Neumann U 87 Ai Switchable Studio Microphone

Introducció

The Neumann U 87 Ai is a large-diaphragm condenser microphone, recognized as an industry standard for professional audio recording. This microphone features three selectable polar patterns, a switchable high-pass filter, and a 10dB pre-attenuation pad, making it versatile for various recording applications. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your U 87 Ai microphone.

Informació important de seguretat

• Always handle the microphone with care to prevent damage to the sensitive capsule.
• Ensure the microphone is securely mounted on a stand using the provided shockmount to avoid accidental drops.
• The U 87 Ai requires 48V phantom power. Connect it only to equipment that provides standard phantom power.
• Avoid exposing the microphone to extreme temperatures, high humidity, or direct moisture.
• Do not attempt to open or service the microphone yourself. Refer all servicing to qualified personnel.
• Mantingueu el micròfon lluny de camps magnètics forts.

Contingut del paquet

Verifiqueu que tots els elements siguin presents al vostre paquet:

• Neumann U 87 Ai Studio Microphone
• EA87 Shockmount
• Parabrisa
• Cable XLR
• Wooden Jeweler's Box

Image: The Neumann U 87 Ai microphone resting securely within its custom-fitted wooden storage box, indicating careful packaging.

Configuració

1. Desembalatge

Carefully remove the microphone and its accessories from the wooden box. Inspect all components for any signs of damage.

2. Muntatge del micròfon

Attach the EA87 shockmount to a suitable microphone stand. Gently insert the U 87 Ai microphone into the shockmount, ensuring it is held firmly but without excessive force. The shockmount helps to isolate the microphone from vibrations transmitted through the stand.

3. Connexió del micròfon

Connect the provided XLR cable to the 3-pin XLR connector at the base of the microphone. Connect the other end of the XLR cable to a microphone preamplifier, audio interface, or mixing console that supplies 48V phantom power. Ensure phantom power is turned off on your device before connecting or disconnecting the microphone to prevent potential damage.

Funcionament del micròfon

1. Polar Patterns

The U 87 Ai offers three selectable polar patterns: omnidirectional, cardioid, and figure-8. These patterns determine the microphone's sensitivity to sound from different directions.

• Omnidireccional: Picks up sound equally from all directions. Ideal for capturing room ambiance or multiple sources.
• Cardioide: Most sensitive to sound from the front, with significant rejection from the rear. Suitable for vocals and isolating individual instruments.
• Figura 8: Equally sensitive to sound from the front and rear, with rejection from the sides. Useful for recording two vocalists facing each other or for M/S stereo techniques.

The polar pattern switch is located on the front of the microphone body, below the grille.

Imatge: Una imatge detallada view of the polar pattern switch on the microphone body, showing the symbols for omnidirectional, cardioid, and figure-8 patterns.

2. Pre-attenuation Pad (-10dB)

The U 87 Ai features a switchable -10dB pre-attenuation pad. This pad reduces the microphone's output level by 10 decibels, preventing distortion when recording very loud sound sources, such as close-miked drums or guitar amplifiers. Engage this switch when the input signal is too hot for your preampmés viu.

Image: A close-up of the -10dB pad switch, clearly labeled, on the side of the microphone body.

3. Low-Frequency Roll-off

A switchable low-frequency roll-off (high-pass filter) is integrated into the U 87 Ai. This filter attenuates frequencies below approximately 100 Hz, which can be useful for reducing unwanted rumble, handling noise, or proximity effect when close-miking. The switch for the low-frequency roll-off is typically located near the polar pattern and pad switches.

4. Col·locació òptima

Microphone placement significantly impacts the recorded sound. Experiment with distance and angle relative to the sound source to achieve the desired tonal balance and minimize unwanted room reflections. For vocals, a pop filter is recommended to reduce plosives.

Manteniment i cura

• Neteja: Use a soft, dry cloth to wipe the microphone body. Do not use liquid cleaners or solvents, as they can damage the finish or internal components.
• Emmagatzematge: When not in use, store the microphone in its original wooden box or a protective case to shield it from dust, moisture, and physical impact.
• Manipulació: Avoid dropping or subjecting the microphone to harsh impacts. The capsule is a delicate component.
• Medi ambient: Operate and store the microphone in a clean, dry environment with stable temperature and humidity.

Resolució de problemes

• Sense so:
  • Ensure 48V phantom power is enabled on your preamplifier o interfície d'àudio.
  • Check all XLR cable connections for proper seating.
  • Prova amb un cable XLR diferent.
  • Verify that the input gain on your preamplifier is set appropriately.
• So distorsionat:
  • If recording loud sources, engage the -10dB pre-attenuation pad on the microphone.
  • Reduce the input gain on your preampmés viu.
  • Assegureu-vos que el micròfon no estigui sobrecarregat per fonts de so excessivament altes.
• Excessive Bass/Rumble:
  • Engage the low-frequency roll-off switch on the microphone.
  • Increase the distance between the microphone and the sound source to reduce proximity effect.
• Intermittent Sound/Noise:
  • Check for faulty cables or connectors.
  • Ensure proper grounding of all audio equipment.
  • Verify that the microphone is not picking up electrical interference from other devices.

Especificacions tècniques

Garantia i Suport

The Neumann U 87 Ai microphone is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Neumann website. For technical support, service, or replacement parts, please contact an authorized Neumann service center or your dealer.

Podeu trobar més informació i recursos de suport a Neumann Store on Amazon.

Informació d'eliminació

Do not dispose of this product with household waste. Electronic equipment contains materials that can be harmful to the environment if not disposed of properly. Please consult your local authorities for information on proper disposal and recycling options for electronic devices.