1. Producte acabatview
The Neumann TLM 102 is a compact large-diaphragm condenser microphone designed for studio applications. It features a cardioid polar pattern and is capable of handling high sound pressure levels, making it suitable for recording various sound sources, including vocals, speech, acoustic instruments, percussion, and amplifiers. The microphone incorporates a transformerless circuit for minimal self-noise and a clear, uncolored sound reproduction.
Key characteristics include a slight presence boost above 6 kHz, which enhances vocal clarity in a mix, and an exceptionally fast transient response for accurate capture of acoustic instruments. An integrated pop screen helps to suppress plosive sounds during vocal recordings. The microphone's capsule is elastically suspended to reduce handling and structure-borne noise.
Image 1: The Neumann TLM 102 Large-Diaphragm Condenser Microphone in satin nickel finish.
2. Configuració
To set up your Neumann TLM 102 microphone, follow these steps:
- Desempaquetar components: Carefully remove the TLM 102 microphone and the included stand mount from its packaging.
- Attach Stand Mount: Securely screw the stand mount onto a microphone stand. Ensure the stand is stable and capable of supporting the microphone's weight.
- Muntar el micròfon: Insert the TLM 102 into the stand mount. The microphone should fit snugly.
- Connecteu el cable XLR: Connect a standard 3-pin XLR microphone cable to the XLR output at the base of the TLM 102. Connect the other end of the XLR cable to an audio interface, mixer, or preamplifier that provides 48V phantom power.
- Activa l'energia fantasma: Ensure that 48V phantom power is activated on your audio interface, mixer, or preamplifier. The TLM 102 requires phantom power to operate.
Image 2: The Neumann TLM 102 microphone shown with an optional shock mount for enhanced isolation.
3. Instruccions de funcionament
The TLM 102 is a versatile microphone suitable for various recording scenarios. Consider the following for optimal performance:
- Col·locació del micròfon: Due to its cardioid polar pattern, the TLM 102 is most sensitive to sounds directly in front of it and rejects sounds from the sides and rear. Position the microphone with the Neumann logo facing the sound source.
- Efecte de proximitat: Like all directional microphones, the TLM 102 exhibits a proximity effect, where bass frequencies are accentuated when the microphone is close to the sound source. Experiment with distance to achieve the desired tonal balance.
- Guanyar Staging: Adjust the gain on your preamplifier to achieve a healthy signal level without clipping. The TLM 102 has a high maximum SPL (144 dB), allowing it to handle loud sources without distortion.
- Filtre pop: The integrated pop screen helps reduce plosives. For very close vocal work, an external pop filter may provide additional protection.
- Entorn de gravació: While the cardioid pattern offers some rejection of off-axis sound, recording in an acoustically treated environment will yield the best results.
Image 3: The TLM 102 microphone capturing the sound of an acoustic guitar.
Image 4: The TLM 102 microphone used for recording drums, demonstrating its high SPL capability.
4. Manteniment
Proper care will ensure the longevity and performance of your TLM 102 microphone:
- Neteja: Use a soft, dry cloth to wipe the microphone body. Avoid using liquid cleaners or solvents, as these can damage the finish or internal components. Do not attempt to clean the grille or capsule directly.
- Emmagatzematge: When not in use, store the microphone in its original packaging or a protective case to shield it from dust, moisture, and physical damage.
- Condicions ambientals: Avoid exposing the microphone to extreme temperatures, high humidity, or direct sunlight.
5. Solució De Problemes
If you encounter issues with your TLM 102, consider the following:
- Sense sortida de so:
- Ensure 48V phantom power is activated on your audio interface/preampmés viu.
- Check all XLR cable connections for proper seating and integrity.
- Verify that the input gain on your preamplifier is set appropriately.
- Test with a different XLR cable or input channel if available.
- So distorsionat:
- Reduce the input gain on your preamplifier. The microphone may be receiving too strong a signal.
- Ensure the sound source is not excessively loud for the microphone's capabilities (though the TLM 102 has a high SPL rating).
- Soroll/bruix excessiu:
- Comproveu si hi ha bucles de terra al vostre sistema d'àudio.
- Ensure all cables are properly shielded and not running parallel to power cables.
- Verify that the recording environment is free from electromagnetic interference.
6. Especificacions
| Característica | Especificació |
|---|---|
| Acoustical Operating Principle | Transductor de gradient de pressió |
| Patró direccional | Cardioide |
| Interval de freqüència | 20 Hz - 20 kHz |
| Sensitivity at 1 kHz into 1 kΩ | 11 mV/Pa |
| Impedància nominal | 50 Ω |
| Impedància de càrrega nominal | 1 kΩ |
| Equivalent Noise Level, CCIR | 21 dB |
| Equivalent Noise Level, A-weighted | 12 dB-A |
| Signal-to-Noise Ratio, CCIR (rel. 94 dB SPL) | 73 dB |
| Signal-to-Noise Ratio, A-weighted (rel. 94 dB SPL) | 82 dB |
| Maximum SPL for THD 0.5% | 144 dB |
| Volum de sortida màximtage | 13 dBu |
| Subministrament Voltage (P48, IEC 61938) | 48V ± 4V |
| Current Consumption (P48, IEC 61938) | 3.5 mA |
| Matching Connectors | XLR 3F |
| Pes | Aprox. 210 g (0.46 lliures) |
| Diàmetre | 52 mm |
| Longitud | 116 mm |
| Material | Alumini |
| Color | Níquel setinat |
| Número de model | 008626 |
| UPC | 615104086265 |
7. Què hi ha a la caixa
The Neumann TLM 102 package includes:
- Neumann TLM 102 Large-Diaphragm Condenser Microphone
- Muntatge de peu
8. Garantia i Suport
For warranty information, technical support, or service inquiries, please contact Neumann customer service or visit the official Neumann weblloc web. Conserveu el comprovant de compra per a reclamacions de garantia.
Official Neumann Weblloc: Www.neumann.com
