SEM 15883 Medium Neutral Color Coat Instruction Manual

1. Introducció

The SEM Color Coat is a specialized elastomeric coating designed to restore or change the color of various surfaces. It is suitable for most vinyl surfaces, flexible and rigid plastics, carpet, and velour. This product is a fade-resistant, flexible, and permanent coating, not a dye.

2. Informació de seguretat

This product is an extremely flammable aerosol. It is crucial to read and understand all safety warnings before use. Failure to follow these instructions may result in serious injury or property damage.

• Inflamabilitat: Extremely flammable aerosol. Keep away from heat, sparks, open flames, and hot surfaces. Do not smoke during use.
• Contenidor pressuritzat: May burst if heated. Do not pierce or burn, even after use.
• Inhalation Hazard: Vapour is harmful. Use only outdoors or in a well-ventilated area. Avoid breathing dust, fume, gas, mist, vapours, or spray.
• Skin and Eye Irritation: Causes serious eye irritation and skin irritation. Wear protective gloves, protective clothing, eye protection, and face protection.
• Perill d'ingestió: Harmful or fatal if swallowed. If swallowed, immediately call a POISON CENTER or doctor. Do NOT induce vomiting.
• Riscos per a la salut: May cause genetic defects, cancer, or damage to fertility or the unborn child. May cause damage to organs through prolonged or repeated exposure.
• Emmagatzematge: Keep container tightly closed. Store in a well-ventilated place. Keep cool. Protect from sunlight. Do not expose to temperatures exceeding 50 °C (122 °F).
• Eliminació: Dispose of contents and container to an approved waste disposal plant.
• Primers auxilis: In case of contact with skin or eyes, rinse cautiously with water for several minutes. Remove contact lenses if present. If inhaled, move to fresh air. Seek medical attention if irritation persists or if swallowed.
• Nens: Mantenir fora de l'abast dels nens.

Image: Back of the SEM Color Coat can, displaying comprehensive safety warnings and usage precautions in various languages.

3. Producte acabatview

SEM Color Coat is specifically formulated to provide a durable, flexible, and permanent finish that resists fading. It is ideal for restoring the appearance of automotive interiors, marine upholstery, and other items made from vinyl, plastic, carpet, or velour. The Medium Neutral shade (Model 15883) offers a specific color match for various applications.

Imatge: Frontal view of the SEM 15883 Medium Neutral Color Coat aerosol can, highlighting the product name and color code.

4. Configuració i preparació

4.1 Preparació de la superfície

Proper surface preparation is critical for optimal adhesion and finish quality. All surfaces must be clean, dry, and free of grease, oil, wax, dirt, and other contaminants. Use a suitable cleaner and degreaser specifically designed for the material being coated (e.g., vinyl, plastic, fabric). For best results, lightly scuff rigid plastic or vinyl surfaces with a fine abrasive pad to promote adhesion, then clean thoroughly.

4.2 Enmascarament

Mask off any areas not intended for coating using painter's tape and masking paper or plastic sheeting. Ensure edges are sealed to prevent overspray.

4.3 Condicions ambientals

Apply in a well-ventilated area, preferably outdoors or in a spray booth. Optimal application temperature is between 65°F (18°C) and 90°F (32°C). Avoid applying in direct sunlight, high humidity, or windy conditions, which can affect drying time and finish quality.

5. Instruccions d'ús (aplicació)

1. Agitar la llauna: Shake the aerosol can vigorously for at least one minute after the mixing ball begins to rattle. Continue to shake periodically during application.
2. Spray de prova: Before applying to the actual surface, test the spray pattern and color on an inconspicuous area or a similar scrap piece of material.
3. Application Distance: Hold the can approximately 8-10 inches (20-25 cm) from the surface.
4. Apply Thin Coats: Apply several thin, even coats rather than one heavy coat. Overlap each pass by about 50%. Applying too much product at once can lead to drips, runs, and an uneven finish.
5. Drying Time Between Coats: Allow 5-10 minutes flash time between coats. The surface should feel tacky but not wet.
6. Nombre de capes: Typically, 2-3 light coats are sufficient to achieve full coverage and desired color. Additional coats may be applied if necessary, allowing proper flash time between each.
7. Temps de curació completa: The coating will be dry to the touch in approximately 30 minutes, but full cure can take up to 24 hours. Avoid heavy use or exposure to moisture during the initial cure period.
8. Neteja: After use, invert the can and spray for a few seconds to clear the nozzle, preventing clogs for future use.

6. Manteniment

Once fully cured, surfaces coated with SEM Color Coat can be cleaned with mild automotive interior cleaners. Avoid harsh chemicals, abrasive cleaners, or stiff brushes, as these may damage the finish. Regular cleaning with a soft cloth and appropriate cleaner will help maintain the appearance of the coated surface.

7. Solució De Problemes

• Uneven Finish/Mottling: This can be caused by inconsistent spray distance, insufficient shaking, or applying coats too heavily. Ensure consistent distance, shake the can well, and apply thin, even coats.
• Drips/Runs: Occurs when too much product is applied in one area or coats are too thick. Apply lighter, more numerous coats, allowing proper flash time between each.
• Mala adherència: Usually due to inadequate surface preparation. Ensure the surface is thoroughly cleaned, degreased, and properly scuffed if necessary. Avoid applying over silicone-based products.
• Rough Texture: Can result from spraying too far from the surface, allowing the paint to dry slightly before reaching the substrate, or applying in dusty conditions. Maintain proper spray distance and ensure a clean environment.
• Color Mismatch: While SEM Color Coat is designed for specific color matching, slight variations can occur due to underlying material color or application technique. Always test on an inconspicuous area first.

8. Especificacions del producte

Image: SEM Color Coat can illustrating its approximate dimensions, showing a height of 8.3 inches (20 cm).

9. Garantia i Suport

Specific warranty information for the SEM 15883 Medium Neutral Color Coat is not provided within this document. For detailed warranty terms, technical support, or further product inquiries, please contact SEM Products, Inc. directly through their official weblloc o canals d'atenció al client.