. Informació de seguretat
Always observe the following safety precautions to reduce the risk of injury, electric shock, or product damage:
- Seguretat elèctrica: Ensure the pump is connected to a properly grounded outlet protected by a Ground Fault Circuit Interrupter (GFCI). Do not operate the pump if the power cord is damaged.
- Immersió: Aquesta bomba està dissenyada només per a ús submergible. No la feu funcionar en sec.
- Manipulació: Always disconnect power before handling, installing, or performing maintenance on the pump. Do not lift the pump by its power cord.
- Temperatura de l'aigua: Do not use the pump in water exceeding 95°F (35°C).
- Ús previst: Use this pump only for its intended purpose of circulating water in ponds and water features, handling solids up to 1 inch in diameter.
3. Característiques del producte
The Savio WMS3600 pump incorporates several design elements for reliable performance:
- Manipulació de sòlids: Capable of handling solids up to 1 inch in diameter, making it suitable for pond filtration and waterfalls.
- Construcció duradora: Features a ceramic-coated drive shaft and triple silicon carbide mechanical seals for extended operational life.
- Protecció del motor: Equipped with a precision-manufactured motor that includes thermal overload protection to prevent damage from overheating.
- Oil-Less Design: Safe for aquatic environments, including those with fish and plants.
- Non-Corrosive Housing: The pump's exterior is constructed from non-corrosive materials.
Image 3.1: Key features of the Savio WMS3600 pump. This image highlights the non-corrosive housing and the 1.25-inch output, along with text descriptions for solids handling, thermal overload protection, and factory testing.
4. Configuració i instal·lació
Follow these steps for proper installation of your submersible pump:
- Desembalatge: Carefully remove the pump from its packaging. Inspect for any visible damage.
- Col·locació: Position the pump on a stable, level surface within the pond or water feature. Ensure it is fully submerged and not resting directly on the bottom sediment. Using a pump stand or elevated platform is recommended to prevent clogging from debris.
- Connexió de la mànega: Connect appropriate hosing to the pump's outlet. The pump features a 1-1/2" outlet (with elbow). Secure the hose with a clamp per evitar fuites.
- Connexió elèctrica: Route the power cord safely to a GFCI-protected electrical outlet. Ensure the cord is not pinched or damaged. Do not use extension cords unless specifically rated for outdoor, wet conditions and properly grounded.
- Comprovació inicial: Before powering on, ensure all connections are secure and the pump is fully submerged in water.
5. Funcionament
Operating your Savio WMS3600 pump is straightforward:
- Encès: Plug the pump into the GFCI-protected outlet. The pump should start immediately, circulating water.
- Monitor de flux: Observe the water flow to ensure it is consistent and free of obstructions.
- Funcionament continu: This pump is designed for continuous operation. However, regular checks for debris accumulation are recommended.
- Apagar: Per apagar la bomba, simplement desendolleu-la de la presa de corrent.
6. Manteniment
Un manteniment regular garanteix un rendiment òptim i allarga la vida útil de la bomba:
- Desconnecteu l'alimentació: Desendolleu sempre la bomba abans de fer qualsevol manteniment.
- Clean Impeller and Housing: Periodically remove the pump from the water and inspect the impeller and pump housing for debris such as leaves, algae, or small stones. Clean these components using a soft brush and water.
- Comproveu el cable d'alimentació: Inspect the power cord for any signs of wear, cuts, or damage. Replace if necessary.
- Hivernització: In regions with freezing temperatures, remove the pump from the pond before the first freeze. Clean it thoroughly and store it in a frost-free location, submerged in a bucket of water to keep seals lubricated, or follow manufacturer's specific winterization guidelines.
7. Solució De Problemes
Consulteu aquesta secció per conèixer els problemes comuns i les seves solucions:
| Problema | Causa possible | Solució |
|---|---|---|
| Pump does not start or operate. | No power; GFCI tripped; clogged impeller; motor overload. | Check power connection and GFCI. Disconnect power, clear impeller, allow motor to cool if overloaded. |
| Reducció del cabal d'aigua. | Clogged intake or impeller; kinked or obstructed hose; low water level. | Disconnect power, clean intake and impeller. Check hose for obstructions. Ensure pump is fully submerged. |
| La bomba funciona però no flueix aigua. | Air lock; completely blocked intake/impeller. | Disconnect power, remove pump, shake gently to release air, re-submerge. Clear any severe blockages. |
| Pump trips GFCI repeatedly. | Electrical fault; damaged cord; water in motor housing. | Inspect cord for damage. If problem persists, discontinue use and contact qualified service personnel. |
8. Especificacions
Detailed technical specifications for the Savio WMS3600 Water Master Solids Submersible Pump:
| Atribut | Valor |
|---|---|
| Model | WMS3600 |
| Marca | Savio |
| Caudal màxim | 3,600 GPH (60 galons per minut) |
| Rang de funcionament òptim | 1440 gph - 2880 gph |
| Cap Màxim | 25 peus |
| Voltage | 115 Volts |
| Wattage | 650 watts |
| Ampedat | 6 Amps |
| Hertz | 60 Hz |
| Mida de sortida | 1-1/2" (with elbow) |
| Manipulació de sòlids | Up to 1 inch |
| Dimensions (L x A x A) | 10 x 8 x 14 polzades (aproximadament) |
| Pes de l'article | 8 lliures |
| Longitud del cable | 16 peus |
| Material | Plàstic |
| Font d'alimentació | AC |
| Color | Negre |
Image 8.1: Savio WMS3600 pump with approximate dimensions. The image shows the pump with labels indicating a height of 13"-14" and a width of 6".
Gràfiques de rendiment
Image 8.2: Savio Water Master Solids Specifications Chart. This chart provides detailed specifications for various WMS models, including dimensions, amps, watts, volts, outlet size, hertz, max flow, optimal operating range, max head, and average monthly operating cost.
Image 8.3: Water Master Solids Flow Rates (gallons per hour) versus Max Head Pressure (in feet) chart. This graph illustrates the performance curves for different Savio WMS pump models (WMS1450, WMS2050, WMS3600, WMS5000, WMS6500).
Image 8.4: Comparative specifications table for Savio Water Master Solids Pumps. This table lists pump model, dimensions, max flow, cord length, watts, volts, amps, and max head for various models.
9. Garantia i Suport
The Savio WMS3600 Water Master Solids Submersible Pump comes with a 2 any de garantia del fabricant. For warranty claims or technical support, please contact Savio customer service directly. Retain your proof of purchase for warranty validation.
For additional information or to locate authorized service centers, please visit the official Savio weblloc web o consulteu la informació de contacte que s'inclou amb l'embalatge del producte.
