Sauder Shoal Creek Dresser Furniture User Manual

1. Introducció

This manual provides comprehensive instructions for the assembly, operation, and maintenance of your Sauder Shoal Creek Dresser. Designed with an Oiled Oak finish, this dresser offers ample storage with its six drawers, including four extra-deep lower drawers. Please read this manual thoroughly before beginning assembly or use to ensure proper setup and longevity of your furniture.

Figure 1.1: Sauder Shoal Creek Dresser, front view, espectacleasing its six drawers and Oiled Oak finish.

2. Informació important de seguretat

La vostra seguretat és primordial. Si us plau, seguiu les següents pautes de seguretat:

• Prevenció de bolcades: This dresser has been safety tested for stability to help reduce tip-over accidents. It meets ASTM International's industry standard ASTM F2057-19 Safety Specification for Clothing Storage Units, which is intended to reduce hazards to children 5 and under due to tip-over of furniture. Always use the included anti-tip hardware to secure the dresser to a wall.
• Muntatge: Assembly requires at least two people due to the weight of the components (approximately 150 pounds in total). Do not attempt to assemble alone.
• Capacitat de pes: No sobrecarregueu els calaixos. Distribuïu el pes uniformement.
• Nens i animals de companyia: Mantingueu els nens i les mascotes allunyats de la zona de muntatge. Les peces petites poden ser un perill d'asfíxia.
• Eines: Utilitzeu només les eines recomanades per al muntatge.
• Parts danyades: Do not assemble or use if any parts are damaged or missing. Contact customer support immediately.

3. Llista de peces

Before beginning assembly, verify that all components are present and undamaged. Refer to the packing list included with your product for specific part numbers and quantities. General components include:

• Panell superior
• Side Panels (Left and Right)
• Tauler base
• Back Panel (essential for structural integrity)
• Drawer Fronts (6 total)
• Drawer Sides, Backs, and Bottoms
• Drawer Slides/Runners (metal)
• Drawer Pulls/Handles
• Assembly Hardware (screws, cam locks, dowels, nails, anti-tip kit)

Figure 3.1: Dimensional diagram of the dresser, indicating overall dimensions and internal drawer measurements for both upper and lower drawers.

4. Muntatge i muntatge

Assembly is required. Follow the step-by-step instructions provided in the separate assembly guide included with your product. Key points to remember:

• Preparació: Clear a spacious area for assembly. Lay out all parts on a soft, clean surface to prevent scratches.
• Eines necessàries: A Phillips head screwdriver and a hammer are typically needed.
• Assemblea d'equip: This is a two-person assembly job. Do not attempt to lift or move the packaged product or assembled frame alone.
• T-Lock Assembly System: The drawers feature a patented T-lock assembly system for quick and easy assembly. Ensure all T-locks are fully engaged.
• Tauler posterior: The back panel is crucial for the dresser's structural integrity and to keep it square. Do not stand or use the dresser without attaching the back panel securely.
• Orientació del calaix: Pay close attention to the orientation of drawer parts, especially the "Q" and "R" labeled parts, as they may appear identical but are designed for specific sides to ensure proper flush closure.
• Drawer Slide Adjustment: Drawer slides have adjustable cams. Do not fully tighten screws on the slide tracks until you can adjust the drawer fit. This allows for fine-tuning if drawers are slanted or not closing properly.

Figure 4.1: The dresser integrated into a room, demonstrating its functional and aesthetic appeal.

5. Instruccions de funcionament

The Sauder Shoal Creek Dresser is designed for easy and smooth operation.

• Ús del calaix: Gently pull drawers open and push them closed. The metal runners and safety stops ensure smooth operation.
• Emmagatzematge: The four lower drawers are extra deep, ideal for storing bulky clothing items. The upper drawers are suitable for smaller items.
• Funció de tancament suau: This dresser is equipped with a soft close feature for quiet and gentle drawer closure.

6. Cura i Manteniment

To maintain the beauty and longevity of your dresser:

• Neteja: Netegeu les superfícies amb un suau, damp cloth. Avoid harsh chemicals or abrasive cleaners, which can damage the Oiled Oak finish.
• Vessaments: Netegeu els vessaments immediatament per evitar taques o danys a la fusta dissenyada.
• Llum solar: Avoid prolonged exposure to direct sunlight, which can cause fading.
• Humitat: Maintain a stable room temperature and humidity level to prevent warping or cracking.
• Maquinari: Reviseu i estrenyeu periòdicament totes les connexions de maquinari per garantir l'estabilitat.

Figura 6.1: Detallada view of the Oiled Oak finish, highlighting its texture and color.

7. Solució De Problemes

If you encounter issues with your dresser, consider the following common solutions:

• Drawers Not Closing Flush:
  • Ensure the correct drawer (left/right) is in the correct slot.
  • Adjust the cam locks on the drawer slides. Loosen the screws slightly, adjust the cam, and then re-tighten.
  • Check if any screws are protruding and obstructing the drawer path.
• Dresser Feels Unstable/Wobbly:
  • Verify that the back panel is securely attached. The back panel is vital for squaring the unit.
  • Ensure all assembly hardware (screws, cam locks) are fully tightened.
  • Confirm the dresser is on a level surface.
  • Ensure the anti-tip hardware is properly installed and secured to the wall.
• Peces danyades o que falten: Do not proceed with assembly. Contact Sauder customer support for replacement parts.

8. Especificacions del producte

9. Informació de la garantia

Your Sauder Shoal Creek Dresser comes with a Garantia limitada d'5 any. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full details regarding warranty coverage and exclusions, refer to the warranty documentation included with your product or visit the official Sauder weblloc.

10. Atenció al client

For assistance with assembly, missing parts, or any other inquiries, please contact Sauder customer support:

• Weblloc: Visit the official Sauder weblloc web per a preguntes freqüents i recursos de suport.
• Telèfon: Refer to the contact information provided in your product packaging for direct phone support.
• Formulari en línia: Many issues can be resolved by submitting a request through their online contact form.

Quan contacteu amb el servei d'assistència, tingueu a mà el número de model (410287) i el comprovant de compra.