1. Introducció
Thank you for choosing the Progress Lighting P8072-28 Recessed Trim. This incandescent open splay recessed trim features a white powdercoat finish and is designed for use with insulated ceilings. It has a 7-3/4 inch outside diameter and is intended for use with compatible Progress 6-inch recessed lighting housings (P87, P187, P83, P88, P82). Please read these instructions carefully before installation and use to ensure proper function and safety.
Figura 1.1: Frontal view of the P8072-28 Recessed Trim with an incandescent bulb installed.
2. Informació de seguretat
ADVERTIMENT: Risk of electric shock. Disconnect power at the fuse box or circuit breaker before installation or servicing. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- Do not install this trim with non-compatible recessed housings. Compatibility is specified for Progress 6-inch recessed housings (P87, P187, P83, P88, P82).
- Refer to the housing's specifications for maximum wattage. This trim is rated for up to 250 watts at 120 volts.
- Assegureu-vos que totes les connexions estiguin segures i aïllades correctament.
- No modifiqueu el producte de cap manera.
3. Llista de components
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- P8072-28 Recessed Trim (1 unit)
- Product and Installation Sheet (this document)
Note: Recessed housing and incandescent bulb are sold separately.
4. Configuració i instal·lació
This trim is designed for easy installation into compatible 6-inch recessed housings. The trim mounts to the can with a 2-inch by 7-inch leaf spring mechanism, which pulls the trim tightly to the ceiling.
- Apagueu l'alimentació: Before starting, ensure the power to the circuit is turned off at the circuit breaker or fuse box.
- Preparar l'habitatge: Ensure the recessed housing (e.g., P87, P187) is properly installed in the ceiling according to its own instruction manual.
- Connecta el sòcol: El lamp socket from the recessed housing attaches directly to the trim. This eliminates the need for an adjustable socket mount within the housing. Secure the socket to the designated attachment point on the trim.
- Instal·leu la bombeta: Screw the appropriate incandescent bulb (up to 250W) into the socket.
- Insert Trim: Carefully push the trim assembly, with the bulb and socket attached, into the recessed housing opening. The leaf springs on the trim will compress and then expand to firmly hold the trim against the ceiling. Apply firm, even pressure until the trim is flush with the ceiling surface.
- Restaura l'alimentació: Once the trim is securely in place, restore power at the circuit breaker or fuse box and test the light.
Figura 4.1: De dalt a baix view of the P8072-28 Recessed Trim, illustrating the open splay design.
Figure 4.2: Dimensions of the P8072-28 Recessed Trim, showing a 7-3/4 inch outside diameter.
5. Instruccions de funcionament
The P8072-28 Recessed Trim operates in conjunction with your installed recessed housing and a compatible incandescent bulb. Operation is controlled via a standard wall switch connected to the lighting circuit.
- Assegureu-vos el wat correctetage bulb (up to 250W) is installed.
- Feu servir l'interruptor de paret per encendre o apagar el llum.
6. Manteniment
The P8072-28 Recessed Trim requires minimal maintenance.
- Neteja: To clean the trim, ensure power is off. Wipe with a soft, dry or slightly damp drap. No utilitzeu netejadors abrasius ni dissolvents, ja que poden danyar l'acabat.
- Substitució de bombetes: Turn off power at the circuit breaker. Carefully pull the trim down from the ceiling to access the bulb. Unscrew the old bulb and screw in a new one of the correct type and wattage. Reinsert the trim firmly into the housing.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | No hi ha energia a l’aparell. La bombeta està solta o cremada. Cablejat incorrecte. | Comproveu l'interruptor/fusible. Apretar o substituir la bombeta. Consulteu un electricista qualificat per comprovar el cablejat. |
| Trim does not sit flush with ceiling. | Improper installation of leaf springs. Housing not properly installed. | Ensure leaf springs are fully engaged. Verify housing installation according to its manual. |
| La llum parpelleja. | Bombeta solta. Interruptor regulador d'intensitat incompatible. Problema de cablejat. | Apretar la bombeta. Ensure dimmer is compatible with incandescent lights. Consulteu un electricista qualificat. |
8. Especificacions
| Característica | Detall |
|---|---|
| Número de model | P8072-28 |
| Marca | Il·luminació de progrés |
| Tipus | Recessed Trim (Open Splay) |
| Color | Blanc |
| Material | Alumini |
| Diàmetre exterior | 7-3/4 polzades (19.69 cm) |
| Dimensions del producte (L x A x A) | 7.75" x 7.75" x 4.75" (19.69 cm x 19.69 cm x 12.07 cm) |
| Pes de l'article | 5.9 unces (167 grams) |
| Voltage | 120 Volts |
| Max Wattage | 250 watts (incandescents) |
| Font d'alimentació | Elèctric amb cable |
| Ús interior/exterior | Interior |
| Habitatges compatibles | Progress 6-inch recessed housings (P87, P187, P83, P88, P82) |
| UPC | 785247807222 |
9. Informació de la garantia
This Progress Lighting P8072-28 Recessed Trim comes with a Garantia limitada d'1 any from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized modification. For warranty claims, please retain your proof of purchase and contact Progress Lighting customer support.
10. Suport i contacte
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Progress Lighting customer support. Visit the official Progress Lighting weblloc web per obtenir la informació de contacte més actualitzada.
Progress Lighting Official Weblloc: Visit the Progress Lighting Store on Amazon
