Manual d'instruccions del SAI d'ona sinusoidal CyberPower CP1350PFCLCD PFC

1. Producte acabatview

The CyberPower CP1350PFCLCD is a mini-tower Uninterruptible Power Supply (UPS) system designed to provide battery backup and surge protection. It features sine wave output, making it compatible with active Power Factor Correction (PFC) and conventional power supplies. This unit safeguards desktop computers, workstations, networking devices, and home entertainment systems from power fluctuations and outages. An advanced multifunction color LCD panel provides real-time status and alerts, with a tilt feature for optimal viewing.

The UPS incorporates Automatic Voltage Regulation (AVR) to stabilize incoming utility power, correcting minor voltage fluctuations without engaging the battery, thereby extending battery life.

Figura 1: Frontal view of the CyberPower CP1350PFCLCD UPS, showing the LCD display and control buttons.

2. Configuració

2.1 Desembalatge i inspecció inicial

Carefully remove the UPS from its packaging. Inspect the unit for any signs of damage. Ensure all components, including the power cord and user manual, are present.

2.2 Connexió de la bateria

The UPS battery may be disconnected for shipping. To connect the battery:

1. Locate the battery compartment cover, typically at the bottom or side of the unit.
2. Remove the cover by sliding it or unscrewing retaining screws.
3. Connect the internal battery cables (red to red, black to black) as indicated. Ensure connections are secure.
4. Substituïu la tapa del compartiment de la bateria.

2.3 Connexió a l'alimentació i als dispositius

Plug the UPS power cord into a grounded wall outlet. Connect your computer, monitor, and other critical equipment to the battery backup and surge-protected outlets on the rear of the UPS. Non-critical devices can be connected to surge-only outlets.

Figura 2: posterior view of the UPS, showing 12 NEMA 5-15R outlets (six battery backup & surge protected, six surge protected), network ports, USB, and serial port.

3. Instruccions de funcionament

3.1 Engegada/apagada

To power on the UPS, press and hold the power button on the front panel until the LCD screen illuminates. To power off, press and hold the power button again until the display turns off.

3.2 Pantalla LCD i controls

The multifunction color LCD panel displays real-time information about the UPS status. Use the 'DISPLAY' button to cycle through various screens, including:

• Entrada Voltage: Shows the incoming utility power voltage.
• Vol. De sortidatage: Mostra el voltage supplied by the UPS to connected devices.
• Capacitat de la bateria: Indicates the current charge level of the battery.
• Càrrega actual: Shows the power consumption of connected devices.
• Temps d'execució estimat: Provides an approximation of how long the UPS can power connected devices during an outage.
• Registre d'esdeveniments: Registra esdeveniments d'energia com ara outages o sobretensions.

The screen can be tilted up to 22 degrees for better viewangles d'ajust.

Figure 3: Close-up of the LCD panel displaying various status icons and real-time data.

3.3 Volum automàtictagReglament (AVR)

The UPS automatically activates AVR to correct minor voltage fluctuations (sags or surges) without switching to battery power. This ensures a stable power supply to your devices and prolongs battery life.

3.4 ports de càrrega USB

The front panel includes USB-A and USB-C ports for convenient charging of mobile devices, even during a power outage.

4. Manteniment

4.1 Substitució de la bateria

Over time, UPS batteries will degrade and require replacement. The CP1350PFCLCD uses two 12V sealed lead-acid batteries. The LCD panel may display an error code (e.g., E21) or a 'REPLACE' icon when the battery needs attention.

Procedure for Battery Replacement:

1. Ensure the UPS is turned off and disconnected from the wall outlet.
2. Remove the battery compartment cover (usually secured by two Phillips screws).
3. Carefully disconnect the battery terminals (red and black) from the old batteries. Note the orientation for proper re-connection.
4. Remove the old batteries. They may be snug and require gentle nudging.
5. Insert the new batteries, ensuring they fit correctly.
6. Connect the new battery terminals (red to red, black to black). A small spark may occur during the final connection; this is normal.
7. Replace the battery compartment cover and secure it with screws.

For a visual guide on battery replacement, refer to the official product video below:

4.2 Atenció general

Keep the UPS in a well-ventilated area, free from dust and moisture. Avoid placing it near heat sources. Regularly check for any loose connections or signs of wear.

5. Solució De Problemes

If your UPS is not functioning as expected, refer to the following common issues:

6. Especificacions

• Model: CP1350PFCLCD
• Capacitat: 1350 VA / 880 W
• Topologia: Line Interactive with PFC Sinewave Output
• Punts de venda: 12 NEMA 5-15R (6 Battery Backup & Surge Protected, 6 Surge Protected)
• Entrada Voltage: 120 Volts
• Tipus de bateria: Plom-àcid segellat (2 piles de 12V incloses)
• Volum automàtictage Regulació (AVR): Sí
• Visualització: Multifunction Color LCD Panel
• Dimensions: 14.2 x 3.9 x 10.4 polzades
• Pes de l'article: 20.3 lliures

7. Garantia i Suport

The CyberPower CP1350PFCLCD comes with a garantia de tres anys, que inclou la cobertura de les bateries. A més, està recolzat per un Garantia d'equipament connectat de 425,000 $, providing peace of mind for your connected electronics.

For further support, troubleshooting, or warranty claims, please visit the official CyberPower weblloc o poseu-vos en contacte amb el seu servei d'atenció al client.