Introducció
This manual provides essential information for the proper setup, operation, and maintenance of your Sennheiser MKE 400 Shotgun Microphone. The MKE 400 is a compact shotgun microphone designed for camcorders, offering a supercardioid lobar frequency response, switchable sensitivity, and a switchable wind noise filter. Its rugged all-metal housing ensures durability.
Informació de seguretat
Please read and follow all safety instructions to prevent damage to the device or injury to yourself. Keep this manual for future reference.
- No exposeu el micròfon a temperatures extremes, humitat ni llum solar directa.
- Avoid dropping or subjecting the microphone to strong impacts.
- Do not attempt to disassemble or modify the microphone. Repairs should only be performed by authorized service personnel.
- Mantingueu les piles fora de l'abast dels nens. Elimineu les piles usades d'acord amb la normativa local.
Contingut del paquet
Assegureu-vos que tots els elements estiguin presents al vostre paquet:
- Sennheiser MKE 400 Shotgun Microphone
- 1 bateria AAA
- Parabrisa d'escuma
Producte acabatview
Familiarize yourself with the components of your MKE 400 microphone.
Figure 1: Sennheiser MKE 400 Shotgun Microphone mounted on a camcorder, showing its compact size and position.
Figura 2: posterior view of the MKE 400 microphone, highlighting the 3.5mm MIC OUT port for connecting to your camera.
Figura 3: lateral view of the MKE 400, showing the control switches for sensitivity adjustment and the wind noise filter.
Figura 4: Part inferior view of the MKE 400, illustrating the battery compartment for the single AAA battery.
Configuració
- Instal·lació de la bateria:
- Locate the battery compartment on the underside of the microphone (refer to Figure 4).
- Feu lliscar la tapa de la bateria.
- Inseriu una pila AAA, assegurant-vos de la polaritat correcta (+/-).
- Tanqueu la tapa de la bateria amb seguretat.
- Muntatge del micròfon:
- The MKE 400 features an integral shock mount with a standard hot shoe mount. Slide the microphone onto your camera's hot shoe until it clicks into place.
- Alternatively, the microphone base includes a threaded end for mounting onto a tripod or stand.
- Connexió a la càmera:
- Connect the 3.5mm audio cable from the microphone's "MIC OUT" port (refer to Figure 2) to your camera's external microphone input.
Instruccions de funcionament
- Encès/apagat:
- Locate the ON/OFF switch on the side of the microphone (refer to Figure 3).
- Slide the switch to the "ON" position to power on the microphone. A battery indicator light will illuminate.
- Feu lliscar l'interruptor a la posició "OFF" quan no l'utilitzeu per estalviar bateria.
- Ajust de la sensibilitat:
- The MKE 400 features a switchable sensitivity setting for long and short distances.
- Use the volume control switch (labeled "+ Vol -" or similar, refer to Figure 3) to adjust the microphone's input level.
- For louder sound sources or closer proximity, select a lower sensitivity setting. For quieter sources or greater distance, select a higher sensitivity setting.
- Using the Wind Noise Filter:
- The microphone includes a switchable wind noise filter to reduce unwanted ambient noise, especially in outdoor environments.
- Locate the wind noise filter switch (often labeled with a wind icon, refer to Figure 3) and activate it when needed.
- For optimal wind noise reduction, attach the included foam windshield (refer to Figure 1).
- Indicador de bateria:
- The battery indicator light provides feedback on battery status. A steady light typically indicates sufficient power, while a flashing light may signal low battery.
Manteniment
- Neteja: Use a soft, dry cloth to clean the microphone's exterior. Do not use liquid cleaners or solvents.
- Substitució de la bateria: Replace the AAA battery when the battery indicator signals low power. Always use fresh, high-quality batteries.
- Emmagatzematge: Store the microphone in a dry, cool place away from direct sunlight and extreme temperatures. When storing for extended periods, remove the battery to prevent leakage.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Sense sortida de so | Microphone is off; low battery; incorrect cable connection; camera input settings. | Ensure microphone is ON; replace battery; check cable connection to camera's MIC IN; verify camera's audio input settings. |
| So distorsionat | Input level too high; microphone too close to sound source. | Reduce microphone sensitivity using the switch; increase distance from sound source. |
| Soroll del vent excessiu | Wind noise filter is off; no foam windshield. | Activate the wind noise filter; attach the foam windshield. |
Especificacions
- Model: MKE 400
- Patró polar: Unidirectional (Supercardioid Lobar)
- Font d'alimentació: 1 bateria AAA (inclosa)
- Temps de funcionament: More than 300 hours (from 1 AAA battery)
- Tipus de connector: 3.5 mm Jack
- Habitatge: Rugged all-metal
- Dimensions (L x A x A): Aproximadament 0.83 x 5.12 x 2.44 polzades
- Pes de l'article: Aproximadament 9.4 unces
- Dispositius compatibles: Camera (with standard hot shoe mount and external microphone input)
Garantia i Suport
Sennheiser products are designed for reliability and performance. This product is covered by a manufacturer's warranty. For detailed warranty information, product registration, or technical support, please visit the official Sennheiser weblloc o poseu-vos en contacte amb el seu servei d'atenció al client.
Podeu trobar més informació i recursos de suport a Botiga Sennheiser a Amazon.
