Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of the Altronix NetWay PoE Injector Hub, model NETWAY16. This device is designed to provide Power over Ethernet (PoE) to compatible network devices, simplifying power and data infrastructure.
Informació de seguretat
- Llegiu totes les instruccions abans d'utilitzar el dispositiu.
- No exposeu la unitat a la pluja o la humitat.
- Assegureu-vos de posar a terra correctament per evitar descàrregues elèctriques.
- Utilitzeu només accessoris/accessoris especificats pel fabricant.
- Demaneu tot el servei a personal de servei qualificat.
- Desconnecteu l'alimentació abans de netejar-la o reparar-la.
Configuració
1. Desembalatge
Carefully remove the NetWay16 unit from its packaging. Verify that all components are present and undamaged. Retain the packaging for future transport or storage.
2. Muntatge
The Altronix NetWay16 is designed for rack mounting. It occupies 1U of rack space. Secure the unit to a standard 19-inch equipment rack using appropriate rack screws (not included).
Figura 1: Frontal view of the Altronix NetWay16 PoE Injector Hub, showing 16 RJ45 ports with indicator lights and the Altronix logo. The unit is designed for rack mounting.
3. Connexions
- Network Input: Connect your network switch or router to the designated RJ45 input port on the NetWay16.
- Sortida PoE: Connect your PoE-enabled devices (e.g., IP cameras, VoIP phones, wireless access points) to the 16 RJ45 output ports. Each port provides up to 15.4W of power, compliant with IEEE 802.3af.
- Connexió d'alimentació: Connect the appropriate power supply (not included, refer to product specifications for requirements) to the power input terminal. Ensure the power source matches the unit's voltage requisits.
4. Engegada inicial
Once all connections are secure, apply power to the unit. Observe the indicator lights on the front panel. A steady green light typically indicates proper power and PoE status for each port. Refer to the "Operating" section for indicator light interpretation.
En funcionament
The Altronix NetWay16 operates automatically once powered on and connected. It provides Power over Ethernet to connected devices without requiring manual configuration for basic operation.
Funcionalitat PoE
Each of the 16 ports on the NetWay16 is compliant with IEEE 802.3af, delivering up to 15.4 watts of power. The unit automatically detects PoE-compatible devices and supplies power accordingly. Non-PoE devices connected to the output ports will still receive data connectivity but will not be powered by the unit.
Llums indicadores
The front panel features indicator lights for each port. These lights provide visual feedback on the status of the PoE connection:
- LED verd: Indicates that PoE power is being supplied to the connected device.
- Amber/Red LED (if present): May indicate a fault condition, overcurrent, or a non-PoE device connected. Consult the specific product label for detailed LED behavior.
Control remot
The NetWay16 supports remote control functionality, as indicated in its specifications. For detailed instructions on configuring and utilizing remote control features, refer to the comprehensive technical documentation available on the Altronix website or contact Altronix technical support.
Manteniment
Neteja
To clean the unit, disconnect power and use a soft, dry cloth. Do not use liquid or aerosol cleaners, as they may damage the unit. Ensure ventilation openings remain clear of dust and debris.
Consideracions ambientals
The NetWay16 has an International Protection Rating of IP54, meaning it is protected from limited dust ingress and from water spray from any direction. While robust, avoid exposing the unit to extreme temperatures, direct sunlight, or excessive moisture to ensure optimal performance and longevity.
Actualitzacions de firmware
Periodically check the Altronix weblloc web per a les actualitzacions de firmware disponibles. Les actualitzacions de firmware poden millorar el rendiment, afegir noves funcions o solucionar vulnerabilitats de seguretat. Seguiu atentament les instruccions que s'inclouen amb el paquet d'actualització de firmware.
Resolució de problemes
Sense alimentació a la unitat
- Verify that the power supply is correctly connected and functioning.
- Comproveu el funcionament de la presa de corrent.
- Assegureu-vos que el cable d'alimentació no estigui danyat.
No PoE to Connected Device
- Confirm the connected device is PoE-compatible (IEEE 802.3af).
- Comproveu si el cable Ethernet està danyat o connectat incorrectament.
- Ensure the device is within the 15.4W power budget per port.
- Observe the port indicator lights for any fault indications.
Problemes de connectivitat de xarxa
- Verify the connection from the network switch/router to the NetWay16 input port.
- Test the network cables for continuity.
- Ensure the connected devices are properly configured for network access.
Especificacions
| Marca | Altronix |
| Número de model | NETWAY16 |
| Tipus de producte | PoE Injector Hub |
| Nombre de Ports | 16 |
| Estàndard PoE | IEEE 802.3af |
| Wattagper port | 15.4 watts (màxim) |
| Tipus de connector | RJ45 |
| Tipus de muntatge | Muntatge en rack |
| Dimensions del producte (L x A x A) | 8.5 x 19.13 x 1.65 polzades |
| Pes de l'article | 8 lliures |
| Classificació de protecció internacional | IP54 |
| Dispositius compatibles | IP cameras, VoIP phones, wireless access points, other PoE-enabled devices |
| Mètode de control | Remot |
Garantia i Suport
Altronix products are backed by a comprehensive warranty. For specific warranty terms and conditions, please refer to the warranty statement included with your product or visit the official Altronix website. For technical assistance, product support, or to report issues, please contact Altronix customer service through their official channels.
Altronix Weblloc: www.altronix.com
