1. Introducció
The Zoo Med Repticare 100 Watt Ceramic Infrared Heat Emitter is designed to provide a consistent 24-hour heat source for all reptiles. This porcelain heating device screws into a standard porcelain incandescent socket, emitting intense, muscle-penetrating infrared heat without producing any visible light. Its flat-faced design enhances efficiency and longevity compared to conical designs, which can accumulate excess internal heat.
Característiques principals:
- Efficient Flat Face Design: More efficient and longer-lasting than traditional conical designs.
- Suitable for High Humidity Terrariums: Designed to perform reliably in humid environments.
- Significant Temperature Increase: Capaç d'incrementarasing terrarium air temperature by 10-20°F (5-11°C) above the surrounding room temperature.
Image: The Zoo Med Repticare 100 Watt Ceramic Infrared Heat Emitter in its retail packaging.
2. Advertiments de seguretat importants
Failure to follow these safety instructions may result in fire, electric shock, injury, or damage to the product or property.
- Seguretat elèctrica: Always disconnect power before installing, removing, or cleaning the emitter. Ensure the emitter is screwed into a standard porcelain incandescent socket (E26 base) rated for the wattage of the emitter. Do not use plastic sockets, as they can melt due to intense heat.
- Risc de cremades: The emitter surface becomes extremely hot during operation and remains hot for a significant period after being turned off. DO NOT TOUCH THE EMITTER WHEN IT IS ON OR RECENTLY TURNED OFF. Permetre ample time for cooling. Ensure pets cannot directly contact the emitter surface.
- Col·locació: Col·loca la lamp at a safe distance from your reptile to avoid overheating or burns. Use a protective wire-cage holder if necessary to prevent direct contact.
- Materials inflamables: Keep the emitter away from flammable materials such as paper, fabric, or bedding to prevent fire hazards.
- Exposició a l'aigua: Do not immerse the emitter in water or allow it to come into contact with water splashes, especially when hot, as this can cause cracking or electric shock.
- Control de temperatura: For precise temperature regulation and to prevent overheating or chilling, it is strongly recommended to use a thermostat with the heat emitter. Always monitor terrarium temperatures with a reliable thermometer.
- Danys: Do not strike or damage the emitter. A damaged emitter should be replaced immediately.
- Exempció de responsabilitat general: Do not solely rely on the information presented here. Always read labels, warnings, and directions provided with the product before use.
3. Instruccions de configuració
- Choose an Appropriate Fixture: Seleccioneu alamp fixture with a porcelain socket (E26 base) that is rated for at least 100 watts. Ensure the fixture is designed for reptile heating and can safely house the ceramic emitter.
- Assegureu el dispositiu: Muntar la lamp fixture securely above the terrarium, ensuring it is stable and cannot fall into the enclosure. Use a clamp lamp holder or a dome fixture designed for overhead heating.
- Install the Emitter: Carefully screw the Zoo Med Repticare 100 Watt Ceramic Infrared Heat Emitter into the porcelain socket of the fixture. Do not overtighten.
- Posicionament: Place the fixture at a height that provides the desired temperature gradient within the terrarium without allowing direct contact with the reptile. The ideal basking spot temperature for many reptiles is typically between 90-105°F (32-40°C), but this varies by species. Consult species-specific care sheets.
- Monitorització de la temperatura: Install a reliable thermometer directly under the heat emitter to monitor the basking spot temperature. Use additional thermometers to measure ambient temperatures in cooler areas of the terrarium.
- Optional Thermostat: For precise control and safety, connect the heat emitter to a compatible thermostat. This will regulate the emitter's output to maintain a stable temperature.
Imatge: Primer pla view of the ceramic heat emitter, showing its flat-faced design and screw base.
Image: The ceramic heat emitter being held, illustrating its size and form.
4. Instruccions de funcionament
The Zoo Med Repticare Ceramic Infrared Heat Emitter provides a constant source of infrared heat without emitting any light, making it ideal for 24-hour use without disrupting your reptile's natural day/night cycle.
- Encès: Once installed in a suitable fixture and positioned correctly, plug the fixture into a power outlet. If using a thermostat, ensure it is properly configured to your desired temperature settings.
- Escalfament inicial: Allow the emitter to operate for at least 30-60 minutes to reach its stable operating temperature and for the terrarium to warm up.
- Monitor de temperatures: Continuously monitor the basking spot and ambient temperatures using accurate thermometers. Adjust the height of the fixture or the thermostat settings as needed to achieve and maintain the appropriate temperature range for your reptile species.
- 24-Hour Heat: Since the emitter produces no visible light, it can be left on continuously to provide warmth during both day and night, ensuring a stable thermal environment for your pet.
- Apagar: To turn off the emitter, unplug the fixture from the power outlet or use the switch on your lamp fixture/thermostat.
5. Manteniment
- Neteja: Ensure the emitter is completely cool before attempting any cleaning. Wipe the ceramic surface with a dry, soft cloth to remove dust or debris. Do not use water or cleaning solutions directly on the emitter.
- Inspecció: Regularly inspect the emitter for any signs of damage, such as cracks, chips, or discoloration. Inspect the electrical cord and plug for fraying or damage.
- Substitució: Replace the emitter if it shows any signs of damage or if it ceases to function. While designed for long life, ceramic emitters can eventually fail.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Emitter not heating. | No power, faulty socket, or damaged emitter. | Check power connection. Test the socket with another bulb. Replace the emitter if damaged. |
| Terrarium too hot/cold. | Incorrect emitter wattage, improper placement, or thermostat malfunction. | Adjust emitter height. Verify wattage is appropriate for enclosure size. Check thermostat settings and function. |
| Rattling sound from emitter. | Internal component loose (rare, but reported). | Discontinue use and replace the emitter. |
7. Especificacions del producte
| Marca | Zoo Med |
| Nom del model | 976208 |
| Wattage | 100 watts |
| Voltage | 100-120 volts |
| Base del bulb | E26 |
| Material | Porcellana |
| Tipus de llum | Incandescent (Infrared Heat, No Visible Light) |
| Dimensions del producte | 4.2" d'amplada x 3.9" d'alçada (aprox. 10.7 cm d'amplada x 9.9 cm d'alçada) |
| Pes de l'article | 0.74 unces (aproximadament 21 grams) |
| Vida Mitjana | Up to 60 Months (approx. 25,000 hours) |
| Característica especial | Fet a Amèrica |
8. Garantia i Suport
Zoo Med products are manufactured to high standards. While specific warranty details are not always explicitly stated on packaging, some users have reported a 2-year warranty for similar ceramic heat emitters. For detailed warranty information, product support, or to report any issues, please contact Zoo Med Laboratories directly.
Fabricant: Zoo Med Laboratories
Weblloc: www.zoomed.com (Si us plau, consulteu la informació oficial) weblloc web per obtenir la informació de contacte i els recursos d'assistència més actualitzats.)
