Introducció
This manual provides essential information for the proper use and care of your BenQ OEM Projector Lamp. This replacement lamp and cage assembly is specifically designed for BenQ DS660, DX660, DS650, and DX650 series projectors, ensuring original factory quality and compatibility. Adhering to these instructions will help maximize the lamp's lifespan and maintain optimal projector performance.
Informació de seguretat
Please read and understand all safety precautions before handling or installing the projector lamp.
- No deixar caure: El lamp is fragile and can be damaged by impact. Handle with extreme care.
- Fragile Component: El lamp contains delicate components. Avoid touching the glass bulb directly.
- Alta temperatura: Projector lamps operate at very high temperatures. Allow the projector to cool down completely before attempting lamp substitució.
- Risc elèctric: Always disconnect the projector from the power source before opening the lamp compartiment.
- Eliminació adequada: Dispose of old lamps according to local regulations, as they may contain mercury.
Producte acabatview
An image showing the BenQ OEM Projector Lamp, which includes the lamp bulb housed within its protective cage, ready for installation into compatible BenQ projectors. The lamp assembly is designed for easy and secure fitting.
The BenQ OEM Projector Lamp is a complete module consisting of the lamp bulb and its housing. This design facilitates safe and straightforward replacement, ensuring proper alignment and electrical connection within your projector.
Setup (Lamp Replacement)
- Apagar i refredar: Turn off the projector and unplug the power cord. Allow the projector to cool for at least 30 minutes to prevent burns.
- Localitza Lamp Compartiment: Refer to your projector's specific user manual to locate the lamp compartment cover. This is typically on the top, side, or bottom of the projector.
- Traieu la coberta: Unscrew the screw(s) securing the lamp compartment cover and carefully remove it.
- Elimina la L antigaamp: Loosen the screw(s) holding the lamp module in place. Gently pull the handle on the lamp module to slide it out of the projector. Do not force it.
- Instal·la la nova Lamp: Carefully insert the new BenQ OEM Projector Lamp module into the slot, ensuring it slides in smoothly and is fully seated.
- Segur Lamp: Tighten the screw(s) to secure the new lamp mòdul.
- Substituïu la coberta: Torneu a connectar la lamp compartment cover and tighten its screw(s).
- Restablir Lamp Temporitzador: Després de substituir la lamp, it is crucial to reset the lamp timer in your projector's OSD (On-Screen Display) menu. Consult your projector's manual for specific instructions on how to do this.
Instruccions de funcionament
Once the new lamp està instal·lat i el lamp timer is reset, your projector is ready for operation. The lamp will illuminate when the projector is powered on and initialized. The brightness and color performance will be restored to optimal factory specifications.
- Període d'escalfament: Allow the projector a few minutes to warm up after turning it on for the lamp to reach full brightness and stable color output.
- Cool-down Cycle: Always allow the projector to complete its cool-down cycle after turning it off. Do not unplug the projector immediately after powering down, as this can shorten lamp vida.
Manteniment
Proper maintenance can extend the life of your projector and its lamp.
- Neteja del filtre d'aire: Regularly clean or replace the projector's air filter to ensure proper airflow and prevent the lamp from overheating. Refer to your projector's manual for filter maintenance.
- Condicions ambientals: Operate the projector in a clean, dust-free environment with adequate ventilation. Avoid extreme temperatures and humidity.
- Lamp Vida: The typical lifespan of a projector lamp is measured in hours. Replace the lamp when the image becomes dim, colors appear faded, or the projector displays a lamp replacement warning.
Resolució de problemes
If you encounter issues after lamp replacement, consider the following:
- Lamp Sense il·luminació:
- Assegureu-vos que lamp module is fully seated and secured with its screws.
- Comproveu que la lamp compartment cover is properly closed and secured.
- Verify the projector is receiving power and is turned on.
- Dim Image / Poor Color:
- Confirmeu la lamp timer was reset after installation.
- Check projector settings for brightness and color modes.
- Assegureu-vos que la lent del projector estigui neta.
- Lamp Warning Light Still On:
- This typically means the lamp timer was not reset. Follow the instructions in your projector's manual to reset it.
If problems persist, consult your BenQ projector's specific user manual or contact BenQ customer support.
Especificacions
| Característica | Especificació |
|---|---|
| Marca | BenQ |
| Número de model | 60.J3416.CB1 |
| Compatible Projector Series | DS660, DX660, DS650, DX650 |
| Wattage | 210 watts |
| Pes de l'article | 8 unces |
| Dimensions del producte | 5 x 5 x 4.88 polzades |
| Tipus de font de llum | Projector lamps |
| Color | Plata |
| Fabricant | BenQ |
Garantia i Suport
This BenQ OEM Projector Lamp is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official BenQ website. For technical support, troubleshooting assistance, or to inquire about warranty claims, please contact BenQ customer service through their official support channels.
Podeu trobar més informació i recursos de suport visitant la Botiga BenQ a Amazon.
