SEM Presidio Interior Paint Aerosol (Model 15163) Instruction Manual

Introducció

This manual provides detailed instructions for the safe and effective use of the SEM Presidio Interior Paint Aerosol, Model 15163. This product is designed for coating interior surfaces such as metal, plastic, and vinyl, offering a matte finish. Please read all instructions carefully before use.

SEM Presidio Interior Paint Aerosol can and color swatch

Image: SEM Presidio Interior Paint Aerosol can, 12 oz, with a black color swatch. The label indicates "COLOR COAT Flexible Coating" and model number 15163.

Informació de seguretat

ADVERTIMENT: This product is an extremely flammable aerosol. Contents under pressure. Vapors may cause flash fire. Harmful if swallowed. Vapors harmful. Causes serious eye irritation. Causes skin irritation. Read all cautions on the back panel of the can before use.

Utilitzeu-ho en una zona ben ventilada.
Mantenir allunyat de la calor, espurnes, flames obertes i superfícies calentes. No fumar.
No punxeu ni incinereu el recipient.
Do not expose to temperatures exceeding 120°F (49°C).
Utilitzeu equips de protecció individual adequats, inclosos guants i protecció ocular.
Avoid breathing vapors or spray mist.
Mantenir fora de l'abast dels nens.
Eliminar el contingut/envàs d'acord amb la normativa local.

Advertència de la proposta 65: Aquest producte pot contenir productes químics coneguts a l’Estat de Califòrnia per causar càncer i defectes congènits o altres danys reproductius.

Muntatge i preparació

Neteja de superfícies: Thoroughly clean the surface to be painted with a suitable wax and grease remover. Ensure the surface is free of dirt, oil, wax, and other contaminants.
Preparació de la superfície: For optimal adhesion, lightly abrade smooth surfaces with fine-grit sandpaper (e.g., 400-600 grit wet/dry) or a scuff pad. Re-clean the abraded surface to remove any dust.
Emmascarament: Mask off any areas not intended for painting using painter's tape and masking paper or plastic.
Condicions ambientals: Ensure the application area is well-ventilated. Apply paint in a temperature range of 50°F to 85°F (10°C to 29°C) and moderate humidity. Avoid direct sunlight or extremely humid conditions.
Spray de prova: Always perform a test spray on an inconspicuous area or a test panel to verify color match and adhesion before applying to the main surface.

Instruccions d'ús (aplicació)

Agitar la llauna: Shake the aerosol can vigorously for at least one minute after the mixing ball begins to rattle. Continue to shake occasionally during application.
Tècnica d'aplicació: Hold the can approximately 8-10 inches (20-25 cm) from the surface. Apply light, even coats using a steady, sweeping motion. Overlap each pass slightly for uniform coverage.
Capes múltiples: Apply 2-3 light coats to achieve desired color and coverage. Allow sufficient flash-off time between coats (typically 5-10 minutes, or until the surface is tacky but not wet).
Temps d'assecat: The paint will be dry to the touch within an hour. For full cure and maximum durability, allow 24 hours. Avoid handling or exposing the painted surface to moisture during the curing process.

Manteniment i emmagatzematge

Can Clean-up: After each use, invert the can and spray for a few seconds until only clear propellant comes out. This prevents the nozzle from clogging. Wipe the nozzle clean.
Emmagatzematge: Store the aerosol can in a cool, dry place between 50°F and 85°F (10°C and 29°C). Do not store in direct sunlight or where temperatures may exceed 120°F (49°C).
Eliminació: Dispose of empty cans or unused product according to local hazardous waste regulations.

Resolució de problemes

Problema	Causa possible	Solució
Uneven Coverage / Streaks	Improper shaking, inconsistent spray distance, too thick coats.	Shake can thoroughly. Maintain consistent 8-10 inch distance. Apply multiple light coats.
Mala adherència	Inadequate surface cleaning or preparation.	Ensure surface is clean and free of contaminants. Lightly abrade smooth surfaces.
Obstrucció del broquet	Paint dried in nozzle.	Invert can and spray until clear propellant appears after each use. If clogged, try soaking nozzle in mineral spirits.
Drips or Runs	Applying too much paint in one coat, holding can too close.	Apply thinner coats. Increase spray distance to 8-10 inches.

Especificacions del producte

Marca: SEM
Nom del model: Presidio
Número de peça: 15163
Color: Black (Presidio)
Tipus d'acabat: Mat
Formulari de l'article: Aerosol
Volum de l'article: 12 Fluid Ounces (340g)
Usos específics: Superfícies interiors
Recomanació de superfície: Metal, Plastic, Vinyl
Característiques especials: Fade Resistant, Low VOC
Cobertura: Alt
Dry Time (Touch): Aproximadament 1 hora
Temps de curació completa: 24 hores
Nivell de resistència a l'aigua: No resistent a l'aigua
Pes de l'article: 1 lliures
Dimensions del paquet: 8.11 x 2.56 x 2.56 polzades

Informació de la garantia

No specific warranty information is provided in the product details. For details regarding product warranty, please contact SEM directly or refer to their official weblloc.

Atenció al client

For technical assistance, product inquiries, or safety data sheets, please contact the manufacturer:

Fabricant: SEM

Please visit the official SEM website for contact information and further resources.

	SEM Plastic Repair and Refinishing Procedures: A Comprehensive Guide This guide from SEM provides detailed procedures for repairing and refinishing automotive plastic parts, including fenders, bumpers, dashboards, and trim. It covers identifying plastic types (flexible, rigid, extra-rigid) and outlines step-by-step instructions using SEM's range of repair materials, primers, and coatings. Includes product lists and standard operating procedures.
	SEM Chip Guards: Automotive Paint Protection and Texture Coating Guide A comprehensive guide to SEM Chip Guards, detailing their benefits for protecting automotive panels from impact, chipping, and abrasion. Includes application instructions, standard operating procedures, and a detailed product list of related SEM automotive refinishing products.
	SEM636D Wheel Loader Operation and Maintenance Manual This comprehensive manual provides essential guidance for the safe and efficient operation, maintenance, and troubleshooting of the SEM636D Wheel Loader. It covers detailed safety information, technical specifications, operational procedures, and maintenance schedules to ensure optimal performance and longevity of the equipment.
	Especificacions tècniques de la carregadora de rodes SEM 650B Exploreu les especificacions tècniques detallades de la carregadora de rodes SEM 650B, incloent-hi el rendiment del motor, el sistema hidràulic, la transmissió, les dimensions i les capacitats. Fabricat per Shandong SEM Machinery Co., Ltd.
	Carregadora de rodes SEM 636D: especificacions, característiques i aplicacions Descobreix la carregadora de rodes SEM 636D, una màquina robusta i versàtil de la marca SEM de Caterpillar. Coneix les seves especificacions clau, el seu sistema hidràulic eficient, el seu sistema de transmissió fiable i la seva àmplia gamma d'aplicacions.
	SEM518 Compactor Technical Specifications Detailed technical specifications for the SEM518 compactor, including engine power, operating weight, dimensions, travel speed, and vibratory system data.

SEM 15163