1. Producte acabatview
This manual provides instructions for the SINGER Foot Controller and Power Cord, Model 359102001. This unit serves as a combined foot pedal and power supply for compatible SINGER sewing machines, enabling control over sewing speed and providing electrical power.
1.1. Característiques clau
- Integrated foot controller and power cord.
- Genuine SINGER replacement part.
1.2. Compatible SINGER Sewing Machine Models
This foot controller and power cord is compatible with the following SINGER sewing machine models:
- Cantant 1105
- Cantant 1116
- Cantant 1120
- Cantant 1130
- Cantant 118
- Cantant 1525
- Cantant 1725
- Cantant 1748
- Cantant 2639
- Cantant 2662
- Cantant 2712
- Cantant 2722
- Cantant 2732
- Cantant 2718
- Cantant 2724
- Cantant 2730
- Singer 3116 Simple
- Cantant 3709
- Cantant 3722
- Cantant 3810
- Cantant 3820
- Cantant 3825
- Cantant 3962
- Cantant 4102
- Singer 4205 Inspiration
- Singer 4206 Inspiration
- Singer 4210 Inspiration
- Singer 4212 Inspiration
- Singer 4220 Inspiration
- Singer 4228 Inspiration
- Cantant 6510
- Cantant 6550
- Cantant 7312
- Cantant 7322
- Cantant 7350
- Singer 14T98DS
2. Instruccions de configuració
Follow these steps to properly connect the foot controller and power cord to your SINGER sewing machine.
2.1. Connecting the Foot Controller to the Sewing Machine
- Identify the Connector Port: Locate the power and foot controller input port on your SINGER sewing machine. This port typically has three holes designed to receive the three-pin connector of the foot controller.
- Align the Connector: Take the three-pin connector end of the foot controller cord. Carefully align the three pins with the corresponding holes in the sewing machine's input port. Ensure the connector is oriented correctly to avoid bending the pins.
- Inseriu el connector: Gently push the connector firmly into the port until it is fully seated. Do not force the connection.
Image: Three-pin connector for the sewing machine input.
Image: Connector dimensions for proper fit.
2.2. Connecting to Power Outlet
- Ensure Machine is Off: Before plugging into a power outlet, ensure your sewing machine's power switch is in the OFF position.
- Connecteu-vos a la presa de corrent: Insert the two-prong power plug into a standard electrical wall outlet. Ensure the outlet provides the correct voltage (120V AC for North American models).
Image: Power plug with voltage especificacions.
Image: Complete foot controller and power cord assembly.
Image: SINGER Foot Controller and Power Cord.
3. Instruccions de funcionament
Once the foot controller is properly connected, you can begin operating your sewing machine.
3.1. Controlling Sewing Speed
- Enceneu la màquina: Flip the power switch on your sewing machine to the ON position. The machine's light may illuminate.
- Aplicar pressió: Place your foot on the foot pedal. The sewing machine's speed is directly controlled by the amount of pressure you apply to the pedal.
- Augmenta la velocitat: Press down gently for slower speeds. Increase pressure for faster sewing speeds.
- Stop Sewing: Release pressure from the pedal to stop the machine.
4. Cura i Manteniment
Proper care ensures the longevity and reliable performance of your foot controller.
- Neteja: Wipe the foot controller and cord with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners. Ensure no liquids enter the pedal mechanism.
- Emmagatzematge: When not in use, store the foot controller and cord in a clean, dry place, away from direct sunlight and extreme temperatures. Avoid kinking or tightly wrapping the cord.
- Inspecció: Periodically inspect the cord for any signs of damage, such as fraying, cuts, or exposed wires. If damage is observed, discontinue use and replace the unit.
5. Solució De Problemes
If you encounter issues with your foot controller, refer to the following common problems and solutions.
5.1. Sewing Machine Does Not Power On
- Comproveu les connexions: Ensure the three-pin connector is fully inserted into the sewing machine's port and the power plug is securely in the wall outlet.
- Verifica l'alimentació: Test the wall outlet with another appliance to confirm it is receiving power. Check your home's circuit breaker if necessary.
- Machine Power Switch: Confirm the sewing machine's power switch is in the ON position.
5.2. No Speed Control or Machine Runs at Full Speed
- Pedal Functionality: Ensure the foot pedal mechanism moves freely and returns to its resting position when pressure is released.
- Problema intern: If the machine consistently runs at full speed or has no speed variation despite pedal pressure, there may be an internal issue with the foot controller or the sewing machine itself. Consider contacting SINGER customer support or a qualified technician.
5.3. Intermittent Power or Operation
- Dany del cable: Inspect the entire length of the power cord and foot controller cord for any visible damage, such as cuts, kinks, or exposed wiring. Damaged cords can cause intermittent power.
- Connexions soltes: Re-seat all connections, ensuring they are firm and secure.
6. Especificacions del producte
| Especificació | Detall |
|---|---|
| Marca | CANTANT |
| Número de model | 359102001 |
| Dimensions del producte | 6.1 x 4.7 x 2.1 polzades |
| Pes de l'article | 10.6 unces |
| Material | Plàstic |
| Fabricant | Cantant |
| ASIN | B002L2Z73A |
| UPC | 798804837419, 037431889041 |
| Piles necessàries | No |
7. Garantia i Suport
For warranty information or technical support regarding your SINGER Foot Controller and Power Cord, please refer to the documentation included with your original sewing machine or visit the official SINGER weblloc.
You can also contact SINGER customer service directly for assistance with product-specific inquiries or troubleshooting beyond the scope of this manual.
