Progress Lighting P7206-30EB Fluorescent Light Fixture User Manual

Producte acabatview

The Progress Lighting P7206-30EB is a contemporary flush mount fluorescent light fixture designed for various indoor applications such as kitchens or workshops. It features contoured white acrylic domes and curved trim, providing a pleasing halo effect. This fixture operates on a standard 120-volt HPF electric ballast and is designed for ceiling mount installation.

Figura 1: Frontal view of the Progress Lighting P7206-30EB fluorescent light fixture, showcasing its contoured white acrylic domes and textured white molding.

Informació de seguretat

ADVERTIMENT: To avoid electric shock, ensure power is turned off at the circuit breaker or fuse box before installation, maintenance, or bulb replacement. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unsure about proper installation.

• No instal·leu aquest aparell en llocs humits o secs.amp ubicacions.
• Ensure the fixture is securely mounted to a structural element of the ceiling.
• Utilitzeu només el tipus de bombeta i la potència especificatstage per evitar el sobreescalfament i els danys.
• Mantingueu els materials inflamables allunyats de la làmpada.

Contingut del paquet

Verify that all components are present before beginning installation. If any parts are missing or damaged, do not attempt to assemble or install the product. Contact Progress Lighting customer service for assistance.

• (1) P7206-30EB Fluorescent Light Fixture
• (1) Mounting Hardware Kit (screws, wire nuts, etc.)
• Bulbs (4x 32W F32T8) are NOT included and must be purchased separately.

Especificacions

Configuració i instal·lació

Important: Installation should be performed by a qualified electrician or a person with adequate knowledge of electrical wiring. Ensure power is disconnected at the main circuit breaker before proceeding.

1. Prepareu l'àrea d'instal·lació:
   • Turn off power at the main circuit breaker or fuse box to the outlet box where the fixture will be installed.
   • Assegureu-vos que la superfície de muntatge estigui neta, seca i estructuralment sòlida.
2. Muntar l'aparell:
   • Carefully remove the fixture from its packaging.
   • Align the fixture's mounting holes with the outlet box or pre-drilled holes in the ceiling. This fixture is designed to cover a standard outlet box.
   • Secure the fixture to the ceiling using the provided mounting screws. Ensure it is firmly attached and does not wobble.
3. Connexions elèctriques:
   • Connect the fixture's white wire to the white (neutral) wire from the outlet box using a wire nut.
   • Connect the fixture's black wire to the black (hot) wire from the outlet box using a wire nut.
   • Connect the fixture's ground wire (usually bare copper or green) to the house ground wire (usually bare copper or green) from the outlet box. If no house ground wire is present, connect to the green grounding screw on the mounting bracket.
   • Introduïu amb cura tots els cables a la caixa de sortida.
4. Install Bulbs and Diffuser:
   • Insert four (4) 32-watt F32T8 fluorescent bulbs into the lamp holders. Ensure they are seated correctly.
   • Carefully place the white acrylic diffuser onto the fixture, ensuring it is securely in place.
5. Restaura l'alimentació:
   • Torneu a connectar l'alimentació a l'interruptor o a la caixa de fusibles.
   • Test the fixture to ensure it operates correctly.

Figure 2: The P7206-30EB fixture installed in a kitchen setting, demonstrating its flush mount appearance and illumination.

Instruccions de funcionament

The Progress Lighting P7206-30EB fixture is designed for simple operation. Once properly installed and wired to a wall switch, it functions like any standard light fixture.

1. Activació/desactivació:
   • Flip the wall switch connected to the fixture to the "ON" position to illuminate the bulbs.
   • Flip the wall switch to the "OFF" position to turn off the light.

Manteniment

Un manteniment regular garanteix un rendiment òptim i una llarga durada de la teva làmpada.

• Neteja:
  • Abans de netejar, assegureu-vos que l'aparell estigui desconnectat a l'interruptor.
  • Wipe the exterior of the fixture and the acrylic diffuser with a soft, damp tela.
  • Do not use abrasive cleaners, solvents, or polishes as they may damage the finish or diffuser.
  • Allow the fixture to dry completely before restoring power.
• Substitució de bombetes:
  • Desconnecteu l'alimentació de l'aparell a l'interruptor.
  • Carefully remove the acrylic diffuser.
  • Allow old bulbs to cool before handling. Gently twist and remove the old F32T8 fluorescent bulbs.
  • Insert new 32-watt F32T8 fluorescent bulbs, ensuring they are properly seated in the lamp titulars.
  • Replace the acrylic diffuser.
  • Restaura l'alimentació i prova l'aparell.

Resolució de problemes

Si teniu problemes amb la vostra làmpada, consulteu els següents problemes i solucions habituals:

If the problem persists after attempting these solutions, contact a qualified electrician or Progress Lighting customer support.

Garantia i Suport

Garantia: The Progress Lighting P7206-30EB fixture comes with a Garantia limitada de 1 anys from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, or unauthorized repairs.

Atenció al client: For technical assistance, replacement parts, or warranty claims, please contact Progress Lighting customer service. Refer to the official Progress Lighting weblloc web per obtenir la informació de contacte més actualitzada.

Si us plau, conserveu el rebut de compra com a comprovant de compra a efectes de garantia.