SEM 70007 Plastic Repair Tape Instruction Manual

1. Producte acabatview

The SEM 70007 Plastic Repair Tape is a specialized film-backed reinforcing tape designed for automotive and general repair applications. It is primarily used to strengthen repairs on plastic and fiberglass components and is also effective for creating or repairing bumper tabs. This tape provides a robust backing for various fillers, ensuring durable and long-lasting repairs.

Image 1.1: A roll of SEM 70007 Plastic Repair Tape alongside a standing roll, illustrating its texture and form factor.

2. Especificacions

• Marca: SEM
• Model: 70007
• Material: Plastic (film-backed reinforcing tape)
• Dimensions: 4.75 inches (width) x 15 feet (length)
• Usos recomanats: Strengthening plastic and fiberglass repairs, creating and repairing bumper tabs.
• Materials compatibles: Plàstic, fibra de vidre
• Nivell de resistència a l'aigua: No resistent a l'aigua

3. Configuració i preparació

Proper preparation is crucial for effective adhesion and repair strength.

1. Neteja de superfícies: Ensure the repair area on the plastic or fiberglass component is thoroughly cleaned. Remove all dirt, grease, oil, wax, and other contaminants using an appropriate automotive-grade cleaner or degreaser.
2. Assecat: Allow the surface to dry completely before proceeding. Any moisture can compromise adhesion.
3. Sanding (Optional but Recommended): For optimal adhesion, lightly sand the repair area with fine-grit sandpaper (e.g., 180-220 grit) to create a mechanical bond. Clean off any sanding dust.
4. Eines: Have a pair of sharp scissors or a utility knife ready for cutting the tape.

4. Instruccions de funcionament

Follow these steps for effective application of SEM 70007 Plastic Repair Tape:

4.1. For Strengthening Plastic and Fiberglass Repairs

1. Cut Tape to Size: Measure and cut a piece of SEM 70007 tape slightly larger than the repair area. For larger repairs, multiple pieces may be used.
2. Aplicar cinta: Carefully apply the tape over the prepared repair area. Ensure it lies flat and smooth, pressing firmly to eliminate air bubbles and ensure full contact with the surface.
3. Overlap (if necessary): If using multiple pieces, overlap them slightly to maintain continuous reinforcement.
4. Apply Filler: Once the tape is securely in place, apply your chosen plastic or fiberglass filler directly over the tape according to the filler manufacturer's instructions. The tape acts as a strong backing, preventing the filler from pushing through and providing structural integrity.

4.2. For Creating or Repairing Bumper Tabs

1. Shape the Tape: Cut the tape to the desired shape and size for the bumper tab. For creating new tabs, you may need to layer the tape to build thickness.
2. Adhere to Bumper: Apply the shaped tape to the designated area on the bumper, ensuring strong adhesion.
3. Reinforce with Filler: Apply a suitable plastic repair filler over the tape, shaping it to form the new or repaired bumper tab. Allow it to cure completely.
4. Acabats: Once cured, the tab can be sanded, primed, and painted as required.

5. Manteniment

To ensure the longevity and effectiveness of your SEM 70007 Plastic Repair Tape:

• Emmagatzematge: Guardeu la cinta en el seu embalatge original en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
• Mantenir net: Prevent dust and debris from accumulating on the tape's adhesive surface when not in use.

6. Solució De Problemes

If you encounter issues during application, consider the following:

• Mala adherència:
  • Ensure the surface was thoroughly cleaned and free of contaminants (grease, oil, dust).
  • Verify the surface was completely dry before application.
  • Consider lightly sanding the surface to improve mechanical grip.
• Tape Not Lying Flat/Bubbles:
  • Apply the tape slowly and press firmly from the center outwards to smooth out any air bubbles.
  • Ensure the surface is relatively flat or that the tape is cut to conform to contours.
• Repair Lacks Strength:
  • Ensure sufficient layers of tape were used for the repair's requirements.
  • Verify that the chosen filler is compatible with plastic/fiberglass and applied correctly over the tape.

7. Garantia i Suport

For specific warranty information or technical support regarding the SEM 70007 Plastic Repair Tape, please contact SEM directly through their official website or customer service channels. Keep your purchase receipt for any warranty claims.