Woods 59008 In-Wall Digital Countdown Timer User Manual

Introducció

The Woods 59008 In-Wall Digital Countdown Timer is designed to automatically turn off connected appliances or lighting after a preset time, promoting energy efficiency and convenience. This timer replaces standard wall switches and offers multiple countdown settings for various applications.

It is ideal for controlling bathroom fans, lights, and other outlets, ensuring they do not run unnecessarily. The unit comes with 5 settings: 10-Minute, 20-Minute, 30-Minute, 60-Minute, and Off. It easily fits decorator switch plates (single or multi-gang) and is compatible with compact fluorescent bulbs, LED, and incandescent lights.

Informació de seguretat

WARNING: Installation should be made by a licensed electrician. To avoid fire, shock, or death, turn off power at the circuit breaker and test that power is OFF before wiring. Neutral wire is required for this timer to function. This timer is not compatible with 3-way switches. For indoor use only. Do not exceed rated capacity.

• Desconnecteu sempre l'alimentació a l'interruptor automàtic abans de la instal·lació o el manteniment.
• Assegureu-vos que totes les connexions de cablejat siguin segures i que compleixin els codis elèctrics locals.
• Do not exceed the specified electrical ratings of the timer.
• Aquest dispositiu només és per a ús interior.
• Do not attempt to modify or repair the unit. Refer to qualified personnel for service.

Contingut del paquet

• Woods 59008 In-Wall Digital Countdown Timer
• Wire Nuts (typically included)
• Manual d'instruccions (aquest document)

Image: Woods 59008 Countdown Timer in its retail packaging, showing the product and branding.

Instal·lació

This timer is designed to replace a standard single-pole wall switch. A neutral wire is required for proper operation.

Eines necessàries:

• Tornavís (Phillips i Flathead)
• Pelafils
• Voltage Tester
• Cinta elèctrica (opcional)

Wiring Diagram and Connections:

Imatge: Lateral view of the Woods 59008 timer with its wiring diagram clearly visible, indicating connections for Hot (Black), Load (Red), Ground (Green), and Neutral (White).

The timer has four wires: Black (Hot), Red (Load), White (Neutral), and Green (Ground).

Passos d'instal·lació:

1. Apagueu l'alimentació to the switch at the circuit breaker. Verify power is off using a voltage provador.
2. Remove the existing wall plate and switch from the electrical box.
3. Carefully disconnect the wires from the old switch. Note which wire was connected to the "line" (hot) and "load" (to the fixture).
4. Connect the Woods 59008 timer wires to your house wiring using wire nuts:
   • Connecteu el Negre wire from the timer to the Hot (Line) wire from the electrical box.
   • Connecteu el Vermell wire from the timer to the Carrega wire (to the light/appliance).
   • Connecteu el Blanc wire from the timer to the Neutre wire from the electrical box. (A neutral wire is typically white and often bundled with other white wires in the box).
   • Connecteu el Verd wire from the timer to the Terra wire (bare copper or green insulated wire) from the electrical box.
5. Carefully push the wired timer into the electrical box.
6. Secure the timer to the electrical box using the provided screws.
7. Install a decorator-style wall plate (not included) over the timer.
8. Torneu a encendre l'alimentació al disjuntor.
9. Test the timer's functionality.

Imatge: Frontal view of the Woods 59008 In-Wall Digital Countdown Timer, showing the timer face with 10, 20, 30, 60 minute, and OFF settings, and the attached wiring harness.

Instruccions de funcionament

The Woods 59008 timer features five preset countdown options and an OFF setting.

Image: Close-up of the Woods 59008 timer's control panel, clearly showing the 10 MIN, 20 MIN, 30 MIN, 60 MIN, and OFF buttons with their respective indicator lights.

1. To activate the timer, press the desired time button (10 MIN, 20 MIN, 30 MIN, or 60 MIN).
2. The corresponding LED indicator light next to the selected time will illuminate, indicating the timer is active and counting down.
3. The connected device (light, fan, etc.) will turn on.
4. Once the selected time has elapsed, the timer will automatically turn off the connected device.
5. To manually turn off the device before the countdown completes, press the "OFF" button. The LED indicator will turn off.

The timer provides a visual indication of the remaining time by the illuminated LED. As time progresses, the next lower time setting's LED will illuminate, and the previous one will turn off, until the "OFF" LED is lit, signifying the end of the cycle.

Manteniment

• The Woods 59008 timer requires no special maintenance.
• To clean the surface, wipe with a soft, damp tela. No utilitzeu netejadors abrasius ni dissolvents.
• Ensure power is off at the circuit breaker before cleaning the unit.

Resolució de problemes

If troubleshooting steps do not resolve the issue, contact Woods customer support or consult a qualified electrician.

Especificacions

• Model: 59008
• Color: Blanc
• Entrada Voltage: 120V CA, 60Hz
• Càrrega resistiva: 15 A, 1875 W
• Tungsten Load: 8 A, 1000 W
• Ballast Load: 8A, 1000VA
• Motor: 1 / 4 HP
• Dimensions: 3"D x 6"W x 2.25"H (Product dimensions, likely referring to the faceplate area and depth)
• Pes de l'article: 5.6 unces
• Tipus d'interruptor: Single-pole (2-way)
• Compatibilitat: CFL, LED, Incandescent compatible
• Certificacions: Llistat UL

Imatge: Enrere view of the Woods 59008 timer, displaying detailed electrical specifications and certifications.

Garantia i Suport

For warranty information or technical support, please refer to the official Woods weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el rebut de compra per a reclamacions de garantia.

Woods Customer Service: Si us plau, visiteu www.woods.com per obtenir dades de contacte i més ajuda.