Producte acabatview
The ATD Tools 2114 is a compact 1/4-inch drive air ratchet designed for various applications, particularly in body and engine shops, and for tasks requiring access to confined areas. It features a durable aluminum housing and a black finished head assembly with a tang style forward/reverse knob and a ball-type socket retainer.
Característiques principals:
- Maximum torque: 25 feet/pounds
- Free speed: 250 rpm
- Average air consumption: 4.2 cfm
- Longitud: 6.7 polzades
Image: The ATD Tools 2114 1/4-inch Drive Air Ratchet, featuring its sleek aluminum body and black ratchet head with a square drive.
Configuració
Before operating the air ratchet, ensure you have a clean, dry, and regulated air supply. Proper setup is crucial for optimal performance and tool longevity.
- Connexió de subministrament d'aire: Connect the air ratchet to an air compressor using a 1/4-inch NPT air inlet. Ensure all connections are secure and leak-free.
- Air Pressure Regulation: Set your air compressor's regulator to the recommended operating pressure, typically around 90 PSI (6.2 bar). Do not exceed the maximum recommended pressure for the tool.
- Lubricació: Before first use and regularly thereafter, apply a few drops of pneumatic tool oil into the air inlet. This lubricates internal components and helps prevent corrosion.
- Mànega i accessoris: Use an air hose with an adequate inner diameter (e.g., 3/8-inch) to ensure sufficient airflow to the tool. Check all quick-connect fittings for proper sealing.
Instruccions de funcionament
Follow these steps for safe and effective operation of your ATD Tools air ratchet.
- Endoll adjunt: Select the appropriate 1/4-inch drive socket for your fastener. Push the socket firmly onto the square drive anvil until it locks into place with the ball retainer.
- Selecció de direcció: The tool features a tang style forward/reverse knob. Rotate the knob to select the desired direction (clockwise for tightening, counter-clockwise for loosening).
- Tool Engagement: Place the socket squarely onto the fastener.
- Operació disparadora: Depress the trigger to activate the tool. The speed of the ratchet is controlled by the amount of trigger depression. Release the trigger to stop the tool.
- Precaucions de seguretat: Always wear appropriate eye protection. Ensure the workpiece is stable. Do not over-tighten fasteners; use a torque wrench for final tightening if specific torque values are required. Disconnect the air supply when changing accessories or performing maintenance.
Manteniment
Regular maintenance will extend the life and ensure the consistent performance of your air ratchet.
- Lubricació diària: Add 5-10 drops of pneumatic tool oil into the air inlet before and after each use, or every few hours of continuous operation.
- Air Filter/Lubricator: If your air system includes an in-line air filter and lubricator, ensure the filter is clean and the lubricator reservoir is filled with pneumatic tool oil.
- Neteja: Keep the tool clean and free of debris. Wipe down the exterior with a clean cloth. Do not use harsh solvents that could damage the housing.
- Emmagatzematge: Store the tool in a clean, dry environment when not in use. Disconnect it from the air supply.
- Inspecció: Periodically inspect the tool for any signs of wear, damage, or air leaks. Address any issues promptly.
Resolució de problemes
If you encounter issues with your air ratchet, refer to the following common troubleshooting steps.
| Problema | Causa possible | Solució |
|---|---|---|
| Tool not operating or low power | Pressió d'aire insuficient Falta de lubricació Obstructed air inlet Worn internal parts | Check air compressor pressure and regulator setting Add pneumatic tool oil Elimineu qualsevol obstrucció de l'entrada d'aire Poseu-vos en contacte amb personal de servei qualificat |
| Fuites d'aire de l'eina | Accessoris solts Juntes tòriques o segells danyats | Tighten all air connections Replace worn or damaged seals/O-rings |
| Vibració excessiva | Coixinets desgastats Components solts | Contact qualified service personnel for inspection and repair |
Especificacions
Detailed technical specifications for the ATD Tools 2114 1/4" Drive Air Ratchet.
| Especificació | Valor |
|---|---|
| Marca | ATD |
| Model | 2114 |
| Material | Alumini |
| Longitud de l'element | 6.7 polzades |
| Pes de l'article | 1.3 lliures |
| Parell màxim | 25 peus lliures |
| Velocitat lliure | 250 rpm |
| Consum mitjà d'aire | 4.2 cfm |
| Mode d'operació | Pneumàtic |
| Estil del cap | Plaça Fixa |
Garantia i Suport
For information regarding warranty coverage, service, or technical support for your ATD Tools 2114 Air Ratchet, please refer to the documentation included with your purchase or visit the official ATD Tools website. You may also contact ATD Tools customer service directly for assistance.
Es recomana guardar el tiquet de compra com a comprovant de compra per a qualsevol reclamació de garantia.
