KERBL Fence Check with LED Display User Manual

Introducció

This user manual provides comprehensive instructions for the KERBL Fence Check with LED Display, Model 44669. It covers product overview, setup, operation, maintenance, and troubleshooting. Please read this manual thoroughly before using the device to ensure safe and effective operation.

The KERBL Fence Check is designed for convenient, non-contact measurement of electric fence voltage. It features an LED display for clear voltage indication and a battery status indicator.

Informació de seguretat

• Always handle electrical testing equipment with care.
• No intenteu obrir ni modificar el dispositiu. No hi ha peces a l'interior que l'usuari pugui reparar.
• Keep the device dry. Exposure to moisture can damage the electronics and pose a safety risk.
• Guardeu el dispositiu fora de l'abast dels nens.
• Ensure the battery is correctly installed before use.
• This device is for testing electric fence voltage only. Do not use it for other purposes.

Producte acabatview

The KERBL Fence Check is a compact, handheld device designed for quick and easy electric fence voltage testing. It operates wirelessly, eliminating the need for a ground spike.

Figura 1: Frontal view of the KERBL Fence Check device, highlighting the LED voltage indicators, low kV warning, battery status light, and the 'PUSH' button.

Components:

• Voltage Indicator LEDs: Four green LEDs indicating voltage levels (2.5 kV, 4.0 kV, 6.0 kV, 8.0 kV).
• Low kV LED: A red LED indicating low voltage.
• LED d'estat de la bateria: An LED indicating the battery charge level.
• Polsador: Activates the measurement function.
• Compartiment de la bateria: Located on the back (not visible in Figure 1).

Configuració

Instal·lació de la bateria:

1. Localitzeu la tapa del compartiment de la bateria a la part posterior del dispositiu.
2. Carefully slide or unclip the cover to open it.
3. Insert one 9-volt block battery, ensuring correct polarity (+ and -). The device comes with a 9-volt block battery included.
4. Col·loqueu la coberta del compartiment de la bateria amb seguretat.
5. After battery installation, the battery status LED should briefly illuminate, indicating sufficient power. If it does not, check battery orientation or replace the battery.

Instruccions de funcionament

The KERBL Fence Check allows for quick and easy voltage measurement without direct contact or a ground spike.

Realització d'una mesura:

1. Agafeu el dispositiu fermament a la mà.
2. Approach the electric fence wire or tape. The measurement is carried out at a distance of maximum 0 - 5 cm from the fence.
3. Press and hold the 'PUSH' button on the front of the device.

Figure 2: A hand pressing the 'PUSH' button to activate the measurement.
4. Observe the LED indicators. The voltage is displayed by four bright green diodes in four levels: 2500 volts, 4000 volts, 6000 volts, and 8000 volts.
5. Si el voltage is low, a red LED will illuminate, indicating a potential issue with the fence's power.
6. Release the 'PUSH' button once the reading is taken.

Figure 3: Proper usage of the device, held close to the electric fence for measurement.

Comprensió de la pantalla:

• Green LEDs (2.5 kV, 4.0 kV, 6.0 kV, 8.0 kV): Each illuminated green LED indicates that the fence voltage has reached or exceeded that specific level. For example, if the 6.0 kV LED is lit, the voltage is at least 6000 volts.
• Red LED (Low kV): If this LED illuminates, the fence voltage is below the optimal operating range, indicating a need for inspection or repair of the fence system.
• LED d'estat de la bateria: This LED indicates the remaining battery life. If it flashes or remains off during operation, the battery may need replacement.

Figure 4: The diagram on the left shows an incorrect method of testing with a ground spike, while the diagram on the right illustrates the correct non-contact method without a ground spike, as intended for this device.

Manteniment

• Neteja: Netegeu el dispositiu amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
• Substitució de la bateria: Replace the 9-volt battery when the battery status LED indicates low power or when the device fails to power on. Refer to the "Battery Installation" section for instructions.
• Emmagatzematge: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for extended periods, remove the battery to prevent leakage.

Resolució de problemes

Especificacions

• Número de model: 44669
• Marca: KERBL
• Voltage Visualització: 4 levels (2.5 kV, 4.0 kV, 6.0 kV, 8.0 kV) via green LEDs
• Volum baixtage Indicador: LED vermell
• Distància de mesura: Max. 0 - 5 cm from fence
• Font d'alimentació: 1 x 9-volt block battery (included)
• Dimensions: Aproximadament 6.85 x 3.19 x 1.14 polzades
• Pes: Aproximadament 3.53 unces
• Fabricant: Kerbl

Garantia i Suport

KERBL products are manufactured to high-quality standards. For information regarding warranty coverage and terms, please refer to the warranty card included with your product or visit the official KERBL weblloc web. Conserveu el rebut de compra com a comprovant de compra.

For technical support or inquiries not covered in this manual, please contact KERBL customer service through their official channels. Contact details can typically be found on the product packaging or the manufacturer's weblloc.