1. Producte acabatview
The TP-Link TL-SF1008P is an 8-Port 10/100Mbps Desktop Switch with 4 PoE+ Ports, designed to provide a seamless network connection. It integrates 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities. Four of the eight Auto-Negotiation RJ45 ports (Port 1 to Port 4) support Power over Ethernet (PoE+) functionality. These PoE+ ports can automatically detect and supply power to IEEE 802.3at/af compliant Powered Devices (PDs).
This switch allows for the transmission of electrical power along with data over a single cable, enabling network expansion in locations without readily available power lines or outlets. It is suitable for powering devices such as Access Points (APs), IP Cameras, or IP Phones.
Figura 1: Frontal view of the TP-Link TL-SF1008P PoE+ Switch.
2. Contingut del paquet
Comproveu que el vostre paquet contingui els elements següents:
- TL-SF1008P Switch
- Adaptador d'alimentació
- Cable d'alimentació
- Guia d'instal·lació
- Peus de goma
3. Configuració i instal·lació
The TL-SF1008P is designed for easy installation and use, requiring no software configuration. It features a plug-and-play design.
3.1 Instal·lació física
The switch can be placed on a desktop or mounted on a wall. Ensure adequate ventilation around the device.
Figure 2: Simple Plug and Play setup involves plugging in the power and connecting devices.
3.2 Connexió de dispositius
Connect your network devices (e.g., router, NVR, computers, printers, IP cameras, IP phones, access points) to the RJ45 ports on the switch. Ports 1-4 are PoE+ enabled.
Figura 3: Example application scenario showing the TL-SF1008P connecting various devices, including PoE-powered ones.
4. Modes de funcionament i característiques
The TL-SF1008P offers several features to optimize network performance and reliability.
4.1 Mode d'ampliació
Extend Mode allows for data and power PoE transmission over distances up to 250 meters, which is ideal for surveillance systems where devices may be located far from the switch. When Extend Mode is active, the port speed will be downgraded to 10 Mbps.
Figure 4: Comparison of standard 100m transmission and 250m Extend Mode transmission for IP cameras.
4.2 Mode de prioritat
The switch incorporates a priority function to protect the system when the total PoE power consumption exceeds the budget. If the power consumption of all PoE PDs is greater than or equal to 53W, a priority will be assigned among the PoE ports (Port 1 > Port 2 > Port 3 > Port 4). The system will then cut off power to the lowest-priority port to protect the system. This mode ensures high-quality transmission for critical applications like video or voice data.
4.3 Recuperació automàtica PoE
PoE Auto Recovery automatically detects and reboots unresponsive PoE-powered devices. This feature eliminates the need for manual monitoring or resetting, enhancing system reliability.
Figure 5: Diagram illustrating the PoE Auto Recovery function, which reboots unresponsive PoE devices.
5. Especificacions
| Característica | Descripció |
|---|---|
| Dimensions del producte | 294 x 180 x 44 mm (11.6 polzades de llargada x 7.1 polzades d'amplada x 1.7 polzades d'alçada) |
| Pes de l'article | 1.15 grams (0.041 unces) |
| Voltage | 48 Volts |
| Material de la caixa | Metall |
| Maximum Power (Switch) | 60.2 watts |
| Pressupost d'energia PoE | 66W (4 PoE+ Ports) |
| Max. Power per PoE+ Port | 30W |
| Classificació de temperatura superior | 40 graus centígrads |
| Tipus d'interfície | 8 10/100Mbps RJ45 Ports (AUTO Negotiation/AUTO MDI/MDIX) |
| Velocitat de transferència de dades | 100 megabits per segon |
| Valoració actual | 1.25 Amps |
| Número de model | TL-SF1008P |
| Dispositius compatibles | Camera, Printer, IP Phone, Access Point |
| Control de flux | IEEE 802.3X |
| Disseny sense ventiladors | Sí |
6. Manteniment
To ensure optimal performance and longevity of your TP-Link TL-SF1008P switch, consider the following maintenance guidelines:
- Condicions ambientals: Operate the switch within the specified temperature range (0°C to 40°C) and humidity levels. Avoid exposing the device to direct sunlight, excessive heat, or moisture.
- Neteja: Netegeu periòdicament l'exterior de l'interruptor amb un drap suau i sec. No utilitzeu netejadors líquids ni en aerosol. Assegureu-vos que les obertures de ventilació estiguin lliures de pols i obstruccions.
- Gestió de cables: Mantingueu els cables de xarxa organitzats i correctament fixats per evitar desconnexions o danys accidentals.
- Font d'alimentació: Use only the provided power adapter. Ensure the power connection is secure and stable.
7. Solució De Problemes
If you encounter issues with your TL-SF1008P switch, consider the following basic troubleshooting steps:
- Sense energia: Ensure the power adapter is securely connected to both the switch and a working power outlet. Check the power LED indicator on the switch.
- Sense enllaç/activitat: Verify that the Ethernet cables are correctly connected to both the switch and the connected device. Check the Link/Act LEDs for the respective ports. Try using a different Ethernet cable.
- El dispositiu PoE no s'encén: Confirm that the connected device is IEEE 802.3at/af compliant. Check the PoE Max LED on the switch; if it's red, the system power might be overloaded, and Priority Mode may be active. Ensure the total power consumption of all PoE devices does not exceed the 66W budget.
- Slow Connection in Extend Mode: This is expected behavior. When Extend Mode is active, the port speed is intentionally reduced to 10 Mbps to achieve longer transmission distances.
For more detailed troubleshooting or persistent issues, please refer to the support section.
8. Garantia i Suport
The TP-Link TL-SF1008P is backed by an industry-leading 3-year warranty.
8.1 Suport tècnic
L'assistència tècnica gratuïta està disponible de 6:00 a 18:00 PST, de dilluns a divendres.
For assistance, you can contact TP-Link support:
- Telèfon: (866) 225-8139
- Weblloc: els meus productes.tp-link.com/us
- Correu electrònic: suport.USA@tp-link.com
Figure 6: TP-Link contact information for support.
