Introducció
This manual provides instructions for the proper setup, operation, and maintenance of your Nelson 50210 Pulsating Sprinkler. This sprinkler is designed to provide efficient and adjustable watering for various lawn and garden areas. Please read these instructions carefully before use to ensure optimal performance and longevity of your product.
Producte acabatview
The Nelson 50210 Pulsating Sprinkler features a Rezimar head and a spiked base for stability. It is capable of covering areas up to 90 feet in diameter and can be connected in series with other sprinklers for extended coverage.
Image 1: Nelson 50210 Pulsating Sprinkler. This image shows the complete sprinkler unit, featuring a brown base with yellow accents, a central pulsating head, and a spiked base for ground insertion.
Instruccions de configuració
- Desempaquetar l'aspersor: Traieu amb cura l'aspersor del seu embalatge. Inspeccioneu-lo per veure si hi ha algun dany.
- Posicionament: Place the sprinkler in the desired watering area. The spiked base provides stability in softer ground. For harder ground, ensure the spikes can penetrate sufficiently.
- Connexió de la mànega: Connect a standard garden hose to the inlet connection on the sprinkler base. Ensure the connection is tight to prevent leaks.
- Series Connection (Optional): If connecting multiple sprinklers in series, attach the first sprinkler's outlet to the inlet of the next sprinkler using an additional hose. This allows for larger area coverage.
Instruccions de funcionament
The Nelson 50210 Pulsating Sprinkler offers adjustable settings for spray pattern and distance.
- Flux d'aigua: Slowly turn on the water supply. Observe the sprinkler's operation.
- Adjusting Spray Distance: The large poly head allows for easy adjustment of the spray distance. Rotate the adjustment knob or lever on the sprinkler head to increase or decrease the water stream's reach.
- Adjusting Spray Pattern (Arc):
- To set a partial circle, use the two yellow clips located at the base of the pulsating head. Move these clips to define the start and end points of the desired watering arc.
- For full 360-degree coverage, move both clips out of the way, allowing the sprinkler head to rotate freely.
- Impact Adjustment: Some pulsating sprinklers feature an impact adjustment screw or pin. Adjusting this can change the force of the water stream, affecting both distance and spray pattern. Refer to the specific design of your sprinkler head for this feature.
Manteniment
- Broquet de neteja: Periodically check the sprinkler nozzle for clogs from debris or mineral deposits. If clogged, gently clear with a small wire or needle.
- Emmagatzematge d'hivern: Abans de baixar les temperatures de congelació, desconnecteu l'aspersor de la mànega i buideu tota l'aigua. Guardeu l'aspersor en un lloc sec i protegit per evitar danys per congelació.
- Hose Washer: Inspect the hose washer at the inlet connection regularly. Replace if worn or damaged to prevent leaks.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Sprinkler not rotating or rotating slowly. | Low water pressure, clogged nozzle, or debris in the rotating mechanism. | Increase water pressure, clean the nozzle, or clear debris from the rotating parts. Ensure arc clips are not obstructing movement for 360-degree rotation. |
| Distribució desigual de l'aigua. | Incorrect spray distance or pattern adjustment. | Adjust the spray distance and arc settings as described in the Operating Instructions. |
| Fuita d'aigua per la connexió de la mànega. | Loose connection or worn hose washer. | Tighten the hose connection. Inspect and replace the hose washer if necessary. |
| Sprinkler falls over. | Spikes not fully inserted or ground is too soft/unstable. | Ensure spikes are firmly pressed into the ground. If the ground is excessively soft, consider repositioning or reinforcing the base. |
Especificacions
- Marca: Nelson
- Número de model: 50210
- Material: Metal (Rezimar Head, Metal Ergo Swivel)
- Estil: Circular, Pulsating
- Cobertura: Up to 90 foot diameter
- Tipus de base: Spiked Base (Oval, 2 metal spike stabilizers)
- Dimensions (L x A x A): 12.5 x 10.3 x 2.5 polzades
- Pes de l'article: 1.1 lliures
- UPC: 077855805586
Garantia i Suport
Per obtenir informació sobre la garantia o assistència tècnica, consulteu el lloc web oficial del fabricant. weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el rebut de compra com a comprovant de compra.
