1. Introducció
This manual provides essential information for the safe and efficient use of the WAGO 750-601 Fuse Holder. The WAGO 750-601 is a 24 VDC fuse holder designed for DIN 35 rail mounting, featuring an IP20 protection rating and a light gray finish. It functions as a power supply component within industrial electrical systems, specifically categorized under PLCs/Machine Control and VDC Logic I/O Modules.
2. Informació de seguretat
Always adhere to local and national electrical codes and regulations. Installation, operation, and maintenance should only be performed by qualified personnel. Failure to follow these instructions may result in injury or damage to the device.
- Desconnecteu l'alimentació: Assegureu-vos que tota l'alimentació estigui desconnectada abans de la instal·lació, el cablejat o el manteniment.
- Fusió correcta: Use only fuses of the specified type and rating.
- Condicions ambientals: Do not expose the device to conditions outside its specified operating temperature or IP rating.
- Posada a terra: Assegureu-vos d'una connexió a terra adequada si escau.
- Aïllament: Verify proper insulation of all connections.
3. Producte acabatview
The WAGO 750-601 is a compact and robust fuse holder module designed for industrial control applications. Its key features include:
- Volum nominal de 24 VDCtage.
- Designed for DIN 35 rail mounting, ensuring easy integration into control cabinets.
- Functions as a dedicated fuse holder for circuit protection.
- IP20 protection rating, suitable for indoor industrial environments.
- Light gray housing for standard industrial aesthetics.
Figura 1: Part frontal view of the WAGO 750-601 Fuse Holder, showing terminal connections and fuse slot.
Figura 2: lateral view of the WAGO 750-601 Fuse Holder, illustrating its compact profile for DIN rail mounting.
4. Configuració
4.1 Muntatge en carril DIN
- Ensure the DIN rail (35 mm) is securely mounted within the control cabinet.
- Align the WAGO 750-601 module with the DIN rail.
- Press the module firmly onto the DIN rail until it clicks into place, indicating a secure attachment.
4.2 Connexions de cablejat
- Entrada d'alimentació: Connect the 24 VDC power supply to the designated input terminals. Observe polarity (+/-).
- Sortida de càrrega: Connect the protected circuit's input to the designated output terminals.
- Instal·lació de fusibles: Insert the appropriate fuse (e.g., T 0.3 A, 240 V as indicated on some variants) into the fuse holder slot. Ensure the fuse is correctly seated.
- Verify all connections are tight and secure to prevent loose contacts.
5. Instruccions de funcionament
The WAGO 750-601 Fuse Holder operates passively by providing overcurrent protection to the connected circuit. Once installed and wired, it continuously monitors the current flow. If the current exceeds the fuse's rated value, the fuse will blow, interrupting the circuit and protecting downstream components.
- Funcionament normal: With a healthy fuse and proper power supply, the module allows current to pass through to the protected circuit.
- Fuse Blown Indication: Some fuse types or external indicators may provide visual feedback when a fuse has blown. Always verify circuit continuity if a fault is suspected.
6. Manteniment
Regular maintenance ensures the longevity and reliable operation of the WAGO 750-601 Fuse Holder.
- Inspecció periòdica: Visually inspect the module and its connections periodically for any signs of damage, corrosion, or loose wiring.
- Substitució de fusibles: If a fuse blows, always disconnect power before replacing it. Replace with a fuse of the exact same type and rating as specified for the application.
- Neteja: Keep the module clean and free from dust and debris. Use a dry, lint-free cloth for cleaning. Do not use abrasive cleaners or solvents.
- Control ambiental: Assegureu-vos que l'entorn de funcionament es mantingui dins dels rangs de temperatura i humitat especificats.
7. Solució De Problemes
This section provides guidance for common issues encountered with the WAGO 750-601 Fuse Holder.
| Problema | Causa possible | Solució |
|---|---|---|
| No power to protected circuit | Fusible cremat | Disconnect power, replace fuse with correct type and rating. Investigate cause of overcurrent. |
| Module not securely mounted | Incorrect DIN rail installation | Ensure module is pressed firmly onto the DIN rail until it clicks. Check DIN rail integrity. |
| Connexió intermitent | Connexions de cablejat soltes | Disconnect power, re-tighten all terminal connections. |
| Module appears damaged | Physical impact or electrical surge | Disconnect power immediately. Replace the module if physical damage is evident. Consult a qualified technician. |
8. Especificacions
Key technical specifications for the WAGO 750-601 Fuse Holder:
| Especificació | Valor |
|---|---|
| Número de model | 750-601 |
| Volum nominaltage | 24 VDC |
| Tipus de muntatge | DIN 35 Rail Mounting |
| Funció | Porta-fusibles |
| Classificació de protecció | IP20 |
| Color | Gris clar |
| Categoria | PLCs/Machine Control, VDC Logic I/O Module |
| Fabricant | WAGO |
| Primera data disponible | 7 d'agost de 2012 |
9. Garantia i Suport
For specific warranty information regarding your WAGO 750-601 Fuse Holder, please refer to the documentation provided at the time of purchase or contact WAGO directly. WAGO products are designed for high reliability and performance in industrial environments.
For technical support, product inquiries, or service, please visit the official WAGO weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. També podeu trobar més informació i productes a WAGO Store on Amazon.
