Introducció
The Ansmann Energy 8 Plus is a universal battery charging and maintenance station designed for various rechargeable battery types. This device is capable of charging and maintaining 1-6 AAA or AA cells, 1-4 C or D cells, and 1-2 9V block batteries. It is compatible with NiMH and NiCd rechargeable batteries.
This manual provides essential information on the proper setup, operation, maintenance, and troubleshooting of your Ansmann Energy 8 Plus charger to ensure safe and efficient use.
Image: The Ansmann Energy 8 Plus charger, showcasing its multiple empty charging slots for various battery sizes.
Configuració
Desembalatge i inspecció inicial
- Carefully remove the Ansmann Energy 8 Plus charger from its packaging.
- Inspect the device for any signs of damage during transit. If any damage is observed, do not use the charger and contact customer support.
- Ensure all components are present: the Ansmann Energy 8 Plus charger unit and its power cable.
Connexió a l'alimentació
- Place the charger on a stable, flat, and non-flammable surface, away from direct sunlight or heat sources.
- Connect the power cable to the charger's input port.
- Plug the other end of the power cable into a standard electrical outlet (100-240V AC, 50/60Hz).
- El carregador ja està llest per al seu ús.
Instruccions de funcionament
Inserció de piles
The Ansmann Energy 8 Plus supports various battery sizes and types. Ensure you are using only NiMH or NiCd rechargeable batteries. Do not attempt to charge non-rechargeable batteries.
- AAA/AA Cells: Insert 1-6 AAA or AA batteries into the designated slots, ensuring correct polarity (+ and -).
- C/D Cells: Insert 1-4 C or D batteries into the larger slots, ensuring correct polarity.
- 9V Block Batteries: Insert 1-2 9V block batteries into the dedicated 9V terminals, ensuring correct polarity.
Image: The Ansmann Energy 8 Plus charger with AAA, AA, C, D, and 9V batteries correctly inserted into their respective charging bays.
The charger features individual monitoring for each battery slot, allowing for simultaneous charging of different battery types and capacities. The device automatically detects defective or incorrectly inserted batteries (e.g., reversed polarity or disposable batteries) and will not attempt to charge them.
Charging Process and Indicators
The Ansmann Energy 8 Plus automatically initiates the charging process upon battery insertion. It includes a refreshing and recharge process, and can even "revive" some damaged batteries.
The charger is equipped with LED indicators for each charging bay to display the status:
- LED vermell (parpellejant): Indicates a defective battery or incorrect insertion. Remove the battery and check.
- LED vermell (sòlid): La bateria s'està carregant actualment.
- LED verd (sòlid): Charging is complete, and the charger has switched to trickle charge mode to maintain the battery's full capacity.
The charger incorporates multiple overcharging protection mechanisms and automatically completes the charging process, switching to trickle charge to prevent battery damage.
Image: The Ansmann Energy 8 Plus charger actively charging batteries, with visible LED indicators showing charging status.
Manteniment
Neteja del carregador
- Desendolleu sempre el carregador de la presa de corrent abans de netejar-lo.
- Feu servir un drap suau i sec per netejar l'exterior del carregador.
- Do not use liquid cleaners, abrasive pads, or chemical solvents, as these can damage the device.
- Ensure no dust or debris accumulates in the battery slots. Use a soft brush or compressed air if necessary.
Emmagatzematge
- Quan no l'utilitzeu, guardeu el carregador en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
- It is recommended to unplug the charger when not in use for extended periods, as the internal power supply may remain slightly warm.
Resolució de problemes
If you encounter issues with your Ansmann Energy 8 Plus charger, please refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| El carregador no s'encén. | Sense font d'alimentació; connexió fluixa. | Ensure the power cable is securely plugged into both the charger and the wall outlet. Check if the outlet is functional. |
| Red LED blinking for a battery. | Defective battery; incorrect battery type (non-rechargeable); reversed polarity. | Remove the battery and re-insert it with correct polarity. Ensure it is a NiMH or NiCd rechargeable battery. If the LED still blinks, the battery may be defective and should be replaced. |
| Batteries not charging or taking too long. | Battery capacity too high for charging current; very deeply discharged battery. | Allow more time for charging, especially for high-capacity batteries. The charger may be performing a refreshing cycle for deeply discharged batteries. |
| El carregador s'escalfa durant el funcionament. | Funcionament normal; ventilació insuficient. | It is normal for the charger to become warm during charging. Ensure it is placed on a hard, flat surface with adequate ventilation. If it becomes excessively hot, unplug it immediately and contact support. |
If the problem persists after attempting these solutions, please contact Ansmann customer support.
Especificacions
| Característica | Detall |
|---|---|
| Dimensions del producte | 8 x 3 x 10.5 polzades |
| Pes de l'article | 1.33 lliures (605 grams) |
| Fabricant | Ansmann USA Corporation |
| Número de model | 5207442/EUA |
| Tipus de bateries compatibles | NiMH/NiCd rechargeable batteries |
| Mides de bateria admeses | AAA, AA, C, D, 9V |
| Charging Currents | 1000mA (AA, C, D), 400mA (AAA), 60mA (9V) |
| Vol. De sortidatage | 1.2 Volts |
| Color | Blau |
| Data de primera disponibilitat | 9 de juliol de 2010 |
Image: The Ansmann Energy 8 Plus charger connected and in use amidst various electronic testing equipment, highlighting its professional application.
Informació de la garantia
The Ansmann Energy 8 Plus charger typically comes with a manufacturer's warranty. Based on available information, Ansmann products often include a 3-year warranty. Please refer to the original product packaging or the official Ansmann website for the most accurate and up-to-date warranty terms and conditions specific to your region.
Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.
Image: The retail packaging for the Ansmann Energy 8 Plus charger, displaying product features and a "3 Jahre Warranty" (3 Years Warranty) badge.
Suport i Contacte
For further assistance, technical support, or warranty inquiries, please contact Ansmann customer service.
- Oficial Weblloc: Visita el Ansmann official weblloc for product information and support contacts.
- Manual d'usuari (PDF): Podeu descarregar una versió detallada del manual d'usuari en PDF: Descarrega el manual d'usuari.
- Fabricant: Ansmann USA Corporation
When contacting support, please have your product model number (5207442/US) and purchase details ready.
