1. Introducció
This manual provides detailed instructions for the proper use and maintenance of your LEXON NEO 8 Optical Watch, model LM88-O. Please read this manual thoroughly before using your watch to ensure optimal performance and longevity.
Figura 1: The LEXON NEO 8 Optical Watch, featuring a matte chrome casing and a black rubber strap with orange details.
2. Configuració
2.1 Instal·lació de la bateria
The LEXON NEO 8 Optical Watch requires one CR2016 battery for operation. If the display is blank or dim, the battery may need to be installed or replaced.
- Carefully remove the back cover of the watch using a small screwdriver.
- Inseriu una pila CR2016 amb el costat positiu (+) cap amunt.
- Replace the back cover, ensuring it is securely fastened to maintain water resistance.
2.2 Configuració inicial de l'hora
After battery installation, set the current time and date.
- Press and hold the 'MODE' button (usually located on the side) until the time display begins to flash.
- Use the 'ADJUST' button to change the flashing digits (hours, minutes, year, month, day).
- Press 'MODE' again to move to the next setting.
- Once all settings are correct, press 'MODE' one last time to exit the setting mode.
3. Instruccions de funcionament
3.1 Visualització bàsica de l'hora
In normal mode, the watch displays the current time. Pressing the 'LIGHT' button will illuminate the LCD display for better visibility in low light conditions.
Format 3.2 12/24 hores
Per canviar entre els formats d'hora de 12 hores (AM/PM) i de 24 hores (militar):
- In time setting mode (refer to Section 2.2), navigate to the hour setting.
- Press the 'ADJUST' button until the desired format appears (e.g., 'PM' for 12-hour or no indicator for 24-hour).
- Confirm by pressing the 'MODE' button.
3.3 Funció d'alarma
Per configurar i activar l'alarma:
- Press the 'MODE' button repeatedly until the alarm setting screen appears (often indicated by an alarm icon).
- Use the 'ADJUST' button to set the desired alarm time.
- Press 'MODE' to confirm the alarm time.
- To turn the alarm on or off, press the 'ADJUST' button while on the alarm setting screen. An alarm icon will typically appear on the main display when the alarm is active.
3.4 Day Display
The watch automatically displays the current day of the week. This is typically shown alongside the date. Ensure the date is set correctly for accurate day display.
3.5 Light Function (LCD)
Press the 'LIGHT' button (usually located on the top left or right side) to briefly illuminate the LCD display. This feature is useful for checking the time in dark environments.
4. Manteniment
4.1 Neteja
Per netejar el rellotge, netegeu-lo suaument amb un drap suau i sec. Per a la brutícia resistent, netegeu-lo lleugerament.amp cloth can be used, followed by immediate drying. Avoid using chemical cleaners or abrasive materials, as these can damage the watch's finish and components.
4.2 Substitució de la bateria
When the display becomes dim or the watch stops functioning, it is time to replace the CR2016 battery. Refer to Section 2.1 for battery installation instructions. It is recommended to have battery replacement performed by a qualified technician to ensure proper sealing and water resistance.
4.3 Atenció general
- Eviteu exposar el rellotge a temperatures extremes (calor o fred) o canvis sobtats de temperatura.
- Do not expose the watch to strong magnetic fields.
- While the watch may have some water resistance, avoid prolonged submersion or operating buttons underwater unless specifically stated otherwise for your model.
- Protect the watch from impacts and drops.
5. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La pantalla està en blanc o tènue. | Bateria baixa o esgotada. | Substituïu la pila CR2016 (vegeu la secció 2.1). |
| L'hora és incorrecta. | Time not set correctly or accidental reset. | Reinicieu la data i l'hora (vegeu la secció 2.2). |
| L'alarma no sona. | L'alarma no està activada o està configurada incorrectament. | Ensure the alarm is turned ON and the time is set correctly (refer to Section 3.3). |
| Els botons no responen. | Battery issue or internal malfunction. | Try replacing the battery. If the issue persists, contact customer support. |
6. Especificacions
- Número de model del fabricant: 2910215
- Mida: Approximately 4 cm (Length) x 3 cm (Width) x 1.2 cm (Thickness) (Based on 1.6 x 1.2 x 0.5 inches)
- Pes: 0.73 kg (1.7 lliures)
- Material: Matte chrome casing, black rubber strap
- País d'origen: Xina
- Funcions: Alarm, 12/24 hour display, Day display, LCD Light function
- Font d'alimentació: CR2016 x 1
7. Garantia i Suport
Specific warranty information for the LEXON NEO 8 Optical Watch, model LM88-O, is not provided in this manual. Please refer to the product packaging or the retailer's weblloc web per obtenir més informació sobre la cobertura de la garantia i la informació de contacte d'atenció al client.
