Tamiya Polycarbonate PS-60 Bright Mica Red Spray Paint Instruction Manual

1. Introducció i presentació del producteview

The Tamiya Polycarbonate PS-60 Bright Mica Red Spray Paint is specifically formulated for decorating transparent polycarbonate bodies commonly used in R/C car modeling. Each can contains 100ml of paint, which is typically sufficient for painting one complete model body. This paint is designed for application to the interior surface of the body shell, a method distinct from painting traditional plastic models. Once cured, the paint is resistant to oil and fuels, making it suitable for gas-powered R/C bodies.

Nota important: This paint is exclusively for polycarbonate surfaces. Do not use this product on standard plastic models.

Image 1.1: A 100ml aerosol can of Tamiya Polycarbonate PS-60 Bright Mica Red spray paint, designed for RC car bodies.

2. Informació i precaucions de seguretat

This product is an aerosol spray paint and requires careful handling. Adhere to all safety warnings printed on the product label and packaging.

• PERILL: Extremely flammable. Keep away from heat, hot surfaces, sparks, open flames, and other ignition sources. No smoking.
• Contains Acetone and harmful solvents. May be fatal if concentrated and inhaled. Use only in a well-ventilated area. Avoid breathing vapor or spray mist.
• Contents under pressure. Do not puncture or incinerate can. Do not expose to temperatures exceeding 120°F (49°C).
• Mantenir fora de l'abast dels nens.
• Wear appropriate personal protective equipment, including gloves and eye protection, during application.
• Ensure adequate ventilation to prevent vapor accumulation.
• Eliminar el contingut/envàs d'acord amb la normativa local.

3. Configuració i preparació

Proper preparation is crucial for achieving optimal results and paint adhesion.

1. Clean the Polycarbonate Body: Thoroughly wash the inside of the polycarbonate body shell with mild soap (such as dish detergent) and lukewarm water. This removes any mold release agents, oils, or dust. Rinse completely and allow the body to air dry fully. Ensure no water spots or residue remain.
2. Emmascarament: Mask off any areas you do not wish to paint, such as windows, headlights, or specific design elements, using high-quality masking tape designed for model painting. Ensure all edges are firmly pressed down to prevent paint bleed.
3. Ventilació: Work in a well-ventilated area, preferably outdoors or in a spray booth with proper exhaust.
4. Shake the Can: Shake the spray can vigorously for at least one minute after the mixing ball begins to rattle. Continue shaking periodically during application to ensure consistent color and finish.
5. Spray de prova: Before applying to the model, perform a test spray on a scrap piece of polycarbonate or similar material to check the color and spray pattern.

4. Operating Instructions (Paint Application)

Follow these steps for effective application of Tamiya PS-60 spray paint.

1. Distància: Hold the spray can approximately 30 cm (12 inches) away from the interior surface of the polycarbonate body.
2. Thin Coats: Apply paint in thin, even coats. Do not attempt to achieve full coverage in a single pass. Multiple thin coats will provide a smoother finish and prevent runs or drips.
3. Drying Time Between Coats: Allow each thin coat to dry for approximately 5-10 minutes (or until touch-dry) before applying the next. This prevents solvent trapping and ensures proper adhesion.
4. Capes: Continue applying thin coats until the desired color depth and opacity are achieved. For metallic or mica colors like PS-60 Bright Mica Red, multiple coats are often necessary to bring out the full effect.
5. Backing Color (Optional but Recommended): For brighter, more vibrant results and to protect the paint, it is often recommended to apply a backing color (e.g., Tamiya PS-1 White or PS-5 Black) after the main color has fully dried. This helps the color stand out and prevents light from shining through.
6. Final Cure: After the final coat (and backing color, if used) has been applied, allow the paint to cure completely. The recommended dry time is approximately 3 hours, but full hardness may take longer. Avoid handling the painted body excessively during this period.

5. Manteniment i emmagatzematge

• Neteja del broquet: After each use, invert the can and spray for a few seconds until only clear propellant comes out. This clears the nozzle and prevents clogging. Wipe the nozzle clean with a cloth.
• Emmagatzematge: Store the spray can in a cool, dry, well-ventilated area, away from direct sunlight, heat sources, and open flames. Ensure the cap is securely placed on the can.
• Temperatura: Avoid storing in temperatures exceeding 120°F (49°C) or below freezing.
• Eliminació: Dispose of empty cans or unused paint according to local hazardous waste regulations. Do not puncture or incinerate.

6. Solució De Problemes

7. Especificacions del producte

8. Informació de la garantia

Tamiya products are manufactured to high-quality standards. Specific warranty details for this spray paint are not provided in the product information. For any concerns regarding product defects or performance, please retain your proof of purchase and contact Tamiya customer support or your retailer directly.

9. Atenció al client

For further assistance, technical questions, or product inquiries, please refer to the official Tamiya website or contact their customer service department. Contact information can typically be found on the product packaging or the official Tamiya weblloc.

Recursos en línia: Visit Tamiya's Official Weblloc