1. Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of the Intermatic MIL72ESTUZH-120 24-Hour 120V Flush Mount Electromechanical Time Control. Please read this manual thoroughly before attempting to install or operate the device to ensure safe and correct usage.
2. Informació de seguretat
WARNING: Risk of Electric Shock. Disconnect power at the circuit breaker or fuse box before installation or servicing.
- Tot el cablejat ha d'ajustar-se als codis elèctrics locals i nacionals.
- La instal·lació l'ha de fer un electricista qualificat.
- Do not exceed the maximum electrical ratings of the device.
- Assegureu-vos una correcta connexió a terra per evitar riscos elèctrics.
- Mantingueu els nens allunyats dels aparells elèctrics.
3. Producte acabatview
The Intermatic MIL72ESTUZH-120 is a robust 24-hour electromechanical timer module designed for flush or panel mounting within a control panel. It is suitable for light-duty commercial applications requiring precise time control for 120 VAC single-phase circuits. Common uses include lighting, HVACR systems, pumps, motors, and general electrical circuit management.
Imatge: Frontal view of the Intermatic MIL72ESTUZH-120 timer. The device features a clear protective cover over a black dial. The dial displays a 24-hour format with AM/PM indicators and minute markings. A central clock mechanism with hour and minute hands indicates the current time. The outer edge of the dial contains captive trippers for setting ON/OFF periods. A manual override switch is visible on the right side of the dial.
Característiques principals:
- 21 A SPDT Switch: Provides reliable switching for various loads.
- Synchronous Drive with Self-Recharging Battery Backup: Ensures accurate timekeeping and operation during power outages.
- Captive Trippers: Allows for easy setting of 15-minute ON/OFF intervals.
- Anulació manual: Provides flexibility to temporarily bypass programmed settings.
- Disseny de muntatge encastat: Integrates seamlessly into control panels.
4. Especificacions
| Especificació | Detall |
|---|---|
| Número de model | MIL72ESTUZH-120 |
| Marca | Intermatic |
| Voltage | 120 V |
| Tipus de canvi | SPDT (Unipolar Doble Llançament) |
| Ampedat | 21 A |
| Cicle | 24 hores |
| Tipus de muntatge | Flush/Panel Mount |
| Còpia de seguretat de la bateria | Self-recharging Nickel Metal Hydride (non-replaceable) |
| Temps mínim d'encesa/apagada | 15 minutes (using captive trippers) |
| Material | Metall |
| Dimensions del producte | 30"D x 8"W x 6"H (Note: These dimensions appear to be for packaging or a larger assembly, actual timer module dimensions will be smaller for flush mounting.) |
| Pes de l'article | 4 unces |
5. Instal·lació
Abans de començar:
- Assegureu-vos que l'alimentació estigui DESCONNECTADA a l'interruptor principal.
- Comproveu que el volum de subministramenttage matches the timer's rating (120V AC).
- Have appropriate tools ready (screwdriver, wire strippers, etc.).
Muntatge:
- Select a suitable location within a control panel for flush mounting.
- Cut an appropriate opening in the panel according to the timer's dimensions.
- Insert the timer into the opening and secure it using the provided mounting hardware.
Cablejat:
Refer to the wiring diagram provided with the product packaging for specific connections. General wiring steps include:
- Connect the incoming 120V AC line wire to the designated terminal.
- Connecteu el cable neutre al terminal neutre.
- Connect the load wire(s) (e.g., to lights, motor) to the appropriate switched terminals (normally open or normally closed, depending on desired operation).
- Assegureu-vos que totes les connexions estiguin segures i aïllades.
After wiring, restore power and proceed to initial setup.
6. Funcionament
Configuració de l'hora actual:
- Rotate the entire dial clockwise until the current time aligns with the time indicator arrow (usually a small triangle or line on the stationary part of the timer housing).
- Ensure you distinguish between AM and PM hours on the 24-hour dial.
Setting ON/OFF Programs:
The timer uses captive trippers around the dial to set program times. Each tripper represents a 15-minute interval.
- To set an ON period, push the trippers outwards for the desired duration.
- To set an OFF period, leave the trippers in their inward position for the desired duration.
- The timer will activate the connected load when the dial rotates past an outward-pushed tripper and deactivate it when it rotates past an inward-pushed tripper.
Anulació manual:
The MIL72ESTUZH-120 features a manual override switch, typically a small lever or button, located on the timer face. This allows you to temporarily switch the load ON or OFF, overriding the programmed schedule without affecting future cycles.
- Move the override switch to the desired position (ON or OFF).
- El temporitzador reprendreà la seva programació en el següent esdeveniment d'encesa o apagada programat.
7. Manteniment
The Intermatic MIL72ESTUZH-120 is designed for minimal maintenance.
- Neteja: Netegeu periòdicament l'exterior del temporitzador amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
- Bateria: The unit contains a non-replaceable, self-recharging Nickel Metal Hydride battery for power outage carry-over. No user maintenance is required for the battery.
- Inspecció: Annually inspect the timer for any signs of damage, loose connections, or unusual operation. If any issues are found, disconnect power and consult a qualified electrician.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El temporitzador no s’executa | No power to the timer; Motor failure | Check circuit breaker/fuse; Verify wiring connections; Contact support if motor is faulty. |
| Load not turning ON/OFF at programmed times | Incorrect time setting; Trippers not set correctly; Manual override engaged | Adjust current time; Ensure trippers are pushed in/out as desired; Check manual override switch position. |
| Manual override not working | Switch mechanism faulty; Internal wiring issue | Ensure switch is fully engaged; Contact support if issue persists. |
| Timer making unusual noises | Problema mecànic intern | Disconnect power immediately; Contact support. |
9. Garantia i Suport
For warranty information and technical support, please refer to the documentation included with your product or visit the official Intermatic weblloc web. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.
Intermatic Customer Support:
- Weblloc: www.intermatic.com
- Contact information can typically be found in the 'Support' or 'Contact Us' section of their weblloc.
