Introducció
The FLIR i7 Compact Infrared Thermal Imaging Camera is a non-invasive monitoring and diagnostic tool designed to detect temperature variations. It is suitable for identifying potential electrical and mechanical failures, insulation issues, and moisture problems. Its compact size and intuitive operation make it an accessible tool for various applications, from home inspections to industrial maintenance.
Característiques clau
- Pocket-sized and fully automatic design for ease of use.
- High thermal sensitivity of 0.1°C for precise problem detection.
- Focus-free lens for convenient viewing.
- High-resolution 2.8-inch color LCD screen.
- Multiple measurement modes: Spot (center), area (min/max), and isotherm (above/below).
- Storage capacity for up to 5,000 radiometric JPEG images on a 512 MB microSD card.
- Rechargeable lithium-ion battery providing over four hours of continuous use.
- Rugged, double-molded design meeting IP43 dust/splash proof standards.
- Includes QuickReport PC software for image analysis and report generation.
Configuració
Desembalatge i inspecció inicial
Carefully unpack all components from the hard carrying case. Verify that all items listed in the "What's in the Box" section are present and undamaged.
Figure 1: FLIR i7 camera and accessories neatly packed in its protective hard carrying case.
Carregant la bateria
Before first use, fully charge the included lithium-ion battery. The charger can be plugged directly into the camera for convenience. A full charge provides over four hours of operation.
Inserció de la targeta MicroSD
Locate the microSD card slot, typically protected by a rubber flap. Insert the provided 512 MB microSD card into the slot until it clicks into place. This card is essential for saving images.
Instruccions de funcionament
Encès/Apagat
Press and hold the power button (usually located near the display) to turn the camera on or off. The camera will perform a brief self-check upon startup.
Figura 2: Frontal view of the FLIR i7 camera with its display showing a thermal image.
Basic Operation and Display
The FLIR i7 features intuitive one-handed operation. Point the camera towards the area of interest. The 2.8-inch LCD color screen will display the thermal image in real-time. The camera has a focus-free lens, simplifying operation.
Figura 3: lateral view of the FLIR i7, highlighting its ergonomic design.
Modes de mesura
The camera offers three primary display measurement modes:
- Spot (center): Mostra la temperatura al centre de la pantalla.
- Area (min/max): Shows the minimum and maximum temperatures within a defined area.
- Isotherm (above/below): Highlights areas above or below a set temperature threshold.
Custom settings, including locking the temperature range and configuring the preferred color palette, can be adjusted via the camera's menu.
Figure 4: FLIR i7 menu interface for adjusting settings and measurement modes.
Capturing and Storing Images
To capture a thermal image, press the trigger button. The image will be saved automatically to the microSD card in JPEG format. The camera can store up to 5,000 radiometric images. Use the thumbnail gallery feature to quickly browse stored images.
Manteniment
Neteja de la càmera
Netegeu el cos de la càmera amb un drap suau iamp cloth. For the lens and screen, use a lens cleaning cloth and solution specifically designed for optics to avoid scratches. Do not use abrasive cleaners or solvents.
Cura de la bateria
To prolong battery life, avoid fully discharging the battery frequently. Store the camera with a partially charged battery if it will not be used for extended periods. Recharge the battery as needed; it can be charged directly in the camera.
Emmagatzematge
When not in use, store the FLIR i7 in its hard carrying case in a cool, dry place, away from direct sunlight and extreme temperatures.
Resolució de problemes
La càmera no s'encén
- Ensure the battery is fully charged. Connect the camera to the AC adapter and allow it to charge for at least 30 minutes before attempting to power on again.
- Verify the battery is correctly inserted.
Images Are Blurry or Unclear
- Although the i7 has a focus-free lens, ensure there are no obstructions on the lens. Clean the lens with a soft, lint-free cloth if necessary.
- Ensure you are within the optimal measurement distance for the object.
Cannot Save Images
- Check if the microSD card is properly inserted.
- Verify that the microSD card is not full. If it is, transfer images to a computer and delete them from the card, or replace the card.
- Ensure the card is not write-protected (if applicable to the card type).
Software (QuickReport) Issues
- Ensure your computer meets the minimum system requirements for QuickReport software.
- Torneu a instal·lar el programari si els problemes persisteixen.
- Refer to the QuickReport software manual for specific troubleshooting steps.
Especificacions
| Atribut | Detall |
|---|---|
| Fabricant | Sistemes FLIR |
| Número de part | 60101-0301 |
| Pes de l'article | 12 unces |
| Dimensions del paquet | 15.7 x 12.1 x 5 polzades |
| Número de model de l'article | FLIR i7 |
| Mida | Compacte |
| Color | Blau/Gris |
| Estil | Estàndard |
| Quantitat de paquet d'articles | 1 |
| Piles incloses? | Sí |
| Necessites piles? | Sí |
| ASIN | B003V4BE20 |
| Data de primera disponibilitat | 30 d'octubre de 2009 |
Què hi ha a la caixa
- FLIR i7 Camera
- Targeta MicroSD
- MiniSD adapter
- Bateria recarregable
- AC adapter with EU, UK, US, and Australian plugs
- QuickReport software (on CD or download link)
- cable USB
- Corretja de mà
- Maletí de transport dur
- CD of Manual and Documentation
Informació de la garantia
The FLIR i7 is backed by a manufacturer's two-year limited warranty on parts and labor. For detailed warranty terms and conditions, please refer to the documentation included with your product or visit the official FLIR weblloc.
Suport
For technical support, service, or additional information, please contact FLIR Systems customer service. Refer to the contact details provided in the product documentation or on the official FLIR weblloc.
