Introducció
This manual provides essential information for the safe and efficient setup, operation, and maintenance of your Intex 10-Feet x 30-Inch Easy Set Pool. Please read all instructions carefully before assembly and use. Retain this manual for future reference.
Informació important de seguretat
- No deixeu mai els nens sense vigilància dins o a prop de la piscina.
- Es requereix la supervisió d'un adult en tot moment.
- No us submergiu ni salteu a la piscina.
- Ensure the pool is set up on firm, level ground.
- Follow all local regulations regarding pool safety and fencing.
Instruccions de configuració
Proper site preparation and assembly are crucial for the longevity and safety of your Easy Set Pool. Follow these steps carefully.
1. Preparació del lloc
Select a firm, level area in your backyard. Remove any sharp objects, debris, or uneven surfaces. The area should be slightly larger than the pool's diameter (10 feet).
Image: A prepared ground area with a blue tarp and grey yoga mats laid out, indicating a level and cushioned base for the pool.
It is recommended to place a ground cloth or tarp (not included) under the pool for added protection against punctures and to provide a slightly softer base. Some users also place foam mats or old yoga mats for extra cushioning.
2. Unpacking and Spreading the Pool Liner
Carefully unpack the pool from its box. Allow the pool liner to warm up in the sun for easier unfolding and to reduce wrinkles. Spread the pool liner evenly on the prepared, level ground.
Image: The blue and white checkered pool liner is spread out on a grassy area, ready for inflation and filling.
3. Inflating the Top Ring
Locate the inflation valve on the top ring of the pool. Use an air pump (electric pump recommended for efficiency) to inflate the top ring until it is firm but not over-inflated. Ensure the valve is securely closed after inflation.
As per the provided data, no official seller videos for this product were available that met the strict criteria for embedding instructional content.
4. Filling the Pool with Water
Begin filling the pool with water using a garden hose. As the water level rises, the pool walls will naturally rise and take shape. Smooth out any wrinkles on the bottom of the pool as it fills. Stop filling when the water reaches the indicated fill line, typically just below the inflated top ring.
Image: An Intex Easy Set Pool filled with water, with children enjoying themselves, demonstrating the pool's capacity and recreational use.
5. Connexió de la bomba del filtre
Connect the included filter pump to the designated inlet and outlet fittings on the pool liner. Ensure all connections are secure to prevent leaks. Refer to the separate filter pump manual for detailed assembly and operation instructions for the pump.
Image: A close-up of the Intex Easy Set Pool showing the filter pump connected to the pool's side, with hoses running to and from the pump.
As per the provided data, no official seller videos for this product were available that met the strict criteria for embedding instructional content.
Funcionament de la piscina
Once set up, your Intex Easy Set Pool is ready for use. Follow these guidelines for optimal enjoyment.
Nivell d'aigua
Maintain the water level between the upper and lower fill lines. Overfilling can strain the pool structure, while underfilling can affect pump performance.
Funcionament de la bomba de filtre
Operate the filter pump daily to ensure proper water circulation and filtration. The recommended run time is typically 2-4 hours per day, depending on usage and water clarity. Consult the pump manual for specific timer settings.
Manteniment
Regular maintenance is essential to keep your pool water clean and safe.
Química de l'aigua
Test your pool water regularly using a pool test kit. Adjust pH, alkalinity, and sanitizer levels (e.g., chlorine) as needed to maintain proper balance. Follow the chemical manufacturer's instructions for dosage.
Neteja de la piscina
- Desnatat: Feu servir una xarxa per a escumadors de piscina per eliminar fulles, insectes i altres restes de la superfície de l'aigua diàriament.
- Aspirar: Periodically vacuum the bottom of the pool to remove settled debris. A garden hose with suction can be used for this purpose.
- Neteja del revestiment: Gently wipe down the pool liner with a soft brush or cloth to prevent algae buildup.
Cura del cartutx del filtre
The filter cartridge should be rinsed with a garden hose every few days and replaced every 2-4 weeks, or as needed, depending on pool usage and water conditions. A dirty filter cartridge reduces pump efficiency.
Resolució de problemes
Aquí teniu solucions a problemes comuns que podeu trobar:
| Problema | Causa possible | Solució |
|---|---|---|
| Aigua ennuvolada | Poor filtration, chemical imbalance, high debris load. | Run pump longer, clean/replace filter, adjust water chemistry, shock treat pool. |
| Creixement d'algues | Low sanitizer levels, poor circulation. | Shock treat with algaecide, brush pool walls, ensure proper filtration. |
| Leaking Pool | Puncture in liner, loose hose connections. | Locate and patch hole with repair kit, tighten all hose clamps. |
| La bomba no funciona | Power issue, clogged filter, air in system. | Check power supply, clean filter, bleed air from pump. |
Especificacions
- Marca: Intex
- Model: 56921EG
- Approximate Set-up Size: 10 ft x 30 in (305cm x 76cm)
- Capacitat d'aigua (80%): 1,018 L (3,853 gal)
- Material: Clorur de polivinil (PVC)
- Components inclosos: Filter Pump (530 gallon/hour flow rate)
- Muntatge requerit: No (Easy Set-up)
- Ús interior/exterior: A l'aire lliure
- Pes de l'article: 24.6 lliures
Garantia i Suport
For warranty information, product registration, or technical support, please refer to the documentation included with your product or visit the official Intex weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.
Informació de contacte: Refer to your product packaging or the Intex weblloc web per obtenir les dades de contacte del servei d'atenció al client més actualitzades.
