1. Producte acabatview
The Eltako WZR12-32A is a compact digital single-phase energy meter designed for accurate measurement of AC current consumption. It is suitable for both commercial and private applications, providing clear readings of energy usage in kilowatt-hours (kWh).
Figure 1: Eltako WZR12-32A Digital Single-Phase Energy Meter. This image shows the front view of the white energy meter, highlighting its digital display, input/output terminals, and control buttons. Key specifications like 230V, 50Hz, and 5(32)A are visible on the front panel.
2. Informació de seguretat
Llegiu atentament aquestes instruccions de seguretat abans de la instal·lació i el funcionament. Si no seguiu aquestes instruccions, podeu patir descàrregues elèctriques, incendis o danys al dispositiu.
- La instal·lació ha de ser realitzada per un electricista qualificat d'acord amb els codis i les normatives elèctriques locals.
- Ensure the main power supply is disconnected before any installation, wiring, or maintenance work.
- No feu servir el dispositiu si està danyat o mostra signes de mal funcionament.
- No exposeu el dispositiu a la humitat, a temperatures extremes ni a la llum solar directa.
- Aquest dispositiu està dissenyat només per a ús en interiors.
3. Contingut del paquet
El paquet inclou:
- 1 x Eltako WZR12-32A Digital Single-Phase Energy Meter
4. Especificacions
| Característica | Especificació |
|---|---|
| Marca | Eltako |
| Número de model | WZR12-32A |
| Tipus | Digital Single-Phase Energy Meter |
| Estàndard | EN 62053-21 |
| Voltage | 230 V, 50 Hz |
| Valoració actual | 5(32)A |
| Ús | Commercial and Private |
| Piles necessàries | No |
| Pes | 5 grams (Note: This weight is as per product specifications, but may be a data entry error as typical energy meters are heavier.) |
5. Configuració i instal·lació
The Eltako WZR12-32A is designed for DIN rail mounting. Ensure all power is disconnected before proceeding with installation.
5.1 Muntatge
- Locate a suitable DIN rail within your electrical panel or enclosure.
- Align the meter's mounting clips with the DIN rail.
- Press the meter firmly onto the rail until it clicks securely into place.
5.2 Cablejat
Refer to the wiring diagram printed on the meter and Figure 1 for terminal identification. Ensure correct polarity and secure connections.
- Phase (L) Input: Connect the incoming live wire to the "L IN" terminal.
- Phase (L) Output: Connect the outgoing live wire to the "L OUT" terminal.
- Neutral (N) Input: Connect the incoming neutral wire to the "N IN" terminal.
- Neutral (N) Output: Connect the outgoing neutral wire to the "N OUT" terminal.
After wiring, double-check all connections for tightness and correctness before restoring power.
6. Instruccions de funcionament
Once installed and powered, the meter will automatically begin measuring energy consumption.
6.1 Pantalla i botons
The meter features a digital display and two control buttons:
- Visualització: Shows energy consumption in kWh, and potentially instantaneous power (W) or apparent power (kW) depending on the mode.
- Botó MODE: Used to cycle through different display parameters (e.g., kWh, W, kW).
- Botó SELECCIÓ: Used for selecting or confirming options, or resetting certain values if applicable (refer to specific model features).
6.2 Reading Energy Consumption
The primary reading is typically in kWh (kilowatt-hours), which represents the total energy consumed over time. Press the MODE botó per view different parameters if available.
7. Manteniment
The Eltako WZR12-32A energy meter requires minimal maintenance.
- Mantingueu el dispositiu net i lliure de pols. Feu servir un drap suau i sec per netejar-lo.
- No utilitzeu netejadors abrasius ni dissolvents.
- There are no user-serviceable parts inside the meter. Do not attempt to open or repair the device.
8. Solució De Problemes
If you encounter issues with your energy meter, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| No display / Meter not turning on | No power supply to the meter; incorrect wiring. | Check main power supply. Verify all wiring connections are correct and secure according to the diagram. |
| Lectures incorrectes | Incorrect wiring; faulty device. | Ensure wiring is correct (Phase IN/OUT, Neutral). If problem persists, contact customer support. |
| Els botons no responen | Temporary software glitch; faulty buttons. | Try briefly disconnecting and reconnecting power (if safe to do so). If problem persists, contact customer support. |
9. Garantia i Suport
For warranty information, please refer to the terms and conditions provided by your retailer or the official Eltako weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.
For technical support or further assistance, please contact Eltako customer service or your local distributor. Contact details can typically be found on the manufacturer's official weblloc: www.eltako.com
