1. Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your PAC SNI-50A Adjustable High Power 2-Channel Line Out Converter. The SNI-50A is designed to convert high-level (speaker-level) audio signals from a factory or aftermarket car stereo into low-level (RCA line-level) signals, allowing you to connect an aftermarket amplifier. This device ensures optimal sound quality and system compatibility.
2. Informació de seguretat
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov.
- Desconnecteu sempre la bateria del vehicle abans de començar qualsevol instal·lació elèctrica.
- Assegureu-vos que tot el cablejat estigui correctament aïllat i fixat per evitar curtcircuits i danys.
- Consulteu un instal·lador professional d'àudio per a cotxes si no teniu cap dubte sobre alguna part del procés d'instal·lació.
- No exposeu el dispositiu a la humitat ni a temperatures extremes.
3. Producte acabatview i Característiques
The PAC SNI-50A is a compact and efficient solution for integrating aftermarket amplifiers with factory audio systems. Its key features include:
- 2-Channel Adjustable Output: Provides two channels of adjustable low-level RCA output.
- High Power Input: Capable of handling up to 50 watts maximum input per channel from speaker-level signals.
- Linear Frequency Response: Delivers a linear 20 to 20,000Hz output, accurately reproducing the input signal.
- Transformer Isolated: Designed with transformer isolation for optimal sound quality and performance, minimizing noise.
- Correct Phasing: Maintains correct audio phasing for accurate sound reproduction.
Figure 1: The PAC SNI-50A Adjustable High Power 2-Channel Line Out Converter, showing its compact black casing, PAC logo, model number, speaker wire input harness, and two RCA output jacks.
4. Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet:
- PAC SNI-50A Adjustable High Power 2-Channel Line Out Converter
- Wiring harness (pre-attached)
5. Configuració i instal·lació
Una instal·lació correcta és crucial per a un rendiment òptim. Es recomana que la instal·lació la realitzi un professional qualificat.
5.1 Connexions de cablejat
- Identify Speaker Wires: Locate the left and right speaker output wires from your factory or aftermarket head unit. These are typically positive (+) and negative (-) pairs for each channel.
- Connect High-Level Input: Connect the corresponding speaker wires from your head unit to the input wires of the SNI-50A's wiring harness. Ensure correct polarity (positive to positive, negative to negative) for each channel. The SNI-50A typically uses color-coded wires for left and right channels.
- Connect RCA Output: Plug your RCA cables from the SNI-50A's RCA output jacks into the input jacks of your aftermarket ampmés viu.
- Posada a terra: While the SNI-50A is transformer isolated, a proper ground connection for the amplifier and head unit is essential for noise-free operation.
5.2 Muntatge
Mount the SNI-50A in a secure, dry location away from excessive heat or moisture. Ensure it is not exposed to direct sunlight or moving parts. Use screws or zip ties to secure the unit.
6. Instruccions de funcionament
The PAC SNI-50A is designed for straightforward operation once installed. Its primary function is to convert speaker-level signals to RCA line-level signals, which are then sent to an ampmés viu.
6.1 Adjusting Output Level
The SNI-50A features adjustable output levels. These adjustments are typically small potentiometers (screws) on the unit itself, allowing you to match the output signal strength to the input sensitivity of your amplifier. Use a small screwdriver to carefully turn the adjustment screws. Start with the adjustments at their minimum setting and gradually increase them until the desired volume and clarity are achieved without distortion.
- Turn the head unit volume to about 75% of its maximum.
- Adjust the SNI-50A's output level until the amplifier's input gain is set correctly (refer to your amplifier's manual for gain setting instructions).
- Avoid setting the output level too high, as this can introduce distortion.
7. Manteniment
The PAC SNI-50A requires minimal maintenance to ensure long-term performance.
- Neteja: Periodically wipe the unit with a soft, dry cloth to remove dust. Do not use liquid cleaners or solvents.
- Connexions: De tant en tant, comproveu totes les connexions del cablejat per assegurar-vos que estiguin ben fixades i que no presentin corrosió.
- Medi ambient: Ensure the unit remains in a dry, stable environment, protected from extreme temperatures and vibrations.
8. Solució De Problemes
If you experience issues with your SNI-50A, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Sense so ampmés viu |
|
|
| So distorsionat |
|
|
| Engine noise or hum |
|
|
9. Especificacions
| Model | SNI-50A |
| Canals | 2-Canals |
| Potència d'entrada màxima | 50 watts per canal |
| Resposta de freqüència | 20 Hz - 20,000 Hz |
| Aïllament | Transformador aïllat |
| Dimensions (L x A x A) | 7.5 x 6.15 x 1.8 polzades |
| Pes | 5.6 unces (0.35 lliures) |
10. Garantia i Suport
For warranty information and technical support, please refer to the official PAC weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Conserveu el rebut de compra com a comprovant de compra.
PAC Customer Support: Si us plau, visiteu pac-audio.com/support for the latest support resources, FAQs, and contact information.
