Introducció
This manual provides comprehensive instructions for the proper use, installation, and maintenance of your Leupold Alumina Flip Back Lens Cover Kit. Designed for durability and protection, these lens covers ensure the longevity and performance of your riflescope's optics.
Producte acabatview
The Leupold Alumina Flip Back Lens Cover Kit is engineered to provide robust protection for your riflescope's eyepiece and objective lenses. Constructed from durable 6061-T6 aircraft-grade aluminum, these covers feature powerful neodymium magnets for secure closure and triple O-ring seals for maximum element protection. They are designed for quick and easy operation, flipping open to a low-profile posició.
Les característiques clau inclouen:
- Compatible with Leupold riflescopes manufactured after 2004, specifically those with 40mm objective lenses.
- Includes both eyepiece and objective covers.
- Features neodymium magnets for secure closure.
- Triple O-ring seals provide enhanced protection against dust and moisture.
- Precision-machined for smooth, low-profile funcionament.
- Round objective and ocular models can be rotated for preferred opening direction.
Image: The Leupold Alumina Flip Back Lens Cover Kit, showing both the objective and eyepiece covers in their closed positions. These covers are designed to protect the delicate lenses of your riflescope.
Configuració i instal·lació
The Alumina Flip Back Lens Covers are designed for straightforward installation on compatible Leupold riflescopes. Ensure your scope was built after 2004 and has a 40mm objective lens for proper fitment.
- Identify Covers: Distinguish between the objective lens cover (larger, for the front of the scope) and the eyepiece cover (smaller, for the rear of the scope).
- Thread onto Objective: Carefully align the threads of the objective lens cover with the threads on the front of your riflescope's objective bell. Gently rotate clockwise to screw the cover into place. Do not overtighten.
- Thread onto Eyepiece: Similarly, align the threads of the eyepiece cover with the threads on the rear of your riflescope's eyepiece. Screw it into place clockwise until snug.
- Ajusta l'orientació: The round objective and ocular models can be rotated after installation to allow them to open in any desired direction (e.g., upwards, downwards, or to the side) for optimal clearance and user preference.
Image: A Leupold Alumina Flip Back Lens Cover shown installed on the objective end of a riflescope, demonstrating its low-profile design when open.
Instruccions de funcionament
Operating the Alumina Flip Back Lens Covers is designed for speed and efficiency.
- Obrint les cobertes: To open, simply apply light pressure to the edge of the cover and flip it upwards or downwards, depending on its installed orientation. The covers are designed to snap open quickly and quietly.
- Closing the Covers: To close, gently push the cover back down until the internal neodymium magnets engage, securing it firmly in the closed position. Ensure a complete seal is made to protect against elements.
- Low-Profile Posició: When open, the covers are engineered to lie flat against the scope body, minimizing obstruction and preventing interference with your line of sight or other accessories.
Manteniment
Proper maintenance will ensure the longevity and optimal performance of your lens covers.
- Neteja: Wipe the exterior of the covers with a soft, clean cloth to remove dust and debris. For stubborn dirt, a slightly damp es pot fer servir un drap. Eviteu productes de neteja o dissolvents abrasius.
- Inspecció de la junta tòrica: Periodically inspect the triple O-rings for any signs of wear, cracking, or damage. Damaged O-rings can compromise the waterproof seal. If replacement is needed, contact Leupold customer support.
- Hinge Functionality: Ensure the hinge mechanism operates smoothly. If it becomes stiff, a small amount of silicone-based lubricant can be applied sparingly to the pivot points.
- Emmagatzematge: When not in use, store the lens covers in a clean, dry environment, ideally attached to the riflescope to prevent loss or damage.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Cover does not close securely. | Debris obstructing magnets or worn magnets. | Clean the magnet areas. If magnets are worn, contact Leupold for service. |
| Cover is difficult to open or close. | Dirt in hinge mechanism or lack of lubrication. | Clean the hinge area. Apply a small amount of silicone lubricant to the pivot points. |
| Water or dust ingress. | Juntes tòriques danyades o mal col·locades. | Inspect O-rings for damage. Ensure covers are fully threaded and snug. Contact Leupold for O-ring replacement if necessary. |
| Cover does not fit scope. | Incorrect scope model or objective size. | Verify your riflescope model and objective lens size. This kit is for post-2004 Leupold scopes with 40mm objective lenses. |
Especificacions
- Nom del model: Leupold Alumina Flip Back Lens Cover Kit - 40mm & Standard EP
- Número de peça: 62990
- Compatibilitat: Post-2004 Leupold Riflescopes with 40mm Objective Lenses
- Material: 6061-T6 Aircraft Grade Aluminum
- Color: Negre
- Pes: Approximately 3.2 Ounces (0.09 kg)
- Dimensions (Item LxWxH): Aproximadament 10 x 6 x 1 polzades (25.4 x 15.24 x 2.54 cm)
- Segellat: Triple O-ring seals
- Closure Mechanism: Imants de neodimi
Garantia i Suport
Leupold stands behind its products with a comprehensive warranty.
Informació de la garantia
This product is covered by Leupold's Full Lifetime Guarantee. This warranty ensures that your Leupold product will be free from defects in materials and workmanship for the life of the product. For detailed terms and conditions, please refer to the official Leupold weblloc o contacteu amb el servei d'atenció al client.
Atenció al client
For technical assistance, warranty claims, or any questions regarding your Leupold Alumina Flip Back Lens Cover Kit, please visit the official Leupold website or contact their customer support team. You can find contact information and FAQs on their weblloc:
