Producte acabatview
The Kett KD-1495 Fiber Cement Shear is a powerful electric cutting tool designed for professional contractors, builders, and manufacturers. It provides efficient and clean cuts through various materials, including fiber cement, metal, plaster, and asphalt shingles, with minimal airborne dust.
Figure 1: The Kett KD-1495 Fiber Cement Shear, a robust electric tool for cutting various materials.
Equipat amb un 5.0 amp motor and A-2 tool steel blades, the KD-1495 offers a cutting speed of up to 2500 RPM, allowing for rapid completion of tasks. Its ergonomic design ensures comfortable operation and helps prevent ragged edges, leaving a thin waste strip.
Muntatge i preparació
1. Desembalatge i inspecció
Carefully remove the Kett KD-1495 shear from its packaging. Inspect the tool for any signs of damage that may have occurred during shipping. Ensure all components, including the shear unit, power cord, and any included accessories (such as lubricant and wrenches), are present and in good condition. If any damage or missing parts are found, do not operate the tool and contact Kett customer support immediately.
2. Connexió d'alimentació
The KD-1495 operates on standard electrical power. Before plugging in the tool, ensure the power switch is in the "OFF" position. Connect the power cord to a grounded electrical outlet that matches the voltage requirements specified on the tool's label. Always use an extension cord that is rated for the tool's power requirements and is in good condition.
Instruccions de funcionament
1. Funcionament general
To start the shear, firmly grasp the handle and depress the trigger switch. The tool features variable speed control, allowing you to adjust the RPM up to 2500 to match the demands of your cutting task. Release the trigger to stop the tool.
Figure 2: The ergonomic design of the KD-1495 ensures comfortable handling and facilitates clean cuts with minimal airborne dust.
2. Cutting Various Materials
The KD-1495 is designed for versatility, capable of cutting:
- Fiber Cement: Up to 5/8" thick, including James Hardie Board. The shear gently cuts through the material, significantly reducing airborne dust compared to traditional methods.
- Metall: Up to 18-gauge cold-rolled mild steel.
- Guix: Various thicknesses.
- Asphalt Shingles: For roofing and other applications.
Figure 3: The KD-1495 is capable of smooth cuts through fiber cement, metal, plaster, and asphalt shingles.
3. Tècniques de tall
For straight cuts, guide the shear along your marked line, maintaining steady pressure. The tool is designed to leave a thin waste strip, ensuring a clean edge. When cutting large sheets, especially fiber cement, it is recommended to support the piece being cut off to prevent premature breaking, as the material can be brittle. A common technique is to cut from both ends towards the center, supporting the loose piece as the cuts meet.
While primarily designed for straight cuts, the KD-1495 can make large radius curves. For intricate or sharp turns, multiple straight cuts or alternative tools may be required.
4. Safety Precautions During Operation
- Utilitzeu sempre equips de protecció personal (EPI) adequats, com ara ulleres de seguretat, guants i protecció auditiva.
- Ensure your work area is well-lit and clear of obstructions.
- Secure the material being cut to prevent movement during operation.
- Keep hands and fingers away from the cutting blades.
- Operate the tool in a well-ventilated area, especially when cutting materials that may produce fine dust, even if minimal.
Manteniment
Regular maintenance ensures the longevity and optimal performance of your Kett KD-1495 shear.
1. Cura de la fulla
The KD-1495 utilizes durable A-2 tool steel blades. Periodically inspect the blades for wear, damage, or dullness. Worn blades can affect cutting performance and increase strain on the motor. Replacement blades are available from Kett Tool Company. Refer to the included manual for instructions on blade replacement, which may require specific tools (wrenches are included).
Figure 4: Key components of the KD-1495, including the durable A-2 Steel Blades and the long-lasting Aluminium Head.
2. Neteja
After each use, especially when cutting dusty materials like fiber cement, clean the shear to remove any accumulated debris. Use a dry cloth or soft brush to wipe down the tool. Avoid using solvents or harsh chemicals that could damage the tool's finish or internal components. Ensure the ventilation openings on the motor housing are clear to prevent overheating.
3. Lubricació
A tube of lubricant is included with your KD-1495. Apply lubricant to the moving parts of the shear head as recommended in the detailed product manual to ensure smooth operation and reduce wear. Follow the specific lubrication points and frequency outlined in the manual.
4. Emmagatzematge
Store the KD-1495 in a clean, dry place, away from direct sunlight and extreme temperatures. Protect the blades from damage during storage. While a dedicated storage case is not included, consider a suitable container to protect the tool and keep accessories organized.
Resolució de problemes
This section addresses common issues you might encounter with your Kett KD-1495 shear.
| Problema | Causa possible | Solució |
|---|---|---|
| L'eina no s'inicia. | No power supply; power cord damaged; trigger switch faulty. | Comproveu la presa de corrent i el cable. Assegureu-vos que l'interruptor estigui completament activat. Si el problema persisteix, busqueu un servei professional. |
| Poor cutting performance or ragged edges. | Dull or damaged blades; incorrect cutting technique; material too thick. | Inspect and replace blades if necessary. Review operating instructions for proper technique. Ensure material is within specified thickness limits (e.g., 5/8" fiber cement, 18-gauge metal). |
| Tool jumps or vibrates excessively. | Improper material support; dull blades; material type. | Ensure material is securely supported, especially the off-cut piece. Check blade sharpness. Some materials may require a specific approach. |
| Sobreescalfament durant el funcionament. | Ranures de ventilació bloquejades; ús intensiu continu. | Clear any debris from ventilation slots. Allow the tool to cool down during prolonged use. |
For issues not listed here or if solutions do not resolve the problem, contact Kett Tool Company customer support.
Especificacions
Detailed technical specifications for the Kett KD-1495 Fiber Cement Shear:
- Número de model: KD-1495
- Marca: Kett
- Color: Gris
- Material: A-2 Tool Steel (Blades), Metal/Steel (Handle)
- Estil: Fiber Cement Shear
- Font d'alimentació: Elèctric amb cable
- Motor: 5.0 Amp
- RPM: Up to 2500 RPM (Variable Speed)
- Capacitat de tall:
- Fiber Cement: Up to 5/8" thick
- Metal: Up to 18-gauge cold-rolled mild steel
- Plaster, Asphalt Shingles
- Pes de l'article: 4.5 lliures
- Dimensions del producte: 15.8 x 9 x 3.6 polzades
- Bord de la fulla: Recte
- Tipus d'acabat: Recobert de pols
- Orientació de la mà: Ambidextre
- UPC: 014848521955
- Fabricant: Kett
- Data de primera disponibilitat: 17 de febrer de 2010
Informació de la garantia
The Kett KD-1495 Fiber Cement Shear comes with a Garantia limitada d'1 any from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For specific terms, conditions, and to make a warranty claim, please refer to the official warranty documentation provided with your product or contact Kett Tool Company directly.
Atenció al client
For any questions, technical assistance, or service requests regarding your Kett KD-1495 Fiber Cement Shear, please contact Kett Tool Company customer support. You can find more information and contact details on the official Kett Tool Company weblloc web o a través de la seva botiga de la marca Amazon:
