Introducció
The All-Clad T225 Digital Timer and Clock is designed to provide precise timekeeping and countdown functionality for your kitchen. Featuring a durable stainless steel casing and a clear LCD display, this device combines a 24-hour clock with a versatile timer, making it an essential tool for various cooking and timing needs.
Producte acabatview
Descripció de la imatge: Un front view of the All-Clad T225 Digital Timer and Clock. The device features a brushed stainless steel finish with a blue LCD display showing "12:12 CLOCK" on the left and "0:00" on the right. Below the display are four round buttons labeled "MODE", "HOUR", "MIN", and "SEC", and a rectangular "START-STOP / CLEAR" button at the bottom center.
The All-Clad T225 features an intuitive interface with dedicated buttons for mode selection, hour, minute, and second adjustments, and a combined start/stop/clear function. The angled front panel enhances visibility, and the unit is powered by two AA batteries.
Configuració
1. Instal·lació de la bateria
- Localitzeu el compartiment de la bateria a la part posterior de la unitat.
- Obriu la tapa del compartiment de la bateria.
- Introduïu dues (2) piles AA, assegurant-vos de la polaritat correcta (+/-) tal com s'indica a l'interior del compartiment.
- Tanqueu bé la tapa del compartiment de la bateria.
The unit will power on automatically once batteries are installed. If the display does not light up, check battery orientation or replace with fresh batteries.
Instruccions de funcionament
1. Configuració del rellotge
- Premeu el botó MODE button until "CLOCK" is displayed on the left side of the LCD.
- Manteniu premut el botó MODE durant aproximadament 3 segons fins que els dígits de les hores comencin a parpellejar.
- Premeu el botó HORA per ajustar l’hora.
- Premeu el botó MIN per ajustar els minuts.
- Premeu el botó MODE de nou el botó per confirmar l'hora i sortir del mode de configuració.
2. Setting and Using the Timer (Countdown)
- Premeu el botó MODE button until the timer display (right side) shows "0:00".
- Premeu el botó HORA button to set the desired hours for the countdown.
- Premeu el botó MIN button to set the desired minutes for the countdown.
- Premeu el botó SEC button to set the desired seconds for the countdown.
- Per iniciar el compte enrere, premeu el botó INICIA-PARA botó. El temporitzador començarà el compte enrere.
- Per aturar el compte enrere, premeu la tecla INICIA-PARA botó de nou. Premeu-lo una vegada més per reprendre.
- When the timer reaches "0:00", an audible alarm will sound for 1 minute. The timer will then automatically begin to count up, indicating the elapsed time since the alarm.
- To stop the alarm and clear the timer, press the CLAR button (which is the same as INICIA-PARA when the alarm is active or timer is paused).
3. Clearing the Timer
- If the timer is running, press INICIA-PARA per aturar-lo.
- Manteniu premut el botó CLAR button (same as INICIA-PARA) for approximately 3 seconds to reset the timer to "0:00".
Manteniment
1. Neteja
- Netegeu la unitat amb un suau, damp tela.
- No utilitzeu netejadors abrasius ni submergiu la unitat en aigua.
- Ensure the unit is dry before storage or next use.
2. Substitució de la bateria
When the display becomes dim or the unit stops functioning, it is time to replace the batteries. Follow the battery installation steps outlined in the "Setup" section.
Resolució de problemes
| Problema | Solució |
|---|---|
| La pantalla està en blanc o tènue. | Check battery orientation. Replace batteries with new AA batteries. |
| L'alarma no sona. | Ensure the timer has counted down to "0:00". Check battery level. |
| Els botons no responen. | Remove and reinsert batteries to perform a soft reset. If issue persists, replace batteries. |
| Timer counts up immediately after setting. | Ensure you press INICIA-PARA to begin the countdown after setting the time. If it's already at "0:00" and counting up, it's in count-up mode (post-alarm). Press CLAR per reiniciar. |
Especificacions
- Model: T225
- Material: 18/10 Stainless Steel (front), Plastic (back)
- Visualització: LCD blau
- Font d'alimentació: 2 piles AA (incloses)
- Funcions: 24-hour Clock, Countdown Timer, Count-up Timer (post-alarm)
- Dimensions: 14.61 x 10.41 x 4.06 cm (aprox. 5.75 x 4.1 x 1.6 polzades)
- Pes: 272 g (aprox. 9.6 oz)
Garantia i Suport
All-Clad products are manufactured to high-quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official All-Clad website. For technical support or service inquiries, please contact All-Clad customer service through their official channels.
Podeu trobar més informació i dades de contacte a All-Clad official weblloc.
