Introducció
The Cat Mate 3-Level Pet Fountain is designed to provide your pets with a continuous supply of fresh, filtered water. Its multi-level design caters to various pet sizes and preferences, encouraging hydration which is vital for their health. This fountain features a 3-stage filtration system and a low-voltage pump for quiet and efficient operation. Made from BPA and BHT-free materials, it ensures a safe drinking experience for your beloved companions.
Informació important de seguretat
- Només per a ús domèstic interior.
- Always unplug the fountain from the power outlet before cleaning or performing any maintenance.
- Do not allow the pump to run dry; ensure the water level is always above the minimum mark.
- Mantingueu el cable d'alimentació allunyat de les mascotes que masteguen.
- No submergiu l'adaptador d'alimentació a l'aigua.
- Regularly inspect the fountain and power cord for any damage. Discontinue use if damaged.
Llista de peces
Before assembly, ensure all parts are present and undamaged:
- Fountain Base (Lower Bowl)
- Upper Fountain Unit (with multiple drinking levels)
- Volum baixtage Bomba
- 3-Stage Filter Cartridge
- Adaptador d'alimentació
- Raspall de neteja
Instruccions de configuració
- Netegeu totes les peces: Thoroughly wash all fountain components (base, upper unit, pump, filter housing) with warm, soapy water before first use. Rinse well.
Figure 1: Assembled Cat Mate Pet Fountain.
- Prepareu el filtre: Rinse the 3-stage filter cartridge under cool running water for 30 seconds to remove any loose carbon dust. This is a crucial step for optimal filtration.
Figure 2: Dual action filter, capturing pet hair and dirt, and removing chlorine.
- Install the Filter and Pump: Place the rinsed filter cartridge into its designated slot in the fountain base. Ensure the pump is securely attached to the bottom of the upper fountain unit, and the power cord is routed through the designated channel.
Figura 3: Intern view showing the pump and filter installation.
- Muntar la font: Carefully place the upper fountain unit onto the base, ensuring it sits firmly and the pump's outlet aligns with the water flow channel.
- Omplir amb aigua: Fill the fountain with fresh water up to the MAX fill line indicated on the side of the base. Do not overfill. Ensure the water level is always above the minimum mark to prevent pump damage.
Figura 4: lateral view of the fountain, highlighting the water level indicators.
- Connectar l'alimentació: Connect the power adapter to the fountain's power cord, then plug the adapter into a standard electrical outlet. The fountain should begin operating immediately.
Instruccions de funcionament
Once assembled and plugged in, the Cat Mate Pet Fountain will continuously circulate water, providing fresh hydration for your pets. The multi-level design offers various drinking options:
- Upper Level: Ideal for cats who prefer to drink from a higher position or from flowing water.
- Lower Reservoir: Appealing to pets who prefer to drink from a wider, more open surface, allowing for comfortable whisker clearance.
Figure 5: Multi-tier design provides various drinking options for pets.
Monitor the water level daily and refill as needed to ensure continuous operation and prevent pump damage. The fountain is designed for quiet operation, but a slight trickling sound may be audible, which can encourage pets to drink.
Figure 6: A cat comfortably drinking from the fountain.
Figure 7: The fountain is also suitable for small dogs.
Manteniment
Manteniment diari:
- Comproveu el nivell de l'aigua i torneu-ho a omplir si cal.
- Remove any visible debris (pet hair, food particles) from the water.
Neteja setmanal:
- Unplug the fountain from the power outlet.
- Disassemble all components: base, upper unit, pump, and filter.
- Wash the fountain base and upper unit. These parts are dishwasher safe (top rack recommended). For hand washing, use warm, soapy water and rinse thoroughly.
- Clean the pump: Disassemble the pump by removing the cover and impeller. Use the provided cleaning brush to remove any debris, hair, or mineral buildup from the impeller and inside the pump housing. Rinse all pump parts thoroughly.
- Reassemble the pump and fountain.
Substitució del filtre:
Els 3-stage filter cartridge should be replaced approximately every 4 weeks, or more frequently if you have multiple pets or notice reduced water flow. Replacement filters are available separately.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La font no funciona / No hi ha flux d'aigua |
|
|
| La font fa soroll |
|
|
| Water tastes bad / Odor |
|
|
Especificacions
- Marca: Gat company
- Model: 335
- Capacitat: 70 fl. oz. (approximately 2.07 liters)
- Material: BPA and BHT Free Plastic
- Dimensions: 10.5 cm de llargada x 6.75 cm d'amplada x 8.75 cm d'alçada
- Pes de l'article: 1 lliures
- Filtració: 3-Stage Filtre
- Bomba: Volum baixtage, Energy-Efficient
- Apte per a rentavaixelles: Bowls (top rack)
Garantia i Suport
Per obtenir informació sobre la garantia o assistència tècnica, consulteu el lloc web oficial del fabricant. weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el rebut de compra com a comprovant de compra.
Fabricant: Ani Mate Inc
