Leviton 21254-HW 20A 125V Hospital Grade 4-in-1 Receptacle Instruction Manual

1. Producte acabatview

The Leviton 21254-HW is a 20 Amp, 125 Volt, Industrial Series Extra Heavy Duty Hospital Grade 4-in-1 Receptacle. Designed for demanding environments, this straight blade, grounding receptacle provides four outlets in a single unit, suitable for applications requiring high-abuse tolerance such as healthcare facilities, manufacturing plants, and schools. It features a durable nylon body and face, a 5-20R configuration, and is approved by UL 498, CSA C22.2, and ISO 9001 standards.

Figura 1: Frontal view of the Leviton 21254-HW 4-in-1 Receptacle, showing the four outlets and 'HOSPITAL GRADE' marking.

2. Informació de seguretat

ADVERTIMENT: To avoid fire, shock, or death, turn OFF power at the circuit breaker or fuse box and test that power is OFF before wiring. This device must be installed in accordance with all national and local electrical codes. If you are unsure about any part of these instructions, consult a qualified electrician.

• Always disconnect power before working on electrical circuits.
• Use only copper wire for connections.
• Assegureu-vos de posar a terra correctament per evitar descàrregues elèctriques.
• No excedeixi el vol especificattage i les classificacions actuals del dispositiu.
• Keep children away from electrical work.

3. Característiques del producte

• Construcció duradora: Interlocking thermoplastic nylon cover and body for enhanced resilience.
• High Performance Contacts: Extra heavy-duty, T-type triple-wipe bronze contacts ensure maximum electrical performance and longevity.
• Disseny versàtil: Accommodates up to four Fed Spec size straight or angled plugs simultaneously.
• Identificació clara: Easy-to-read voltage i amperage ratings are molded directly onto the face of the receptacle.
• Certificacions: UL 498, CSA C22.2, and ISO 9001 approved, ensuring compliance with safety and quality standards.

4. Configuració i instal·lació

Installation of the Leviton 21254-HW receptacle requires basic electrical knowledge. If you are not comfortable performing electrical work, please consult a licensed electrician.

Eines necessàries:

• Tornavís (Phillips i/o de punta plana)
• Pelafils
• Voltage Tester
• Cinta elèctrica (opcional)

Passos d'instal·lació:

1. Apagueu l'alimentació: Locate the circuit breaker or fuse that controls the outlet you are replacing or installing. Turn it OFF. Use a voltage tester to confirm that the power is completely off at the outlet.
2. Remove Old Receptacle (if applicable): Unscrew the wall plate and then the mounting screws holding the old receptacle in the electrical box. Carefully pull the old receptacle out of the box.
3. Identificar els cables: You will typically find three types of wires:
   • Black or Red (Hot/Line): Carries power.
   • Blanc (neutre): Completes the circuit.
   • Green or Bare Copper (Ground): Fil de seguretat.
4. Prepareu els cables: If necessary, strip approximately 1/2 inch of insulation from the end of each wire.
5. Connect Wires to New Receptacle:
   • Connecteu el Coure verd o nu (terra) cable a la Cargol de terra verd on the receptacle.
   • Connecteu el Blanc (neutre) cable a la Cargol de plata terminals.
   • Connecteu el Black or Red (Hot/Line) cable a la Cargol de llautó terminals.

   Ensure all connections are tight and secure. The receptacle is designed for 3-wire connections.
6. Receptacle de muntatge: Carefully push the wired receptacle back into the electrical box. Secure it with the mounting screws.
7. Instal·leu la placa de paret: Attach the decorative wall plate over the receptacle.
8. Restaura l'alimentació: Turn the circuit breaker or fuse back ON.
9. Prova: Plug a device into each of the four outlets to ensure proper function.

Figura 2: Esquena view of the Leviton 21254-HW Receptacle, illustrating the screw terminals for wiring connections (Ground, Neutral, Hot).

5. Instruccions de funcionament

The Leviton 21254-HW 4-in-1 Receptacle operates like any standard electrical outlet. Once properly installed and powered, it is ready for use.

1. Plug In Devices: Insert the plug of your electrical device into any of the four available outlets. The design allows for multiple plugs, including those with larger adapters, to be used simultaneously.
2. Encendre el dispositiu: Turn on your electrical device as usual.

Important: Do not overload the receptacle or the circuit it is connected to. Ensure the total current draw of all connected devices does not exceed the 20 Amp rating of the receptacle or the circuit breaker.

6. Manteniment

The Leviton 21254-HW receptacle is designed for durability and requires minimal maintenance.

• Neteja: To clean the receptacle, ensure power is OFF at the circuit breaker. Wipe the surface with a soft, damp tela. No utilitzeu netejadors abrasius ni dissolvents.
• Inspecció periòdica: Periodically inspect the receptacle for any signs of damage, such as cracks, discoloration, or loose connections. If any damage is observed, turn off power and replace the receptacle immediately.
• Tightness of Connections: If you suspect a loose connection, turn off power at the circuit breaker and carefully check the wire terminals for tightness.

7. Solució De Problemes

If you encounter issues with your Leviton 21254-HW receptacle, consider the following troubleshooting steps:

No Power at Receptacle:

• Comproveu l'interruptor: Verify that the circuit breaker controlling the receptacle is in the ON position. If it has tripped (moved to the OFF or middle position), reset it by pushing it firmly to OFF and then to ON.
• Prova altres punts de venda: Check if other outlets on the same circuit are working. If not, the issue is likely with the circuit breaker or wiring to the circuit.
• Inspeccioneu el cablejat: With power OFF at the breaker, carefully remove the wall plate and receptacle. Check that all wires are securely connected to their respective terminals (Hot to Brass, Neutral to Silver, Ground to Green). Ensure no wires are loose or frayed.
• Sobrecàrrega: Ensure the total load of devices plugged into the receptacle does not exceed 20 Amps. Unplug some devices and retest.

Loose Plug Connection:

• The Leviton 21254-HW features heavy-duty contacts designed for secure connections. If a plug feels loose, ensure it is fully inserted. If the issue persists with multiple plugs, the receptacle may be worn and require replacement.

Si els passos de resolució de problemes no resolen el problema, consulteu un electricista qualificat.

8. Especificacions

Figure 3: Product dimensions of the Leviton 21254-HW Receptacle.

9. Garantia i Suport

For warranty information and technical support regarding your Leviton 21254-HW receptacle, please refer to the official Leviton website or contact Leviton customer service directly. Warranty terms typically cover defects in materials and workmanship under normal use.

Leviton Customer Service: Per obtenir ajuda, visiteu el Leviton Store on Amazon o la seva empresa oficial weblloc.