MONACO 12.0620

MONACOR LP-200-8 Level Control

Model: 12.0620

Introducció

The MONACOR LP-200-8 is a passive stereo level control designed for integration with loudspeaker systems. It allows for precise attenuation of audio signals, ensuring optimal listening levels and system balance. This unit features a durable flat front panel and an intuitive rotary knob for user-friendly operation.

Producte acabatview

MONACOR LP-200-8 Level Control with front panel and knob

Davant view of the MONACOR LP-200-8 Level Control, showing the black square front panel with 'AUDIO LEVEL' and 'MIN.' markings, and the central black control knob.

Característiques principals:

  • Stereo level control for loudspeakers.
  • Includes a flat front panel and rotary knob for easy integration and adjustment.
  • Designed for 8 Ohm impedance systems.
  • Capable of handling peak power up to 15W.
  • Attenuation adjustable from 0dB to full attenuation.

Configuració i instal·lació

The LP-200-8 is designed for panel mounting and integration into existing audio systems. Ensure all power to the amplifier and speakers is disconnected before proceeding with installation.

Instruccions de cablejat:

  1. Identificar connexions: The level control has input and output terminals for left and right stereo channels. Refer to the wiring diagram provided with your specific audio setup for correct terminal identification.
  2. Connecta't AmpSortida de lifier: Connect the speaker output terminals from your amplifier to the input terminals of the LP-200-8 level control. Ensure correct polarity (+ to + and - to -) for both left and right channels.
  3. Connect Speaker Input: Connect the output terminals of the LP-200-8 level control to your 8 Ohm loudspeakers. Again, observe correct polarity for both channels.
  4. Muntatge: Secure the level control to a suitable panel or enclosure using appropriate fasteners. Ensure the knob can rotate freely without obstruction.

Important: This unit is designed for 8 Ohm impedance. Using it with speakers of different impedance may affect performance or cause damage to the unit or connected equipment. Do not exceed the maximum peak power rating of 15W.

Instruccions de funcionament

Once installed, the MONACOR LP-200-8 provides simple and effective audio level adjustment.

Manteniment

The MONACOR LP-200-8 Level Control requires minimal maintenance. Follow these guidelines to ensure longevity:

Resolució de problemes

If you experience issues with your LP-200-8 Level Control, consider the following common troubleshooting steps:

If problems persist after attempting these steps, consult a qualified audio technician.

Especificacions

Número de model:12.0620
Marca:MONACOR
Tipus:Stereo Level Control for Loudspeakers
Impedància:8 ohms ± 25%
Tractament de potència màxima:15 W MÀX
Attenuation Direction:Counter-clockwise (decrease level)
Turning Angle:300° ± 5°
Rang d'atenuació:0dB to full attenuation
Canals:estèreo
Dimensions del paquet:9.4 x 5.8 x 5 cm
Pes de l'article:9.07 grams
País de producció:Taiwan
Tipus de muntatge:Suport al tauler

Garantia i Suport

For information regarding warranty coverage, technical support, or service, please refer to the official MONACOR weblloc web o poseu-vos en contacte amb el vostre distribuïdor autoritzat. Conserveu el rebut de compra com a comprovant de compra.

Recursos en línia: www.monacor.com

Documents relacionats - 12.0620

Preview Atenuador estèreo MONACOR ATT-325ST: guia tècnica i d'instal·lació
Aquest document proporciona instruccions d'instal·lació, detalls d'aplicació, notes de seguretat i especificacions tècniques per a l'atenuador estèreo MONACOR ATT-325ST. Dissenyat per a sistemes d'àudio professionals, ofereix una potència de 25 W RMS per canal i compatibilitat amb una impedància de 4 Ω.
Preview Adaptació estèreo MONACOR SLA-35 AmpManual d'usuari més viu
Manual d'usuari per a l'adaptació estèreo MONACOR SLA-35 Amplificador, que detalla les seves aplicacions, funcionament, instruccions de seguretat i especificacions tècniques per al nivell d'àudio i l'adaptació d'impedància.
Preview Atenuadors PA de la sèrie MONACOR ATT: especificacions tècniques i guia d'instal·lació
Especificacions tècniques detallades, instruccions de seguretat i guia de connexió per als atenuadors PA de la sèrie ATT de MONACOR (ATT-506PEU, ATT-512PEU, ATT-524PEU, ATT-5100PEU) utilitzats en sistemes PA de 100 V.
Preview MONACOR SL-250 SW/EN & SL-250 WS/EN PA Speaker Installation and Usage Guide
Comprehensive guide for installing and using the MONACOR SL-250 SW/EN and SL-250 WS/EN PA speakers, covering applications, safety instructions, installation steps, and technical specifications. Certified for EN 54-24 voice alarm systems.
Preview Manual d'instal·lació i funcionament dels altaveus PA MONACOR SL-250 SW/EN i SL-250 WS/EN
Aquest manual proporciona instruccions detallades per a la instal·lació i el funcionament dels altaveus PA MONACOR SL-250 SW/EN i SL-250 WS/EN. Cobreix aplicacions, pautes d'ús importants, procediments d'instal·lació pas a pas i especificacions tècniques completes, garantint una implementació segura i eficaç en sistemes de PA i alarmes de veu.
Preview Excitadors d'àudio MONACOR AR-30 i AR-50: instal·lació i especificacions
Aquesta guia proporciona instruccions detallades per instal·lar i utilitzar els excitadors d'àudio MONACOR AR-30 i AR-50. Aprèn sobre les seves característiques, especificacions tècniques i com transformar superfícies en altaveus per a una experiència d'àudio única.