Introducció
Thank you for choosing the Mount-It! Full-Motion TV Wall Mount. This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your new TV wall mount. Designed for 23" to 42" flat screen panels with VESA patterns up to 200x200 and a maximum weight capacity of 66 lbs, this mount offers full articulation for optimal viewing angles. Please read this manual thoroughly before installation and keep it for future reference.
Image: The Mount-It! Full-Motion TV Wall Mount, showcasing its articulating design and VESA plate.
Informació de seguretat
ADVERTIMENT: Failure to read and follow all instructions may result in personal injury, property damage, or voiding of warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact a qualified installer or Mount-It! customer support.
- Do not install this product on walls that are not structurally sound. Ensure the mounting surface can safely support the combined weight of the mount and the display.
- This mount is designed for installation into a single wood stud. Do not install into drywall alone.
- No supereu la capacitat màxima de pes de 66 lliures (30 kg).
- Ensure the VESA mounting pattern of your TV is compatible with this mount (75x75mm, 100x100mm, 200x100mm, 200x200mm).
- Always use two people for lifting and positioning the TV during installation.
- Check all connections and fasteners periodically to ensure they remain secure.
Contingut del paquet
Please verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact Mount-It! customer support.
- Muntatge de la placa de paret
- TV Plate Assembly
- Kit de ferreteria de muntatge (diversos cargols, volanderes, separadors per a TV i fixació a la paret)
- Manual d'instruccions
Imatge: Una imatge detallada view of the mount with key components labeled, including the easy-grip tilt locking knob and removable TV plate.
Configuració i instal·lació
Eines necessàries (no incloses)
- Cercador de perns
- Llapis
- Trepant
- 5/32" (4mm) Drill Bit (for wood studs)
- Nivell
- Tornavís Phillips
- Clau anglesa o clau anglesa ajustable
Instal·lació pas a pas
- Locate a Wood Stud: Use a stud finder to locate the center of a wood stud at your desired mounting height. Mark the center of the stud with a pencil.
- Col·locació de la placa de paret: Hold the wall plate assembly against the wall, aligning the center hole with your marked stud center. Use a level to ensure the mount is perfectly horizontal. Mark the two mounting holes.
- Perforar forats pilot: Using a drill with a 5/32" (4mm) drill bit, drill pilot holes at the marked locations. Drill to a depth of approximately 2.5 inches (65mm).
- Fixeu la placa de paret: Secure the wall plate assembly to the wall using the provided lag bolts and washers. Tighten the bolts firmly with a socket wrench, but do not overtighten.
- Attach TV Plate to TV: Carefully place your TV face down on a soft, clean surface. Identify the VESA mounting holes on the back of your TV. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's VESA pattern. Attach the TV plate assembly to the back of your TV. Ensure the plate is centered and securely fastened.
- Muntar el televisor a la placa de paret: With assistance, carefully lift the TV with the attached TV plate. Align the TV plate with the wall plate assembly and slide it into place. Ensure the TV plate is securely seated on the wall plate.
- Fixar el televisor al muntatge: Once the TV is on the mount, use the provided security screws or locking mechanism (if applicable) to prevent accidental dislodgement. Refer to the specific diagram in your hardware kit for this step.
Image: The Mount-It! TV mount securely attached to the back of a flat-screen television, ready for wall installation.
Funcionament i ajustos
Your Mount-It! Full-Motion TV Wall Mount allows for various adjustments to achieve the perfect viewangle de ing.
Ajust d'inclinació
The mount allows for a tilt range of up to 30 degrees total (15 degrees up and 15 degrees down). To adjust the tilt, loosen the easy-grip tilt locking knob located on the mount. Adjust the TV to your desired vertical angle, then firmly tighten the knob to secure the position.
Image: A visual representation demonstrating the 15-degree upward and 15-degree downward tilt capabilities of the mount.
Ajust giratori
The mount allows for left and right swivel of up to 60 degrees total. Gently push or pull the TV to the desired horizontal angle. The articulating arm will allow smooth movement. No locking mechanism is typically needed for swivel, as the friction holds the position.
Extension and Retraction
The mount can extend your TV up to 6 inches from the wall and retract to a minimum distance of 3.25 inches from the wall. To adjust the distance, gently pull the TV away from the wall or push it back towards the wall. The articulating arm will move smoothly.
Image: A side-view diagram illustrating how the TV mount extends up to 6 inches from the wall and retracts to 3.25 inches.
Manteniment
Un manteniment regular garanteix la longevitat i el funcionament segur del suport de paret per a televisors.
- Neteja: Feu servir un drap suau i sec per netejar el suport. Eviteu productes de neteja abrasius o dissolvents que puguin danyar l'acabat.
- Comprovació de fixació: Periodically (e.g., every 6 months) check all screws and bolts to ensure they are tight and secure. Loose fasteners can compromise the mount's stability.
- Comprovació de moviment: Test the tilt, swivel, and extension movements to ensure they remain smooth. If movement becomes stiff, a small amount of silicone-based lubricant can be applied to the pivot points, avoiding contact with the TV.
Resolució de problemes
If you encounter any issues with your Mount-It! TV wall mount, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| Mount feels unstable or wobbly | Loose wall plate bolts; Incorrect stud installation; Exceeded weight capacity. | Ensure lag bolts are securely tightened into a wood stud. Verify TV weight is within 66 lbs limit. Re-install if necessary. |
| El televisor no està anivellat | Placa de paret no anivellada durant la instal·lació. | Carefully loosen wall plate bolts slightly, adjust with a level, and re-tighten. Some mounts have a post-installation leveling adjustment; check your specific model. |
| Difficulty tilting TV | Tilt locking knob is too tight. | Loosen the easy-grip tilt locking knob before attempting to adjust the tilt. Tighten firmly after adjustment. |
| Mounting screws don't fit TV | S'ha seleccionat una mida o un tipus de cargol incorrecte. | Refer to your TV's manual for correct VESA screw size. Use the appropriate screws, washers, and spacers from the provided hardware kit. |
Especificacions
| Característica | Detall |
|---|---|
| Número de model | MI-601 |
| Mides de TV compatibles | 23" to 42" (up to some 50" TVs) |
| Capacitat màxima de pes | 66 lliures (30 kg) |
| Compatibilitat VESA | 75x75mm, 100x100mm, 200x100mm, 200x200mm |
| Angle d'inclinació | Up to 15° up / 15° down (30° total) |
| Angle de gir | Up to 60° left / 60° right (120° total) |
| Extensió des de la paret | 3.25" (retret) a 6" (estès) |
| Material | Acer d'aliatge |
| Dimensions del producte | 9.4 x 4 x 9 polzades |
| Pes de l'article | 2.23 lliures |
Image: A diagram illustrating the VESA compliant sizes supported by the mount, including 75x75mm, 100x100mm, 200x100mm, and 200x200mm, along with the 66 lbs capacity.
Image: A diagram showing the physical dimensions of the Mount-It! TV mount, including the wall plate and TV plate measurements.
Garantia i assistència al client
Mount-It! products are designed for durability and performance. For warranty information or technical assistance, please contact Mount-It! customer support. Our US-based customer support team is available to assist with any questions or concerns regarding installation or product functionality.
Visit the official Mount-It! weblloc web per obtenir els recursos de suport i la informació de contacte més actualitzats.
Image: A graphic highlighting Mount-It!'s brand presence and customer satisfaction, stating 'Over 10 Million Users Since 2006'.
