Manual d'usuari de l'APC Smart-UPS 2200VA (SMT2200)

1. Introducció

The APC Smart-UPS 2200VA (SMT2200) is a high-performance Uninterruptible Power Supply (UPS) designed to provide reliable battery backup and surge protection for critical electronic equipment. It delivers pure sine wave output, ensuring compatibility with sensitive electronics and active Power Factor Corrected (PFC) power supplies. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your SMT2200 UPS.

For a comprehensive user guide, please refer to the official Guia de l'usuari (PDF).

2. Producte acabatview

The SMT2200 UPS features a 2200VA / 1980W capacity, 8 battery backup and surge protector outlets, and an LCD display for easy monitoring. It incorporates network-grade power supply conditioning to protect against damaging surges and disruptive noise. Solid-state Automatic Voltage Regulation (AVR) corrects low and high input voltages without relying on battery power, extending battery life.

Figura 2.1: Frontal view of the APC Smart-UPS 2200VA (SMT2200) unit, showing the display and control buttons.

Figura 2.2: posterior view of the APC Smart-UPS 2200VA, highlighting the input/output ports and product label. The label shows model SMT2200 and serial number AS1308140507.

Figura 2.3: Part posterior inclinada view of the APC Smart-UPS 2200VA, showing the power cord connected and various outlets.

3. Configuració i instal·lació

Proper setup is crucial for optimal performance and safety. The SMT2200 requires a 20-amp wall plug (NEMA 5-20R outlet) due to its power requirements. Ensure your electrical infrastructure can support this. The unit is heavy (112 pounds), so plan for appropriate handling during installation.

3.1 Col·locació inicial

• Place the UPS in a cool, dry, and well-ventilated area, away from direct sunlight or heat sources.
• Ensure adequate clearance around the unit for proper airflow.
• La unitat està dissenyada només per a ús en interiors.

3.2 Connexió de la bateria

The UPS is shipped with the internal battery disconnected for safety. Connect the battery as per the instructions provided in the full user manual. Ensure a secure connection before proceeding.

3.3 Connexió d'alimentació

• Connect the UPS power cord to a dedicated 20-amp, presa de corrent de 120 V.
• Connect your equipment (servers, network devices, etc.) to the 8 battery backup and surge protector outlets on the rear of the UPS.

3.4 Network Connectivity (SmartConnect)

The SMT2200 supports APC SmartConnect for cloud-enabled UPS monitoring and management. Connect the UPS to your network using the dedicated Ethernet port on the rear panel.

Vídeo 3.1: Un overview of APC SmartConnect setup and features, demonstrating how to connect and monitor your UPS remotely. This video highlights the ease of setup and the benefits of cloud-enabled management for distributed IT environments.

To set up SmartConnect:

1. Connect the UPS to your network via the dedicated Ethernet port.
2. Scan the QR code on the UPS (or use the product ID/key) to register your device with the SmartConnect web portal.
3. Create an account on the SmartConnect portal if you don't have one.
4. Un cop registrat, pots view UPS status, receive lifecycle notifications, simplify firmware updates, and access support from any internet-connected device.

4. Funcionament del SAI

4.1 Engegada/apagada

• To power on the UPS, press and hold the power button on the front panel until the display illuminates.
• Per apagar l'aparell, premeu i manteniu premut el botó d'engegada de nou fins que la pantalla s'apagui.

Pantalla LCD 4.2 i navegació

The intuitive LCD display provides real-time status information, including battery charge, load level, estimated runtime, input/output voltage, and frequency. Use the navigation buttons to scroll through different parameters and access settings.

4.3 Volum automàtictagReglament (AVR)

The UPS automatically adjusts for minor voltage fluctuations (brownouts and overvoltages) without switching to battery power. This feature protects connected equipment and extends battery life.

4.4 Funcionament amb bateria de reserva

En cas d'una potènciatage, the UPS will automatically switch to battery power, providing continuous power to connected devices. The runtime depends on the connected load. The SMT2200 provides approximately 15 minutes of runtime with a 900-watt load.

5. Manteniment

5.1 Cura de la bateria

• The typical recharge time for the battery is 3 hours.
• Regularly check the battery status via the LCD display or SmartConnect portal.
• Replace batteries when indicated by the UPS or SmartConnect notifications to ensure continued protection. Swollen batteries indicate a critical failure and require immediate replacement.

5.2 Neteja

Keep the UPS clean and free of dust. Use a dry cloth to wipe down the exterior. Do not use liquid cleaners or solvents.

5.3 actualitzacions de microprogramari

SmartConnect simplifies firmware updates, ensuring your UPS operates with the latest features and improvements. Follow the instructions provided through the SmartConnect portal for any available updates.

6. Solució De Problemes

This section covers common issues and their solutions. For more complex problems, refer to the full user manual or contact APC support.

7. Especificacions

8. Garantia i Suport

APC Smart-UPS products typically come with a standard manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your product or visit the official APC website. Support is available through the APC SmartConnect portal, which provides easy access to expert advice and troubleshooting resources.

És possible que hi hagi plans de protecció addicionals disponibles per a la compra, que ofereixin una cobertura ampliada més enllà de la garantia estàndard.