Intel DX58SO Extreme Series Desktop Board User Manual

1. Producte acabatview

The Intel DX58SO Desktop Board is a high-performance motherboard designed to harness the power of Intel Core i7-900 series processors. Based on the X58 chipset, it supports LGA1366 sockets and is optimized for demanding users, including PC enthusiasts and gamers. This board features advanced technologies such as Intel QuickPath Interconnect (QPI) and supports multi-GPU configurations with both ATI CrossFire and NVIDIA SLI technologies.

Característiques principals:

• Supports Intel Core i7 Processors (LGA1366 socket)
• ATI Crossfire and NVIDIA SLI Support for multi-GPU setups
• Support for up to 16 GB of DDR3 system memory (1600 MHz, 1333 MHz, and 1066 MHz)
• 7.1 Dolby Digital Audio subsystem (Realtek ALC889)
• 12 USB 2.0 ports (8 external, 2 internal headers)
• Six Serial ATA 3.0 Gbit/s ports, including two eSATA ports with RAID support
• Two IEEE-1394a ports
• Integrated Gigabit (10/100/1000 Mbps) Ethernet connection
• Intel Desktop Control Center for performance tuning and monitoring

Figura 1.1: Angle view of the Intel DX58SO Desktop Board, highlighting key components like the LGA1366 CPU socket, DDR3 memory slots, and various expansion ports.

Figura 1.2: De dalt a baix view of the Intel DX58SO Desktop Board, illustrating the overall layout of the board, including heatsinks, PCI Express slots, and SATA connectors.

2. Configuració i instal·lació

2.1. Abans de començar

• Assegureu-vos de tenir un entorn lliure d'electricitat estàtica. Feu servir una polsera antiestàtica o toqueu sovint un objecte metàl·lic connectat a terra.
• Gather all necessary components: Intel DX58SO motherboard, compatible Intel Core i7 processor (LGA1366), DDR3 memory modules, power supply, graphics card(s), storage devices, and a compatible ATX case.
• Refer to your case manual for specific mounting instructions.

2.2. Instal·lació de la placa base

1. Preparar el cas: Instal·leu la placa d'E/S a l'obertura posterior de la carcassa de l'ordinador.
2. Instal·leu separadors: Securely install the appropriate standoffs in your case that align with the screw holes on the motherboard.
3. Muntar la placa base: Carefully place the motherboard onto the standoffs, ensuring the I/O ports align with the I/O shield. Secure the motherboard with screws.
4. Instal·lació de la CPU: Open the CPU socket lever. Align the triangular mark on the Intel Core i7 processor with the mark on the LGA1366 socket. Gently place the CPU into the socket. Close the lever to secure the CPU.
5. Instal·leu el refrigerador de CPU: Apliqueu pasta tèrmica (si no n'heu aplicat prèviament) i instal·leu el refrigerador de la CPU segons les instruccions del fabricant. Connecteu el cable del ventilador de la CPU al connector CPU_FAN de la placa base.
6. Instal·lar memòria: Open the clips on the DDR3 DIMM slots. Align the notch on the memory module with the key in the slot. Press firmly on both ends of the module until the clips snap into place. For triple-channel operation, install modules in matching colored slots (e.g., blue slots).

2.3. Component Connections

• Connexions d'alimentació: Connect the 24-pin ATX main power connector and the 4-pin or 8-pin ATX 12V power connector from your power supply to the corresponding headers on the motherboard. Ensure both are securely seated to prevent damage.
• Targetes gràfiques: Insert your PCI Express graphics card(s) into the PCIe 2.0 x16 slots. For SLI or CrossFireX, install multiple cards as per their respective guidelines and connect the necessary bridge.
• Dispositius d'emmagatzematge: Connect your SATA hard drives and optical drives to the SATA 3.0 Gbit/s ports using SATA data cables. Connect power from your power supply to these devices.
• Connectors del panell frontal: Connect the power button, reset button, HDD LED, power LED, and front panel USB/audio headers from your case to the corresponding pins on the motherboard. Refer to the motherboard's silkscreen labels for correct orientation.
• Connexions perifèriques: Connect any additional USB devices, IEEE-1394a devices, or audio peripherals to the available ports.

3. Funcionament del sistema

3.1. Configuració de la BIOS

Upon first boot, you may need to enter the BIOS (Basic Input/Output System) to configure settings. Typically, you can access the BIOS by pressing the DEL or F2 key during startup. In the BIOS, you can set boot order, adjust system time, and configure various hardware parameters.

3.2. Intel Desktop Control Center

The Intel Desktop Control Center is a utility designed to help you optimize and monitor your system's performance. It allows for automatic tuning of processor, memory, and bus speeds for stability and performance. You can also monitor system temperatures, voltages, and fan speeds. Install this software from the Intel support website or the included driver disc for full functionality.

3.3. Multi-GPU Setup (SLI/CrossFireX)

To utilize the multi-GPU capabilities (NVIDIA SLI or ATI CrossFireX), ensure your graphics cards are properly installed and connected with the appropriate bridge. Install the latest drivers for your graphics cards from the manufacturer's website. The graphics driver software will typically provide options to enable and configure the multi-GPU mode.

4. Manteniment i cura

• Eliminació de pols: Regularly clean dust from inside your computer case, especially from heatsinks and fans, using compressed air. Dust accumulation can lead to overheating and reduced performance.
• Actualitzacions de la BIOS: Consulteu periòdicament el suport d'Intel website for BIOS updates. BIOS updates can improve system stability, add support for new hardware, or fix known issues. Follow Intel's instructions carefully when updating the BIOS.
• Actualitzacions de controladors: Keep your system drivers (chipset, audio, network, graphics) updated to ensure optimal performance and compatibility.
• Manipulació física: When handling the motherboard or other components, always use proper anti-static precautions to prevent electrostatic discharge (ESD) damage.

5. Solució De Problemes

Problemes comuns i solucions:

• Sense alimentació/Sense arrencada:
  • Ensure all power cables (24-pin ATX, 4/8-pin 12V CPU) are securely connected to the motherboard and power supply.
  • Verifiqueu que la font d'alimentació estigui connectada i funcioni correctament.
  • Comproveu la connexió del botó d'engegada del panell frontal a la placa base.
• Sense sortida de vídeo:
  • Ensure the graphics card is properly seated in its PCIe slot and has adequate power connected.
  • Verifiqueu que el cable del monitor estigui connectat correctament a la targeta gràfica i al monitor.
  • Test with a different monitor or graphics card if possible.
• Inestabilitat/Avaries del sistema:
  • Check CPU and memory temperatures using monitoring software. Ensure adequate cooling.
  • Verify memory modules are correctly installed and functioning. Run a memory diagnostic tool.
  • Assegureu-vos que tots els controladors estiguin actualitzats.
  • Si feu overclocking, torneu a la configuració predeterminada per comprovar l'estabilitat.
• Component Not Recognized (e.g., HDD, RAM):
  • Reseat the component.
  • Check data and power cable connections.
  • Verify BIOS settings for component detection.
• Restabliment de la BIOS: If system becomes unbootable due to incorrect BIOS settings, locate the CMOS clear jumper on the motherboard (refer to the motherboard diagram) or remove the CMOS battery for a few minutes to reset BIOS to default settings.

6. Especificacions tècniques

7. Garantia i Suport

Intel products are backed by a manufacturer's warranty. For specific warranty terms, duration, and conditions, please refer to the documentation included with your product or visit the official Intel support website. For technical assistance, driver downloads, and further troubleshooting resources, please visit Pàgina de suport oficial d'Intel.

When contacting support, please have your product model number (BOXDX58SO) and serial number ready.