Manual d'usuari del temporitzador de paret amb ressort de 2 hores Intermatic FD2H

1. Introducció

The Intermatic FD2H 2-Hour Spring-Loaded Wall Timer is designed to replace standard wall switches, offering automatic control over lighting, fans, motors, and heaters. This mechanical timer operates without electricity, helping to limit the 'ON' time of connected loads and conserve energy. It is compatible with both standard and decorator style wall plates.

2. Producte acabatview i Característiques

The FD2H timer provides a simple, reliable solution for timed control of various electrical loads.

Figura 1: Frontal view of the Intermatic FD2H Wall Timer.

Característiques principals:

• No Electricity Required: Operates mechanically, consuming no power itself.
• Apagat automàtic: Limits the 'ON' time for connected loads.
• Compatibilitat versàtil: Designed to replace any standard or decorator style wall switch.
• Fàcil instal·lació: Features 'up front' terminal connections with teeter-type terminals and a 'press-on' knob design.
• Compatibilitat de càrrega: Suitable for incandescent, fluorescent, CFL, and LED lighting.
• No Neutral Connection: Does not require a neutral wire for operation.

Figure 2: Datasheet excerpt detailing features and electrical ratings for FD Series timers.

3. Configuració i instal·lació

ADVERTIMENT: To avoid fire, shock, or death, turn off power at the circuit breaker or fuse box and test that the power is off before wiring. Installation should be performed by a qualified electrician or in accordance with local electrical codes.

Passos d'instal·lació:

1. Apagueu l'alimentació: Locate the circuit breaker or fuse that controls the switch you are replacing and turn it off. Verify power is off using a voltage provador.
2. Elimina l'interruptor existent: Carefully remove the existing wall plate and switch from the wall box. Disconnect the wires from the old switch.
3. Connecteu el temporitzador: The FD2H timer typically has two wires for connection to the load and line. Connect the wires from the wall box to the timer's teeter-type terminals. Ensure connections are secure. Refer to the wiring diagrams below for specific configurations (SPST).
4. Muntar el temporitzador: Insert the timer into the wall box and secure it with the provided screws.
5. Instal·leu la placa de paret: Attach your standard or decorator style wall plate over the timer. The FD2H is designed to fit both without field modifications.
6. Attach Knob: Press the timer knob onto the timer shaft.
7. Restaura l'alimentació: Torneu a connectar l'alimentació a l'interruptor o a la caixa de fusibles.

Figure 3: Wiring diagrams for various FD Series timer applications, including SPST motor control.

The FD2H is a Single Pole Single Throw (SPST) timer. Ensure your application is compatible with an SPST configuration. For 3-way switch applications, consult a qualified electrician.

4. Instruccions de funcionament

The Intermatic FD2H timer is simple to operate:

1. Per activar: Rotate the timer knob clockwise to the desired 'ON' time (up to 2 hours). The timer will begin counting down immediately.
2. Apagat automàtic: The connected load will remain 'ON' for the set duration and then automatically turn 'OFF' when the timer reaches zero.
3. Manual Override (OFF): To turn off the load before the set time expires, rotate the knob counter-clockwise past the 'OFF' position.

Figura 4: Example of an Intermatic FD2H Wall Timer installed in a residential setting.

5. Manteniment

The Intermatic FD2H timer is a mechanical device designed for long-term, maintenance-free operation. No internal user-serviceable parts are present.

• Neteja: To clean the timer and wall plate, wipe with a soft, damp tela. No utilitzeu netejadors abrasius ni dissolvents.
• Inspecció: Periodically inspect the timer and wall plate for any signs of damage or loose connections. If damage is observed, turn off power at the circuit breaker and have the unit inspected by a qualified electrician.

6. Solució De Problemes

If you experience issues with your FD2H timer, refer to the following common problems and solutions:

7. Especificacions

Detailed technical specifications for the Intermatic FD2H Wall Timer:

• Model: FD2H
• Tipus: Spring-Loaded Mechanical Timer
• Cicle de temps: 2 hores
• Tipus d'interruptor: SPST (Single Pole Single Throw)
• Color: Marfil
• Material: Plàstic
• Valoracions elèctriques:
  • 20 Amp, 125 V CA, 50/60 Hz
  • 10 Amp, 250 V CA, 50/60 Hz
  • 10 Amp, 277 V CA, 50/60 Hz
  • 7 Amp, 125 VAC (Tungsten)
  • 1 HP, 120 VAC, 50/60 Hz (Motor)
  • 2 HP, 240 VAC, 50/60 Hz (Motor)
• Temperatura de funcionament: -40 °F a 104 °F (-40 °C a 40 °C)
• Dimensions: 2.1 x 1.75 x 2.75 polzades (Producte)
• Pes de l'article: 4.8 unces
• Tipus de muntatge: Mur
• UPC: 078275073999

Figure 5: Table showing various FD Series models, time cycles, and switch types.

8. Informació de la garantia

The Intermatic FD2H 2-Hour Spring-Loaded Wall Timer comes with a Garantia limitada d'1 any. This warranty typically covers defects in materials and workmanship under normal use. In the event of a defect within the warranty period, the unit may be replaced. Please retain your proof of purchase for warranty claims.

For specific warranty terms and conditions, refer to the documentation included with your product or contact Intermatic customer support.

9. Atenció al client

For further assistance, technical support, or warranty inquiries regarding your Intermatic FD2H Wall Timer, please contact Intermatic customer service directly. You can typically find contact information on the official Intermatic weblloc web o dins de l'embalatge del producte.

Fabricant: Intermatic