Manual d'instruccions de l'aixeta del dispensador d'aigua freda InSinkErator F-C1100C

1. Introducció

Thank you for choosing the InSinkErator F-C1100C Cold Water Dispenser Faucet. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new faucet. The F-C1100C is designed to deliver cold drinking water directly at your kitchen sink when paired with a compatible InSinkErator cold water tank, such as the CWT-00 model. Its elegant chrome finish and high-arching spout complement various kitchen decors.

2. Informació de seguretat

Please read all instructions carefully before installing or using this product. Failure to follow these instructions may result in property damage or personal injury.

• Tanqueu sempre el subministrament principal d'aigua abans de començar qualsevol instal·lació o manteniment.
• Assegureu-vos que totes les connexions estiguin ben fixades i sense fuites abans de restablir el subministrament d'aigua.
• This faucet is designed for cold water dispensing only. Do not connect to a hot water supply.
• Professional installation is recommended if you are unfamiliar with plumbing procedures.
• Mantenir els nens allunyats de la zona d'instal·lació.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

• InSinkErator F-C1100C Cold Water Dispenser Faucet (Chrome)
• Mounting hardware (washers, nuts, etc.)
• Connection tubing/hoses
• Instruccions d'instal·lació (aquest manual)

Figura 1: InSinkErator F-C1100C Cold Water Dispenser Faucet. This image displays the InSinkErator F-C1100C cold water dispenser faucet. It features a high-arching spout and a single lever handle, all in a polished chrome finish. The design is transitional, suitable for various kitchen decors.

4. Especificacions

5. Instal·lació

This faucet requires a standard single-hole deck mount installation. It is designed to connect to a separate cold water tank (e.g., InSinkErator CWT-00) for chilled water delivery. Refer to the cold water tank's instruction manual for its specific installation requirements.

Eines i materials (no inclosos):

• Clau ajustable
• Tornavís de cap Phillips
• Basin clau anglesa (opcional, per a espais reduïts)
• Massilla de lampista o segellador de silicona
• Cinta de tefló
• Drill (if creating a new mounting hole)

Passos d'instal·lació:

1. Prepareu el forat de muntatge: Ensure a standard 1-3/8 inch (35mm) diameter hole is available on your sink or countertop. If drilling a new hole, follow the sink or countertop manufacturer's instructions.
2. Muntar l'aixeta:
   • Apply a thin bead of plumber's putty or silicone sealant around the base of the faucet.
   • Insert the faucet shank through the mounting hole.
   • From underneath the sink, slide the rubber washer, then the metal washer, and finally thread the mounting nut onto the faucet shank.
   • Hand-tighten the nut, then use a basin wrench or adjustable wrench to secure it firmly, ensuring the faucet is properly aligned. Do not overtighten.
3. Connecteu les línies d'aigua:
   • Connect the faucet's cold water inlet line to the outlet of your InSinkErator cold water tank (e.g., CWT-00). Refer to the tank's manual for specific connection points.
   • Use Teflon tape on threaded connections to ensure a watertight seal.
   • Ensure all connections are hand-tight, then tighten an additional 1/4 to 1/2 turn with a wrench.
4. Comproveu si hi ha fuites:
   • Enceneu lentament el subministrament d'aigua principal.
   • Inspect all connections for any signs of leaks. Tighten connections as necessary.
   • Allow water to run through the faucet for a few minutes to flush out any debris.

6. Funcionament

The InSinkErator F-C1100C faucet is designed for simple, hands-free operation to dispense cold water.

• Distribució d'aigua freda: Gently push the lever handle backward (away from the spout) to activate the cold water flow. The lever is designed to stay on, providing continuous flow without needing to hold it.
• Aturar el flux d'aigua: Push the lever handle forward (towards the spout) to stop the water flow.
• Giratori del bec: The high-arching spout can swivel for greater convenience, allowing you to direct the water flow as needed.

7. Manteniment

Proper care and maintenance will ensure the longevity and appearance of your InSinkErator F-C1100C faucet.

• Neteja de l'acabat: Netegeu l'acabat cromat regularment amb un drap suau iamp cloth and mild soap. Rinse thoroughly and dry with a soft cloth to prevent water spots.
• Eviteu els netejadors durs: Do not use abrasive cleaners, scouring pads, ammonia-based cleaners, or cleaners containing bleach, acids, or alcohol, as these can damage the finish.
• Manteniment de l'airejador: Si el flux d'aigua es restringeix, l'airejador de la punta del broc pot estar obstruït. Desenrosqueu l'airejador, netegeu les restes i esbandiu-lo abans de tornar-lo a fixar.
• Inspecció periòdica: Periodically check all connections under the sink for any signs of leaks or corrosion.

8. Solució De Problemes

If you encounter issues with your F-C1100C faucet, refer to the following common problems and solutions:

9. Garantia i Suport

For detailed warranty information, please refer to the documentation included with your product or visit the official InSinkErator website. If you require technical assistance or replacement parts, please contact InSinkErator customer support.

Podeu trobar més informació i recursos de suport visitant la Botiga InSinkErator a Amazon.