1. Producte acabatview
The Magliner 121060 Air Tire 10" x 3.5" Pneumatic Wheel is designed as a component for building custom Magliner hand trucks or as a replacement part for existing Magliner hand trucks. This pneumatic wheel provides excellent shock absorption and smooth operation, suitable for various terrains. It features a durable 3-piece hub and precision sealed bearings for reliable performance.
Figure 1.1: The Magliner 121060 pneumatic wheel, featuring a 10-inch diameter air tire with a 3-piece hub and sealed bearings.
2. Especificacions
| Atribut | Detall |
|---|---|
| Número de model | 121060 (MAG-121060) |
| Tipus de pneumàtic | Pneumatic (Air) |
| Diàmetre de la roda | 10 polzades |
| Amplada de la vora | 3.5 polzades |
| Tipus de concentrador | 3-piece hub |
| Coixinets | 5/8" precision sealed bearings |
| Color | Carbon Black Saw Tooth Tread Pattern |
| Dimensions del producte | 12 x 12 x 12 polzades (dimensions aproximades d'enviament) |
| Pes | 4.5 lliures |
| UPC | 675706000441, 705332859806 |
Figure 2.1: Illustration showing the 3.5-inch rim width of the pneumatic wheel.
3. Configuració i instal·lació
This pneumatic wheel is designed for easy installation on Magliner hand trucks. It is important to note that two wheels are typically required per hand truck. Ensure you have the correct axle and cotter pins for secure attachment.
3.1 Eines necessàries
- Wrench (appropriate size for axle nuts, if applicable)
- Pliers (for cotter pins)
- Air pump with pressure gauge (for tire inflation)
3.2 Passos d'instal·lació
- Prepareu el carretó manual: If replacing an old wheel, remove the existing wheel by carefully removing the cotter pin and sliding the wheel off the axle. Clean the axle area if necessary.
- Inspect the New Wheel: Before installation, inspect the new Magliner 121060 wheel for any shipping damage. Verify the tire is adequately inflated (refer to tire sidewall for recommended PSI, typically around 40 PSI).
- Slide Wheel onto Axle: Carefully slide the new pneumatic wheel onto the hand truck's axle. Ensure the wheel is fully seated against any spacers or the hand truck frame.
- Assegurar la roda: Insert the cotter pin through the hole in the axle and bend its ends to secure the wheel in place. If using an axle nut, tighten it appropriately, ensuring the wheel spins freely but without excessive wobble.
- Check Inflation: Confirm the tire pressure is within the recommended range. Proper inflation is crucial for optimal performance and tire longevity.
Figure 3.1: The Magliner pneumatic wheel properly installed on a hand truck, ready for use.
4. Directrius de funcionament
Once installed, the Magliner 121060 pneumatic wheel operates as part of your hand truck system. Proper operation involves understanding its capabilities and limitations.
4.1 Capacitat de càrrega
The load capacity of your hand truck is determined by its weakest component. While this wheel is robust, always adhere to the overall load capacity specified for your Magliner hand truck model. Overloading can lead to premature wear of the wheel, bearings, or other hand truck components.
4.2 Terrain Considerations
Pneumatic tires are excellent for navigating uneven surfaces, gravel, grass, and other challenging terrains due to their shock-absorbing properties. However, avoid sharp objects that could puncture the tire. The saw-tooth tread pattern provides good grip on various surfaces.
Figura 4.1: Primer pla view of the carbon black saw-tooth tread pattern, designed for enhanced grip.
5. Manteniment
Regular maintenance will extend the life of your Magliner pneumatic wheel and ensure safe operation.
5.1 Pressió dels pneumàtics
- Check tire pressure regularly (e.g., monthly or before heavy use).
- Maintain recommended pressure (typically 40 PSI, check tire sidewall for exact specification). Under-inflation can lead to premature wear and reduced load capacity.
5.2 Inspecció de rodaments
- Periodically check the 5/8" precision sealed bearings for smooth rotation and absence of excessive play.
- Sealed bearings generally do not require lubrication, but ensure they are free from dirt and debris.
5.3 Neteja i emmagatzematge generals
- Keep the wheel clean from excessive dirt, mud, or corrosive substances.
- Store the hand truck in a dry environment to prevent rust on metal components.
6. Solució De Problemes
Common issues and their solutions for the Magliner 121060 pneumatic wheel.
| Problema | Causa possible | Solució |
|---|---|---|
| Tire is flat or losing air quickly. | Puncture, leaky valve stem, or loose valve core. | Inspect tire for punctures. Replace inner tube if punctured. Tighten valve core or replace valve stem. |
| Wheel wobbles excessively. | Loose axle nut/cotter pin, worn bearings, or bent axle. | Ensure axle nut/cotter pin is secure. Inspect bearings for wear and replace if necessary. Check axle for straightness. |
| Wheel is difficult to rotate. | Damaged or seized bearings, excessive friction from axle/frame. | Inspect and replace bearings if damaged. Ensure no foreign objects are obstructing rotation. |
7. Garantia i Suport
Magliner products are known for their durability and quality. For specific warranty information regarding the 121060 pneumatic wheel, please refer to the official Magliner warranty policy available on their weblloc web o contacteu directament amb el seu servei d'atenció al client.
7.1 Informació de contacte
- Fabricant: Magliner
- Weblloc: www.magliner.com (for general information and support)
- Atenció al client: Refer to the Magliner website for current contact methods (phone, email, support forms).
Quan contacteu amb el servei d'assistència, tingueu a mà el número de model del producte (121060) i qualsevol informació de compra rellevant.
