Promate Swift Frameless Dive Mask User Manual

1. Introducció

The Promate Swift Frameless Dive Mask (Model MK100) is designed for divers and snorkelers seeking a low-profile, comfortable, and wide-view mask. Its frameless construction bonds a high-grade silicone skirt directly to a single tempered glass lens, ensuring durability and a streamlined design. This manual provides essential information for proper use, care, and maintenance of your dive mask.

2. Característiques del producte

• Disseny sense marc: Offers a low-profile and wide field of vision.
• High-Grade Silicone Skirt: Provides a comfortable and secure seal against the face, minimizing water entry.
• Single Tempered Glass Lens: Ensures clear, unobstructed underwater viewing and enhanced safety.
• Low Internal Volume: Facilitates effortless mask clearing.
• Quick-Adjust Strap Buckles: Integrated into the skirt for easy and precise strap adjustments.
• Wide Split Mask Strap: Designed for comfort and even tension distribution, contributing to a reliable seal.

Figura 2.1: Frontal view of the Promate Swift Frameless Dive Mask, showcasing its single tempered glass lens and black silicone skirt.

Figure 2.2: Two color variants of the Promate Swift Frameless Dive Mask, illustrating the clear and black silicone options.

3. Setup & Fitting

Proper mask fitting is crucial for comfort and to prevent water leakage. Follow these steps to ensure a secure fit:

1. Col·locació inicial: Hold the mask gently against your face without using the strap. Ensure the silicone skirt rests evenly around your face, covering your eyes and nose.
2. Vacuum Test: Inhale gently through your nose. The mask should create a slight vacuum and stay in place on your face without you holding it. If it falls off, the mask may not be suitable for your face shape, or there might be hair obstructing the seal.
3. Ajust de la corretja: Once a good seal is achieved, place the strap over the back of your head. Adjust the quick-adjust buckles on both sides until the strap is snug, but not overly tight. Overtightening can cause discomfort and may lead to leaks.
4. Hair Clearance: Ensure no hair is caught under the silicone skirt, as this will break the seal and cause leaks.
5. Nose Pocket: Confirm that the nose pocket allows for easy access to pinch your nose for equalization.

It is highly recommended to try on a dive mask in person to ensure it perfectly fits your unique face shape, forehead, eyes, and nose for optimal performance and comfort.

4. Instruccions de funcionament

Before your first dive or snorkel, it is recommended to prepare your mask to prevent fogging:

• Anti-Fog Treatment: Apply a small amount of commercial anti-fog solution or a mild, non-abrasive toothpaste (not gel) to the inside of the lens. Gently rub it in, then rinse thoroughly with fresh water. This removes manufacturing residues and creates a film that reduces fogging.

Durant l'ús:

• Mask Clearing: If water enters the mask, tilt your head slightly upwards, press the top of the mask firmly against your forehead, and exhale slowly through your nose. The exhaled air will push the water out from the bottom of the skirt.
• Igualació: As you descend, pressure builds on your mask. To equalize, gently exhale a small amount of air through your nose into the mask. This prevents mask squeeze and discomfort.

5. Manteniment i cura

Proper care extends the life of your Promate Swift Dive Mask:

• Esbandida: After each use, thoroughly rinse your mask with fresh, clean water to remove salt, chlorine, and sand.
• Neteja: For deeper cleaning, use a mild soap and water solution. Avoid harsh chemicals, abrasive cleaners, or solvents, as these can damage the silicone skirt and lens.
• Assecat: Allow the mask to air dry completely in a shaded area before storing. Avoid direct sunlight, which can degrade the silicone over time.
• Emmagatzematge: Store your mask in a cool, dry place, preferably in a protective mask box or bag, away from direct sunlight, heat, and sharp objects. This prevents scratches to the lens and deformation of the skirt.

6. Solució De Problemes

• Mask Fogging: If your mask fogs up, ensure you have performed the initial anti-fog treatment. Reapply anti-fog solution as needed. Avoid touching the inside of the lens with your fingers, as oils can contribute to fogging.
• Mask Leaking: Check for proper fit (refer to Section 3). Ensure no hair is trapped under the skirt. Adjust the strap for a snug, but not overly tight, fit. Inspect the silicone skirt for any tears or damage.
• Malestar: If the mask feels uncomfortable, loosen the strap slightly. Ensure the skirt is not pressing too hard on any part of your face. A different mask shape might be necessary if discomfort persists.

7. Especificacions

8. Garantia i assistència

For warranty information, product support, or to inquire about replacement parts, please contact Promate customer service directly. Refer to the product packaging or the official Promate weblloc web per obtenir les dades de contacte més actualitzades.