1. Introducció
The Sioux Chief Tube Talon 555-4 is a specialized fastener designed to securely attach 1-inch PEX tubing to wood surfaces. This instruction manual provides essential information for proper installation and use, ensuring optimal performance and compliance with plumbing codes.
2. Approved Uses
The Tube Talon is approved for securing various types of tubing and lines to wood surfaces. Approved applications include:
- Tub de coure
- CPVC tube
- PEX/PB tube
- CSST lines
- Flexible gas tubing
- Plastic/steel conduit
- Vol baixtage DataCom cable

Image 1: Sioux Chief Tube Talon 555-4, a black plastic pipe support with an integrated nail, designed for securing 1-inch PEX tubing.
3. Instruccions d'instal·lació
Follow these steps for proper installation of the Tube Talon:
- Posicionament: Place the Tube Talon around the 1-inch PEX tubing at the desired fastening point on a wood surface.
- Alternating Direction: For secure installation, it is recommended to install fasteners in alternating directions. This means the integrated nail should be on alternating sides of the tubing being fastened along its run.
- Fastening Intervals: Install fasteners at intervals that comply with local plumbing codes for the specific type of pipe or tube being fastened. Consult your local codes for precise requirements.
- IPS Tube Sizing: When fastening IPS (Iron Pipe Size) tube, use the next larger size fastener. For example, if you are fastening 1/2-inch IPS tube, use a 3/4-inch fastener. This 1-inch Tube Talon is designed for 1-inch PEX tubing.
- Adjunt segur: Drive the integrated nail into the wood surface until the Tube Talon is firmly secured and the tubing is held in place without excessive movement.
4. Especificacions
| Fabricant | Cap Sioux |
| Número de part | 555-4 |
| Mida | 1 inch (for PEX Tubing) |
| Material | Plàstic |
| Quantitat de paquet d'articles | 1 |
5. Manteniment
The Sioux Chief Tube Talon is designed for long-term durability and requires minimal maintenance.
- Inspecció periòdica: Periodically inspect installed Tube Talons to ensure they remain securely fastened and that the tubing is properly supported.
- Neteja: Si cal, netejar amb anunciamp cloth. Avoid harsh chemicals that may degrade the plastic material.
6. Solució De Problemes
While the Tube Talon is a simple and reliable product, here are some common considerations:
- Tubing Not Secure: Ensure the nail is fully driven into the wood surface. Verify that the correct size Tube Talon is used for the tubing diameter. For IPS tubing, remember to use the next larger size fastener.
- Danys als elements de fixació: If a Tube Talon is damaged during installation or inspection, replace it immediately to maintain proper support.
- Compliance Issues: Always refer to local plumbing codes for specific requirements regarding fastener spacing and approved uses.
7. Garantia i Suport
For specific warranty information or technical support regarding the Sioux Chief Tube Talon 555-4, please contact Sioux Chief directly through their official weblloc o canals d'atenció al client.





