Producte acabatview
The Moen One-Handle Posi-Temp Faucet Cartridge Replacement, Model 1222, is designed for quick and straightforward replacement in Moen Posi-Temp tub shower and shower-only faucet configurations. This cartridge is crucial for maintaining consistent water pressure and temperature, addressing common issues such as leaks or difficulty in adjusting water flow.
Característiques clau
- Peça de recanvi: Ideal for repairing problematic shower valve plumbing fixtures without full replacement.
- Instal·lació sense problemes: Designed for ease of installation.
- Inclou: Moen 1222 One-Handle Posi-Temp Faucet Cartridge Replacement for Moen Tub Shower and Shower Configurations.
- Fabricant d'equips originals: Authentic Moen faucet replacement part.
- Construcció duradora: Made from durable plastic and brass components.
- Consistent Temperature: Posi-Temp valve system helps maintain consistent water pressure and temperature.
Image: The Moen 1222 Posi-Temp Faucet Replacement Cartridge, a white and brass component with black seals.
Guia d'instal·lació
Precaucions de seguretat
- Always shut off the main water supply before beginning any plumbing work.
- Utilitzeu equips de protecció individual adequats, com ara ulleres de seguretat.
- Assegureu-vos que l'àrea de treball estigui clara i ben il·luminada.
Eines necessàries
- Destornillador Phillips
- Hex or Allen Wrench (for handle set screw)
- Adjustable Pliers or Channel Lock Pliers
- Alicates de punta d'agulla
- Moen Cartridge Removal Tool (recommended for easier removal, sold separately)
- Small flathead screwdriver (for clip removal)
Preparació
- Tancament del subministrament d'aigua: Locate and turn off the main water supply to your home or the specific shut-off valves for the shower.
- Relieve Water Pressure: Open the shower handle to relieve any remaining water pressure and drain the lines.
Extracció del cartutx
- Traieu la nansa: Use a hex or Allen wrench to unthread the set screw on the shower handle and detach it.
- Remove Handle Adapter: Loosen the handle adapter screw with a Phillips screwdriver and remove the adapter.
- Remove Key Stop and Stop Tube: Pull off the key stop and the adjustable temperature limit stop, followed by the stop tube.
- Treure el clip de retenció: Using needlenose pliers, carefully pull out the cartridge retaining clip. Ensure it does not fall into the wall cavity.
- Treure el cartutx antic: Ensure the cartridge is in the "on" position (notch in the stem facing up). Use adjustable pliers or a Moen Cartridge Removal Tool to twist and pull the old cartridge from the valve body.
Video: Official Moen guide demonstrating the removal and installation of the 1222 Posi-Temp Cartridge.
New Cartridge Installation
- Aplicar lubricant: Apply the provided silicone lubricant to the cartridge's oval seals on both sides.
- Orient New Cartridge: Ensure the "HC" symbol and the notch in the cartridge stem are facing upwards.
- Inseriu un cartutx nou: Insert the new 1222 cartridge into the valve body. It should slide in smoothly.
- Reinsert Retaining Clip: Reinsert the retaining clip to secure the cartridge in place.
- Reinstall Stop Tube, Temperature Limit Stop, and Key Stop: Slide these components back onto the valve stem in the reverse order of removal.
- Reinstall Handle Adapter and Handle: Secure the handle adapter with its screw, then reattach the handle and tighten its set screw.
- Restaurar el subministrament d'aigua: Torneu a obrir lentament el subministrament principal d'aigua i comproveu si hi ha fuites.
Image: A hand inserting the new Moen 1222 Posi-Temp Faucet Replacement Cartridge into the shower valve.
Funcionament
The Moen Posi-Temp valve system is designed to maintain consistent water pressure and temperature. Once installed, the cartridge ensures that your shower maintains the desired temperature, preventing sudden fluctuations in hot or cold water, even when other water sources in the house are used.
Manteniment
To ensure the longevity and optimal performance of your Moen Posi-Temp cartridge, periodic maintenance may be beneficial, especially in areas with hard water.
- Neteja: If you notice stiffness in the handle or reduced performance, mineral deposits (calcium and lime) may have accumulated. Disassemble the valve as per the removal instructions and clean the valve body and cartridge components with a suitable cleaner (e.g., CLR) and a soft cloth.
- Lubricació: Reapply silicone lubricant to the cartridge seals during reassembly to ensure smooth operation.
- Comprovacions periòdiques: Periodically check for leaks around the handle or showerhead. Early detection can prevent further damage.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Faucet is leaking or dripping. | Worn or damaged cartridge seals. | Replace the Moen 1222 cartridge. |
| Difficulty turning the handle (stiff). | Mineral buildup or worn internal components. | Remove, clean, and lubricate the cartridge. If problem persists, replace the cartridge. |
| Temperatura de l'aigua inconsistent. | Faulty Posi-Temp cartridge or debris affecting flow. | Inspect and clean the cartridge. Ensure it is correctly installed. Replace if necessary. |
| Sense aigua calenta o freda. | Cartridge installed incorrectly (reversed) or internal damage. | Check cartridge orientation (HC symbol up). Remove and reinsert correctly. Replace if damaged. |
Especificacions
| Atribut | Detall |
|---|---|
| Marca | Moen |
| Número de model | 1222 |
| Material | Plàstic, Llautó |
| Pes de l'article | 0.32 unces |
| Dimensions del producte | 1.25 x 2.13 x 6.5 polzades |
| Components inclosos | Recanvis o kit de servei |
Informació de la garantia
The Moen 1222 Posi-Temp Faucet Replacement Cartridge is backed by Moen's One Year Limited Warranty. For specific terms and conditions, please refer to the official Moen warranty documentation or contact Moen customer service.
Atenció al client
For further assistance, technical support, or to inquire about other Moen products, please contact Moen Customer Service at 1-800-BUY-MOEN or visit the official Moen weblloc.
