Introducció
This manual provides essential instructions for the safe and efficient operation, maintenance, and care of your Vollrath 1-1/2HP Meat Grinder No. 22. Please read this manual thoroughly before initial use and retain it for future reference.
Instruccions importants de seguretat
ADVERTIMENT: To reduce the risk of injury, always follow basic safety precautions when using electrical appliances.
- Read all instructions before operating the grinder.
- Keep hands and utensils out of the feed chute while operating to prevent injury. Always use the food pusher provided.
- Ensure the grinder is properly assembled and all parts are securely fastened before use.
- Desendolleu l'aparell de la presa de corrent quan no l'utilitzeu, abans de posar o treure peces i abans de netejar-lo.
- No feu servir cap aparell amb un cable o un endoll danyats, o després que l'aparell funcioni malament o s'hagi fet malbé de cap manera.
- This appliance is for commercial use. Do not use outdoors.
- No submergiu la carcassa del motor en aigua o altres líquids.
- Mantenir els nens allunyats de l'aparell durant el funcionament.
Què hi ha a la caixa
En desembalar-lo, comproveu que tots els components siguin presents i no estiguin danyats:
- Vollrath 1-1/2HP Meat Grinder (Electric Motor Unit)
- Stainless Steel Feed Tray
- Grinding Head Assembly (includes worm gear, cutting blade, grinding plate, and retaining ring)
- Empenjador d'aliments
- Sausage Stuffing Tube (if included with model)
Image: The Vollrath 1-1/2HP Meat Grinder No. 22, showing the main unit, stainless steel feed tray, grinding head, food pusher, and a sausage stuffing tube.
Muntatge i muntatge
- Col·locació: Place the grinder on a stable, level, and dry surface. Ensure there is adequate space around the unit for ventilation and operation.
- Attach Grinding Head: Insert the worm gear into the grinding head. Place the cutting blade onto the worm gear shaft, followed by the desired grinding plate. Secure these components with the retaining ring, tightening it firmly but not excessively.
- Mount Grinding Head: Attach the assembled grinding head to the motor unit's output shaft, ensuring it locks into place.
- Install Feed Tray: Position the stainless steel feed tray onto the top of the grinding head.
- Connexió d'alimentació: Ensure the power switch is in the "OFF" position before plugging the unit into a grounded electrical outlet.
Instruccions de funcionament
- Prepare Meat: Cut meat into pieces that fit easily into the feed chute. Remove bones, gristle, and excessive fat. For best results, chill the meat before grinding.
- Load Tray: Place the prepared meat into the feed tray.
- Inicia el molinet: Gireu l'interruptor d'alimentació a la posició "ON". El motor s'engegarà.
- Feed Meat: Gently push the meat into the feed chute using only the provided food pusher. Never use your hands or other utensils.
- Funció endavant/enrere: If the grinder jams, switch the unit to "OFF", then briefly to "REV" (Reverse) to clear the obstruction. Switch back to "OFF" before returning to "ON" for normal operation.
- Atura la mòlta: Once all meat is processed, turn the power switch to "OFF". Unplug the unit from the power outlet.
Manteniment i Neteja
Regular cleaning and maintenance ensure the longevity and hygienic operation of your meat grinder.
- Desmuntatge: Ensure the unit is unplugged. Disassemble the grinding head, removing the retaining ring, grinding plate, cutting blade, and worm gear. Remove the feed tray.
- Cleaning Parts: All stainless steel parts (feed tray, grinding head components) are dishwasher-safe. For manual cleaning, wash with warm, soapy water and a non-abrasive brush. Rinse thoroughly and dry immediately to prevent water spots or corrosion.
- Unitat motora: Netegeu la carcassa del motor amb un anunciamp tela. No submergiu mai la unitat del motor a l'aigua.
- Emmagatzematge: Store all cleaned and dried parts in a clean, dry place.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El molinet no arrenca. | No connectat; interruptor apagat; interruptor automàtic saltat. | Check power connection; ensure switch is ON; reset circuit breaker. |
| Grinder jams or slows down. | Too much meat fed at once; bones/gristle present; dull blade/plate. | Use "REV" switch to clear; cut meat smaller; inspect/replace blade/plate. |
| Meat is mushy or smeared. | Meat not cold enough; dull blade/plate. | Chill meat thoroughly; inspect/replace blade/plate. |
Especificacions
- Número de model: 40744
- Motor: 1.5 CV
- Material: Stainless Steel (body, cylinder, worm gear)
- Dimensions (L x A x A): 20.25" x 10.2" x 24.25"
- Pes del producte: Aproximadament 103.5 lliures
- Font d'alimentació: Elèctric amb cable
- Capacitat de sortida: Up to 528 lbs per hour
Garantia i assistència al client
For warranty information, service, or technical assistance, please contact Vollrath Customer Support. Refer to your purchase documentation for specific warranty terms and conditions.
Informació de contacte: Please visit the official Vollrath website or refer to the contact details provided with your product packaging for the most current support information.
