Introducció
This user manual provides essential information for the safe and efficient operation of your Truma Ultraflow Pump Assembly 800mm. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
Producte acabatview
The Truma Ultraflow Pump Assembly is designed to facilitate the pumping of fresh water into your caravan or motorhome from an external water container such as an Aquaroll or Waterhog. It features a robust pump integrated into a flexible hose with a trigger-type connection for easy attachment to compatible Truma Ultraflow housings.
Figura 1: Truma Ultraflow Pump Assembly. This image shows the complete pump assembly, including the blue flexible hose, the submersible pump unit at one end, and the white trigger-type connector with the Truma logo at the other end. The pump unit is designed to be submerged in an external water container, while the connector attaches to the vehicle's water inlet.
Característiques principals:
- Connects with your Aquaroll or Waterhog for external water supply.
- Compatible with both the Truma Ultraflow Filter Housing and the Ultraflow Compact Housing.
- Total length of 900mm for flexible positioning.
- Trigger-type connection for secure and easy attachment.
Configuració i instal·lació
- Prepare Water Container: Ensure your external water container (e.g., Aquaroll, Waterhog) is filled with clean fresh water.
- Connexió al vehicle: Locate the Truma Ultraflow inlet on your caravan or motorhome. Insert the white trigger-type connector of the pump assembly into the inlet. Push firmly until it clicks into place, ensuring a secure connection.
- Bomba submergida: Place the submersible pump end of the assembly into the external water container. Ensure the pump is fully submerged in water before activating. Important: Do not run the pump out of water as this may cause damage.
- Comproveu les connexions: Verify all connections are secure and there are no visible leaks.
Instruccions de funcionament
Once the Truma Ultraflow Pump Assembly is correctly installed and the pump is submerged:
- Activate Water Pump: Turn on the internal water pump switch inside your caravan or motorhome. This will activate the Truma Ultraflow pump.
- Fill System: Open a tap inside your vehicle to allow water to flow through the system. Air may initially be expelled from the tap before a steady stream of water appears.
- Monitor del nivell d'aigua: Regularly check the water level in your external container to prevent the pump from running dry.
- Deactivate Pump: When you have finished drawing water, turn off the internal water pump switch.
Manteniment
Regular maintenance ensures the longevity and efficient operation of your Truma Ultraflow Pump Assembly:
- Neteja: Periodically clean the pump and hose with fresh water. Avoid using harsh chemicals that could damage the components.
- Hivernització: Before winter storage, ensure all water is drained from the pump assembly and the vehicle's water system to prevent freezing damage.
- Emmagatzematge: Store the pump assembly in a clean, dry place away from direct sunlight and extreme temperatures when not in use.
- Inspecció: Before each use, inspect the hose for kinks, cracks, or damage. Check the electrical connections for corrosion or wear.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La bomba no funciona | No power to pump; loose connection; faulty pump. | Check vehicle's internal pump switch and fuses. Ensure connections are secure. If problem persists, pump may need replacement. |
| Sense flux d'aigua o baixa pressió | Pump not submerged; air in system; kinked hose; low water level in container. | Ensure pump is fully submerged. Bleed air from taps. Straighten hose. Refill water container. |
| Fuita d'aigua per la connexió | Connection not secure; damaged O-rings. | Ensure trigger-type connector is fully engaged and clicked into place. Inspect and replace O-rings if damaged. |
Especificacions
| Atribut | Detall |
|---|---|
| Marca | Truma |
| Número de model | 46040-01 |
| Longitud total | 900 mm |
| Compatibilitat | Truma Ultraflow Filter Housing, Ultraflow Compact Housing, Aquaroll, Waterhog |
| Fabricant | Miriad |
| Dimensions del paquet | 32 x 15.2 x 6.8 cm |
| Pes de l'article | 400 g |
Garantia i Suport
For warranty information or technical support regarding your Truma Ultraflow Pump Assembly, please refer to the documentation provided with your purchase or contact Truma customer service directly. Keep your proof of purchase for warranty claims.
While specific warranty details are not provided in this manual, Truma products typically come with a manufacturer's warranty covering defects in materials and workmanship under normal use. Please consult the official Truma website or your local dealer for the most current warranty terms and conditions.
