Introducció
This manual provides essential information for the safe and effective use, installation, and maintenance of your Oregon 94-026 Replacement Lawn Mower Blade. Please read this manual thoroughly before attempting any installation or maintenance procedures. Proper handling and care will ensure optimal performance and longevity of the blade.
Informació important de seguretat
Prioritzeu sempre la seguretat quan treballeu amb fulles de tallagespa. Si no seguiu aquestes pautes de seguretat, podeu patir lesions greus.
- Always disconnect the spark plug wire or remove the battery from electric mowers before performing any maintenance or blade replacement.
- Wear heavy-duty gloves to protect your hands from sharp edges.
- Feu servir ulleres de seguretat per protegir els ulls dels residus.
- Ensure the mower is stable and cannot roll or tip over during blade replacement.
- Never attempt to sharpen or balance a damaged blade. Replace it immediately.
- Mantenir els nens i les mascotes lluny de la zona de treball.
Configuració i instal·lació
Replacing your lawn mower blade is a critical maintenance task. Follow these steps carefully.
Eines necessàries:
- Guants de treball resistents
- Ulleres de seguretat
- Wrench or socket set (size may vary by mower model)
- Eina d'extracció de blocs de fusta o fulles
- Wire brush (for cleaning)
Blade Replacement Procedure:
- Prepareu la segadora: Disconnect the spark plug wire (gas mowers) or remove the battery (electric mowers) to prevent accidental starting. Position the mower on a flat, stable surface. If possible, tilt the mower so the carburetor side is up to prevent fuel leakage.
- Assegureu la fulla: Col·loqueu un bloc de fusta entre la fulla i la plataforma de la tallagespa per evitar que la fulla giri mentre afluixeu el cargol.
- Traieu la fulla antiga: Using the appropriate wrench or socket, loosen the blade bolt by turning it counter-clockwise. Once loose, remove the bolt, washer, and the old blade. Note the orientation of the old blade for correct installation of the new one.
- Inspeccionar i netejar: Inspect the blade mounting area for any damage or wear. Clean any accumulated grass clippings or debris from the underside of the mower deck and around the blade spindle using a wire brush.
- Instal·leu el nou Blade: Position the new Oregon 94-026 blade onto the spindle, ensuring the cutting edge faces the correct direction (typically towards the direction of rotation, with the curved 'wing' pointing upwards towards the deck). The center hole of the blade should align perfectly with the spindle.
- Secure the New Blade: Place the washer and blade bolt back onto the spindle. Hand-tighten the bolt, then use your wrench or socket to tighten it securely. Use the wood block again to prevent the blade from turning. Refer to your mower's owner's manual for specific torque specifications, if available.
- Comprovació final: Ensure the blade is firmly attached and spins freely without wobbling. Reconnect the spark plug wire or reinsert the battery.
Figura 1: De dalt a baix view of the Oregon 94-026 replacement lawn mower blade, highlighting its overall shape and central mounting hole.
Figura 2: Angle view of the Oregon 94-026 replacement lawn mower blade, illustrating its formed profile and sharpened cutting edge.
Pautes de funcionament
Once the new blade is installed, observe these general operating guidelines for optimal cutting performance and safety:
- Always ensure the mower deck is set to an appropriate cutting height for your lawn type.
- Avoid mowing wet grass, as it can clog the deck and lead to an uneven cut.
- Clear the mowing area of any debris (rocks, sticks, toys) that could damage the blade or be ejected.
- Mow at a consistent speed to achieve an even cut.
- Overlap your mowing passes slightly to avoid leaving uncut strips.
Manteniment
Regular maintenance of your blade ensures a clean cut and extends its lifespan.
- Neteja: After each use, clean grass clippings and debris from the blade and the underside of the mower deck. This prevents rust and maintains balance.
- Inspecció: Regularly inspect the blade for nicks, bends, or cracks. A damaged blade can cause excessive vibration and an uneven cut. Replace severely damaged blades immediately.
- Afilat: Sharpen the blade periodically to maintain a keen cutting edge. A dull blade tears grass, leading to an unhealthy lawn. Use a blade sharpener or file, maintaining the original blade angle. Ensure the blade remains balanced after sharpening. If you are unsure, consult a professional.
- Equilibri: An unbalanced blade can cause excessive vibration, leading to premature wear on mower components. After sharpening, check the blade's balance using a blade balancer. If unbalanced, remove a small amount of metal from the heavier side until balanced.
Resolució de problemes
Refer to the table below for common issues and their potential solutions related to your mower blade.
| Problema | Causa possible | Solució |
|---|---|---|
| Uneven cut / Ragged grass tips | Dull blade, bent blade, incorrect blade installation | Sharpen or replace blade, check blade for bends, ensure correct installation. |
| Excessive mower vibration | Unbalanced blade, bent blade, loose blade bolt | Balance or replace blade, check blade for bends, tighten blade bolt securely. |
| Poor grass discharge / Clogging | Dull blade, wet grass, excessive grass height | Sharpen blade, avoid mowing wet grass, mow more frequently or raise cutting height. |
Especificacions
Key specifications for the Oregon 94-026 Replacement Lawn Mower Blade:
- Número de model: 94-026
- Marca: Oregon
- Longitud: 15-1/2 polzades
- Center Hole: 5/8 polzades
- Plane Type: Formada
- Pes de l'article: Aproximadament 1.9 lliures
- UPC: 032488940264
- Replaces OEM Parts: Toro - 104-1300, 100-6490-03, 108-1116, 106-0627, 44-5480, 54-0010, 106-0630, 55-4940, 92-7952, 108-1125, 54-0010-03, and others.
Garantia i Suport
For specific warranty information regarding your Oregon 94-026 Replacement Lawn Mower Blade, please refer to the packaging or contact Oregon customer support directly. For technical assistance or further inquiries, please visit the official Oregon weblloc o poseu-vos en contacte amb el seu departament d'atenció al client.
