Manual d'usuari del soldador JBC 30ST

1. Introducció

This manual provides essential information for the safe and effective use of your JBC 30ST Soldering Iron. Designed for precision electronic work, this 25W soldering iron features a rapid heating system and is supplied with a durable, heat-resistant R-10D tip.

The JBC 30ST is a versatile tool, ideal for laboratory electronic work and circuit assembly, offering efficient heat utilization and quick temperature recovery.

2. Informació de seguretat

Always read and understand all safety warnings and instructions before using this product.

• Seguretat elèctrica: Ensure the soldering iron is connected to a properly grounded power outlet. Do not use with damaged cords or plugs. Disconnect from power when not in use or during maintenance.
• Risc de cremades: The soldering iron tip and surrounding metal parts reach very high temperatures (up to 380°C). Always use extreme caution to avoid contact with hot surfaces. Allow the iron to cool completely before storing.
• Fume Inhalation: Soldering produces fumes. Work in a well-ventilated area or use a fume extractor to avoid inhaling harmful fumes.
• Protecció ocular: Always wear safety glasses to protect your eyes from solder splashes or flying debris.
• Superfície de treball: Use a heat-resistant work surface. Keep flammable materials away from the soldering area.
• Nens i animals de companyia: Mantingueu el soldador fora de l'abast dels nens i les mascotes.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al vostre paquet:

• 1 x JBC 30ST Soldering Iron
• 1 x R-10D Heat-Resistant Long-Life Tip (pre-installed or separate)
• 1 x Three-conductor power cable

This image displays the retail packaging for the JBC 30ST Soldering Iron. The box features the JBC logo, website (www.jbctools.com), and product descriptions in multiple languages including English ('Pencil Soldering Iron'), Spanish, French, German, and Italian. The soldering iron itself, with its distinctive blue and black handle and silver tip, is visible on the right side of the packaging. The model number '30 ST' and power '230V-25W' are also printed on the side of the tool.

4. Configuració

1. Desembalatge: Traieu amb cura tots els components de l'embalatge.
2. Tip Installation (if not pre-installed): Ensure the soldering iron is unplugged and cool. Gently insert the R-10D tip into the heating element receptacle until it is seated firmly. Do not force it.
3. Connexió d'alimentació: Plug the three-conductor power cable into a compatible 220V grounded electrical outlet.
4. Escalfament inicial: Once plugged in, the soldering iron will begin to heat. It takes approximately 2 minutes and 15 seconds to reach 300°C, with a maximum operating temperature of 380°C.

5. Instruccions de funcionament

Follow these steps for effective soldering:

1. Estanyant la punta: Before first use and periodically during operation, apply a small amount of solder to the hot tip. This 'tins' the tip, protecting it from oxidation and ensuring efficient heat transfer.
2. Neteja de la punta: Utilitza l'anunciamp sponge or brass wool tip cleaner to wipe off excess solder and oxidation from the tip before and after each use.
3. Applying Heat: Place the clean, tinned tip against both the component lead and the solder pad simultaneously.
4. Applying Solder: Once the joint is hot enough (typically a few seconds), apply solder to the opposite side of the joint from the iron. The solder should flow smoothly and quickly around the joint. Do not apply solder directly to the iron tip.
5. Removing the Iron: Once the solder has flowed, remove the soldering iron first, then the solder. Allow the joint to cool undisturbed.
6. Refredament: When finished, unplug the soldering iron and place it in a safe, heat-resistant stand. Allow it to cool completely before handling or storing.

6. Manteniment

Un manteniment adequat allarga la vida útil del soldador:

• Neteja de consells: Regularly clean the tip using a damp sponge or brass wool. For stubborn oxidation, use a tip tinner/cleaner compound. A well-maintained tip will be shiny and accept solder easily.
• Substitució de la punta: Replace the tip when it becomes pitted, corroded, or no longer accepts solder easily, even after cleaning and tinning. Ensure the iron is cool and unplugged before changing tips.
• Handle and Cord: Keep the handle clean and free of solder. Inspect the power cord regularly for any signs of damage (cuts, fraying). If damaged, discontinue use and seek professional repair.
• Emmagatzematge: Store the soldering iron in a dry, safe place, away from dust and moisture, once it has completely cooled.

7. Solució De Problemes

8. Especificacions

9. Garantia i Suport

For warranty information, technical support, or spare parts availability, please refer to the official JBC website or contact your authorized JBC dealer. Keep your purchase receipt as proof of purchase.

JBC Official Weblloc: www.jbctools.com