1. Introducció
This manual provides comprehensive instructions for the installation, operation, and maintenance of your GROHE Surf WC Actuation Plate, model 37063000. Please read this manual thoroughly before beginning installation or use to ensure proper function and longevity of the product. This actuation plate is designed for vertical mounting and features a chrome-colored finish with push-button operation.
Imatge 1.1: Frontal view of the GROHE Surf WC Actuation Plate. This image displays the chrome-colored rectangular plate with a central circular push-button mechanism, featuring concentric wave-like patterns emanating from the center.
2. Instruccions de seguretat
- Always turn off the water supply before performing any installation or maintenance.
- Assegureu-vos que totes les connexions estiguin ben fixades per evitar fuites.
- Utilitzeu les eines adequades per a la instal·lació.
- Mantingueu les peces petites allunyades dels nens.
- Si no esteu segurs de cap pas, consulteu un professional qualificat.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents al paquet abans de començar la instal·lació:
- GROHE Surf WC Actuation Plate (Chrome)
- Marc de muntatge
- Fixing Set (screws, anchors)
- Manual d'instruccions
4. Guia d'instal·lació
The GROHE Surf WC Actuation Plate is designed for vertical wall installation. Follow these steps for proper mounting:
- Prepareu l'obertura a la paret: Ensure the wall opening for the concealed cistern is correctly sized and positioned according to the cistern manufacturer's instructions.
- Install the Mounting Frame: Secure the provided mounting frame to the wall using the fixing set. Ensure it is level and flush with the finished wall surface. The frame provides the necessary support and alignment for the actuation plate.
- Connecteu les varetes d'accionament: Attach the actuation rods from the plate to the corresponding levers on the cistern mechanism. Adjust the length of the rods as necessary to ensure proper engagement.
- Attach the Actuation Plate: Carefully align the GROHE Surf actuation plate with the mounting frame and press it firmly into place until it clicks securely. Ensure the plate sits flush against the wall.
Image 4.1: Technical drawing illustrating the dimensions of the GROHE Surf WC Actuation Plate. The front view shows a width of 156 mm and a height of 197 mm. The side view indicates a projection of 10 mm from the wall and a total depth of 18 mm including the mounting mechanism.
Image 4.2: Technical drawing showing a cross-section of a WC installation with the GROHE Surf Actuation Plate. It illustrates the recommended installation height for the plate relative to the toilet bowl, with key measurements for the cistern and actuation mechanism.
Image 4.3: The GROHE Surf WC Actuation Plate installed above a toilet in a tiled bathroom setting. The chrome finish of the plate complements the white tiles and fixtures, demonstrating its integrated appearance.
5. Instruccions de funcionament
The GROHE Surf WC Actuation Plate features a simple push-button operation for flushing. Depending on the cistern type, it may offer a single flush or a dual flush mechanism (not explicitly stated for this model, assume single flush unless dual flush is visible).
- To activate the flush, firmly press the central push-button on the actuation plate.
- Release the button once the flush is initiated.
Image 5.1: A hand demonstrating the push-button operation of the GROHE Surf WC Actuation Plate. The image shows a finger pressing the central circular button, highlighting the ease of use.
6. Cura i Manteniment
To maintain the appearance and functionality of your GROHE Surf WC Actuation Plate, follow these care instructions:
- Neteja: Clean the chrome surface regularly with a soft, damp cloth. For stubborn spots, use a mild, non-abrasive cleaner specifically designed for chrome finishes.
- Eviteu productes químics durs: Do not use abrasive cleaners, scouring pads, or cleaners containing ammonia, bleach, or acids, as these can damage the chrome finish and the ABS material.
- Assecat: After cleaning, wipe the plate dry with a soft, clean cloth to prevent water spots.
7. Solució De Problemes
If you encounter issues with your actuation plate, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Button does not actuate flush. | Actuation rods are not correctly connected or adjusted. | Remove the plate and check the connection and length of the actuation rods. Adjust as needed. |
| La placa està solta o inestable. | Mounting frame not securely fastened or plate not properly clipped in. | Ensure the mounting frame is firmly attached to the wall. Re-seat the actuation plate, ensuring it clicks into place. |
| Water continues to run after flushing. | Issue with the cistern's internal mechanism or actuation rods are too long, keeping the flush valve open. | Check the cistern mechanism. If actuation rods are too long, adjust them to ensure the flush valve fully closes. Consult a plumber if the issue persists. |
8. Especificacions tècniques
| Característica | Especificació |
|---|---|
| Número de model | 37063000 |
| Marca | GROHE |
| Color | Chrome |
| Material | Acrilonitril butadiè estirè (ABS) |
| Dimensions del producte (L x A x A) | 6.26 x 2.48 x 7.87 polzades (156 x 63 x 197 mm) |
| Pes de l'article | 0.32 quilograms (11.3 unces) |
| Mètode d'instal·lació | Wall-mounted, Vertical |
| Tipus d'operació | Pulsador |
| Components inclosos | Screw, Frame, Fixing set, Wall Plate |
9. Garantia i atenció al client
For information regarding the product warranty, please refer to the warranty documentation provided with your purchase or visit the official GROHE website. If you require technical assistance, spare parts, or have questions not covered in this manual, please contact GROHE customer support.
Podeu trobar més informació i dades de contacte a GROHE Store on Amazon.
