RIDGID 72937 VT2503 Car Nozzle Instruction Manual

Introducció

Thank you for choosing the RIDGID 72937 VT2503 Car Nozzle. This accessory is designed to enhance the cleaning capabilities of your compatible RIDGID wet/dry vacuum, specifically for detailed cleaning of vehicle interiors. Please read these instructions carefully before use to ensure proper operation and maintenance.

Producte acabatview

The RIDGID 72937 VT2503 Car Nozzle is a specialized attachment for wet/dry vacuums, engineered for effective cleaning in confined spaces and on various surfaces within vehicles.

Image: The RIDGID 72937 VT2503 Car Nozzle, a black, elongated nozzle with an angled tip, designed for reaching into tight spaces.

Característiques principals:

• Designed for detailed cleaning of upholstery and carpet.
• Ideal for cleaning cars, vans, and SUVs.
• Compatible with most RIDGID wet/dry vacuums.

Configuració

Follow these steps to properly attach the car nozzle to your wet/dry vacuum:

1. Ensure Vacuum is Off: Before attaching or detaching any accessories, always ensure your wet/dry vacuum is unplugged from the power source to prevent accidental startup.
2. Identify Vacuum Hose: Locate the end of your RIDGID wet/dry vacuum hose.
3. Col·loca el broquet: Firmly push the base of the VT2503 Car Nozzle onto the end of the vacuum hose or extension wand. Ensure it creates a snug, airtight fit for optimal suction.
4. Verificar la compatibilitat: This nozzle is designed to fit most RIDGID wet/dry vacuums. If the fit is loose or does not attach securely, verify your vacuum model's compatibility with RIDGID accessories.

Instruccions de funcionament

Once the car nozzle is securely attached, you can begin cleaning:

1. Encès: Plug in your wet/dry vacuum and turn it on.
2. Neteja específica: Use the narrow, angled tip of the nozzle to reach into tight spaces, crevices, and corners of your vehicle's interior, such as between seats, under pedals, and along console edges.
3. Neteja de superfícies: The nozzle is effective for cleaning upholstery and carpet. Move the nozzle slowly over surfaces to allow the vacuum to pick up dirt, dust, and debris.
4. Només ús en sec: This nozzle is intended for dry vacuuming applications within vehicle interiors. Avoid using it for wet pickup unless specifically instructed by your vacuum's manual for accessories.

Manteniment

To ensure the longevity and effective performance of your car nozzle:

• Neteja: After each use, inspect the nozzle for any trapped debris. Remove any lint, hair, or larger particles that may be obstructing the airflow. You can rinse the nozzle with water if necessary, ensuring it is completely dry before reattaching it to the vacuum.
• Emmagatzematge: Store the nozzle in a clean, dry place away from direct sunlight and extreme temperatures.
• Inspecció: Periodically check the nozzle for cracks, damage, or excessive wear. Replace if damaged to maintain optimal suction and prevent potential issues.

Resolució de problemes

If you encounter issues with your RIDGID 72937 VT2503 Car Nozzle, consider the following:

• Mala succió:
  • Ensure the nozzle is securely attached to the vacuum hose or wand, creating an airtight seal.
  • Check the nozzle opening for any blockages and clear them.
  • Verify that your vacuum's filter is clean and the collection drum is not full.
• Nozzle Does Not Fit:
  • This nozzle is designed for most RIDGID wet/dry vacuums. If it does not fit your specific model, it may not be compatible. Refer to your vacuum's manual or RIDGID's accessory compatibility guide.
  • Ensure you are attempting to attach it to the correct diameter hose or wand.

Especificacions

Garantia i Suport

This RIDGID accessory is manufactured to high-quality standards. For information regarding warranty coverage or technical support, please refer to the documentation provided with your RIDGID wet/dry vacuum or visit the official RIDGID website. You may also contact RIDGID customer service directly for assistance with this accessory.

RIDGID Official Weblloc: www.ridgid.com